[PATCH v3 0/2] iio: pressure: bmp280: add support for BMP180 and oversampling rate control

[Akinobu Mita <akinobu.mita@gmail.com>]

This series includes two patches: one that adds support for the BMP180
chip, and the second which adds configuration for the oversampling ratio
for both BMP180 and BMP280.

* v3
- use single line comment style where possible suggested by Jonathan Cameron
- remove double casts for calibration coefficients by using adequate data
  types, suggested by Jonathan Cameron
- fix oversampling register setting for bmp280, spotted by Vlad Dogaru

* v2
- split into two patches
- add error check for reading calibration data.
- s/be16_to_cpu(0)/cpu_to_be16(0)/
- default pressure oversampling ratio for bmp180 from x1 to x8
- add kconfig dependency to not select if bmp085-i2c is enabled
- create bmp280_chip_info includes all elements depending on the chip
- add ACPI ids for bmp180

Akinobu Mita (2):
  iio: pressure: bmp280: add support for BMP180
  iio: pressure: bmp280: add ability to control oversampling rate

 drivers/iio/pressure/Kconfig  |   5 +-
 drivers/iio/pressure/bmp280.c | 564 +++++++++++++++++++++++++++++++++++++++---
 2 files changed, 538 insertions(+), 31 deletions(-)

-- 
2.5.0