From: Lars-Peter Clausen <lars@metafoo.de>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>,
Peter Meerwald <pmeerw@pmeerw.net>,
linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2] staging:iio:ad7606: Consolidate PM ops
Date: Mon, 8 Feb 2016 11:13:29 +0100 [thread overview]
Message-ID: <1454926409-3178-1-git-send-email-lars@metafoo.de> (raw)
Both the SPI and platform device driver for the ad7606 use the same set of
PM ops. Consolidate them in the common part of the driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
Changes since v1:
* Rebased onto latest iio/testing
---
drivers/staging/iio/adc/ad7606.h | 10 ++++++++--
drivers/staging/iio/adc/ad7606_core.c | 19 +++++++++++++++----
drivers/staging/iio/adc/ad7606_par.c | 32 +-------------------------------
drivers/staging/iio/adc/ad7606_spi.c | 32 +-------------------------------
4 files changed, 25 insertions(+), 68 deletions(-)
diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h
index ec89d05..cca9469 100644
--- a/drivers/staging/iio/adc/ad7606.h
+++ b/drivers/staging/iio/adc/ad7606.h
@@ -85,8 +85,6 @@ struct ad7606_bus_ops {
int (*read_block)(struct device *, int, void *);
};
-void ad7606_suspend(struct iio_dev *indio_dev);
-void ad7606_resume(struct iio_dev *indio_dev);
struct iio_dev *ad7606_probe(struct device *dev, int irq,
void __iomem *base_address, unsigned id,
const struct ad7606_bus_ops *bops);
@@ -101,4 +99,12 @@ enum ad7606_supported_device_ids {
int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev);
void ad7606_ring_cleanup(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops ad7606_pm_ops;
+#define AD7606_PM_OPS (&ad7606_pm_ops)
+#else
+#define AD7606_PM_OPS NULL
+#endif
+
#endif /* IIO_ADC_AD7606_H_ */
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 263f981..fe6caee 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -560,8 +560,11 @@ int ad7606_remove(struct iio_dev *indio_dev, int irq)
}
EXPORT_SYMBOL_GPL(ad7606_remove);
-void ad7606_suspend(struct iio_dev *indio_dev)
+#ifdef CONFIG_PM_SLEEP
+
+static int ad7606_suspend(struct device *dev)
{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ad7606_state *st = iio_priv(indio_dev);
if (gpio_is_valid(st->pdata->gpio_stby)) {
@@ -569,11 +572,13 @@ void ad7606_suspend(struct iio_dev *indio_dev)
gpio_set_value(st->pdata->gpio_range, 1);
gpio_set_value(st->pdata->gpio_stby, 0);
}
+
+ return 0;
}
-EXPORT_SYMBOL_GPL(ad7606_suspend);
-void ad7606_resume(struct iio_dev *indio_dev)
+static int ad7606_resume(struct device *dev)
{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ad7606_state *st = iio_priv(indio_dev);
if (gpio_is_valid(st->pdata->gpio_stby)) {
@@ -584,8 +589,14 @@ void ad7606_resume(struct iio_dev *indio_dev)
gpio_set_value(st->pdata->gpio_stby, 1);
ad7606_reset(st);
}
+
+ return 0;
}
-EXPORT_SYMBOL_GPL(ad7606_resume);
+
+SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
+EXPORT_SYMBOL_GPL(ad7606_pm_ops);
+
+#endif
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c
index adc370e..84d2393 100644
--- a/drivers/staging/iio/adc/ad7606_par.c
+++ b/drivers/staging/iio/adc/ad7606_par.c
@@ -90,36 +90,6 @@ static int ad7606_par_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static int ad7606_par_suspend(struct device *dev)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
- ad7606_suspend(indio_dev);
-
- return 0;
-}
-
-static int ad7606_par_resume(struct device *dev)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
- ad7606_resume(indio_dev);
-
- return 0;
-}
-
-static const struct dev_pm_ops ad7606_pm_ops = {
- .suspend = ad7606_par_suspend,
- .resume = ad7606_par_resume,
-};
-
-#define AD7606_PAR_PM_OPS (&ad7606_pm_ops)
-
-#else
-#define AD7606_PAR_PM_OPS NULL
-#endif /* CONFIG_PM */
-
static const struct platform_device_id ad7606_driver_ids[] = {
{
.name = "ad7606-8",
@@ -142,7 +112,7 @@ static struct platform_driver ad7606_driver = {
.id_table = ad7606_driver_ids,
.driver = {
.name = "ad7606",
- .pm = AD7606_PAR_PM_OPS,
+ .pm = AD7606_PM_OPS,
},
};
diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c
index cbb3631..d873a51 100644
--- a/drivers/staging/iio/adc/ad7606_spi.c
+++ b/drivers/staging/iio/adc/ad7606_spi.c
@@ -62,36 +62,6 @@ static int ad7606_spi_remove(struct spi_device *spi)
return ad7606_remove(indio_dev, spi->irq);
}
-#ifdef CONFIG_PM
-static int ad7606_spi_suspend(struct device *dev)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
- ad7606_suspend(indio_dev);
-
- return 0;
-}
-
-static int ad7606_spi_resume(struct device *dev)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
- ad7606_resume(indio_dev);
-
- return 0;
-}
-
-static const struct dev_pm_ops ad7606_pm_ops = {
- .suspend = ad7606_spi_suspend,
- .resume = ad7606_spi_resume,
-};
-
-#define AD7606_SPI_PM_OPS (&ad7606_pm_ops)
-
-#else
-#define AD7606_SPI_PM_OPS NULL
-#endif
-
static const struct spi_device_id ad7606_id[] = {
{"ad7606-8", ID_AD7606_8},
{"ad7606-6", ID_AD7606_6},
@@ -103,7 +73,7 @@ MODULE_DEVICE_TABLE(spi, ad7606_id);
static struct spi_driver ad7606_driver = {
.driver = {
.name = "ad7606",
- .pm = AD7606_SPI_PM_OPS,
+ .pm = AD7606_PM_OPS,
},
.probe = ad7606_spi_probe,
.remove = ad7606_spi_remove,
--
2.1.4
next reply other threads:[~2016-02-08 10:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-08 10:13 Lars-Peter Clausen [this message]
2016-02-08 18:31 ` [PATCH v2] staging:iio:ad7606: Consolidate PM ops Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454926409-3178-1-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).