linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-iio@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
	Oskar Andero <oskar.andero@gmail.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald <pmeerw@pmeerw.net>
Subject: [PATCH] iio: adc: mcp320x: support more differential voltage measurement
Date: Fri,  8 Jan 2016 00:40:30 +0900	[thread overview]
Message-ID: <1452181230-21877-1-git-send-email-akinobu.mita@gmail.com> (raw)

mcp320x driver supports the pseudo-differential mode by
in_voltage'IN+'-voltage'IN-'_raw where (IN+, IN-) = (0, 1), (2, 3), ...

mcp320x chips except MCP3X01 can also select swapped IN+ and IN-
pairs in the pseudo-differential mode.
i.e. in_voltage'IN+'-voltage'IN-'_raw where (IN+, IN-) = (1, 0),
(3, 2), ...

If the voltage level of IN+ is equal to or less than IN-, the
resultant code will be 000h.  So it is useful to provide these, too.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Oskar Andero <oskar.andero@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
---
 drivers/iio/adc/mcp320x.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index 8569c8e..a9c4acd 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -187,26 +187,27 @@ out:
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
 	}
 
-#define MCP320X_VOLTAGE_CHANNEL_DIFF(num)			\
+#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2)		\
 	{							\
 		.type = IIO_VOLTAGE,				\
 		.indexed = 1,					\
-		.channel = (num * 2),				\
-		.channel2 = (num * 2 + 1),			\
-		.address = (num * 2),				\
+		.channel = (chan1),				\
+		.channel2 = (chan2),				\
+		.address = (chan1),				\
 		.differential = 1,				\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
 	}
 
 static const struct iio_chan_spec mcp3201_channels[] = {
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
 };
 
 static const struct iio_chan_spec mcp3202_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(0),
 	MCP320X_VOLTAGE_CHANNEL(1),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
 };
 
 static const struct iio_chan_spec mcp3204_channels[] = {
@@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(1),
 	MCP320X_VOLTAGE_CHANNEL(2),
 	MCP320X_VOLTAGE_CHANNEL(3),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
 };
 
 static const struct iio_chan_spec mcp3208_channels[] = {
@@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(5),
 	MCP320X_VOLTAGE_CHANNEL(6),
 	MCP320X_VOLTAGE_CHANNEL(7),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(1),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(2),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6),
 };
 
 static const struct iio_info mcp320x_info = {
-- 
2.5.0


             reply	other threads:[~2016-01-07 15:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-07 15:40 Akinobu Mita [this message]
2016-01-09 16:28 ` [PATCH] iio: adc: mcp320x: support more differential voltage measurement Jonathan Cameron
2016-01-16 13:04   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452181230-21877-1-git-send-email-akinobu.mita@gmail.com \
    --to=akinobu.mita@gmail.com \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=oskar.andero@gmail.com \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).