From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-pa0-f67.google.com ([209.85.220.67]:35405 "EHLO mail-pa0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751848AbcDXNwc (ORCPT ); Sun, 24 Apr 2016 09:52:32 -0400 Received: by mail-pa0-f67.google.com with SMTP id zy2so15374317pac.2 for ; Sun, 24 Apr 2016 06:52:31 -0700 (PDT) From: Akinobu Mita To: linux-iio@vger.kernel.org Cc: Akinobu Mita Subject: [PATCH v3 0/2] iio: pressure: bmp280: add support for BMP180 and oversampling rate control Date: Sun, 24 Apr 2016 22:52:09 +0900 Message-Id: <1461505931-21884-1-git-send-email-akinobu.mita@gmail.com> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org This series includes two patches: one that adds support for the BMP180 chip, and the second which adds configuration for the oversampling ratio for both BMP180 and BMP280. * v3 - use single line comment style where possible suggested by Jonathan Cameron - remove double casts for calibration coefficients by using adequate data types, suggested by Jonathan Cameron - fix oversampling register setting for bmp280, spotted by Vlad Dogaru * v2 - split into two patches - add error check for reading calibration data. - s/be16_to_cpu(0)/cpu_to_be16(0)/ - default pressure oversampling ratio for bmp180 from x1 to x8 - add kconfig dependency to not select if bmp085-i2c is enabled - create bmp280_chip_info includes all elements depending on the chip - add ACPI ids for bmp180 Akinobu Mita (2): iio: pressure: bmp280: add support for BMP180 iio: pressure: bmp280: add ability to control oversampling rate drivers/iio/pressure/Kconfig | 5 +- drivers/iio/pressure/bmp280.c | 564 +++++++++++++++++++++++++++++++++++++++--- 2 files changed, 538 insertions(+), 31 deletions(-) -- 2.5.0