[PATCH 2/5] iio: magn: ak8975: add Vid regulator

[Linus Walleij <linus.walleij@linaro.org>]

The AK8975 has two power sources: Vdd (analog voltage supply)
and Vid (digital voltage supply). Optionally also obtain the Vid
supply regulator and enable it.

If an error occurs when enabling one of the regulators: bail out.

Cc: Gregor Boirie <gregor.boirie@parrot.com>
Cc: Richard Leitner <dev@g0hl1n.net>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Rebase and rewrite on top of the patch fixing up the regulator
  usage.
ChangeLog v1->v2:
- Just obtain the other regulator exactly like the first without
  trying to be fancy.
---
 drivers/iio/magnetometer/ak8975.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index bc0770205b2d..62f73d9d38b4 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -379,6 +379,7 @@ struct ak8975_data {
 	u8			cntl_cache;
 	struct iio_mount_matrix orientation;
 	struct regulator	*vdd;
+	struct regulator	*vid;
 };
 
 /* Enable attached power regulator if any. */
@@ -400,6 +401,18 @@ static int ak8975_power_on(struct i2c_client *client)
 		return ret;
 	}
 
+	data->vid = devm_regulator_get(&client->dev, "vid");
+	if (IS_ERR(data->vid)) {
+		ret = PTR_ERR(data->vid);
+	} else {
+		ret = regulator_enable(data->vid);
+	}
+	if (ret) {
+		dev_warn(&client->dev,
+			 "Failed to enable specified Vid supply\n");
+		return ret;
+	}
+	return 0;
 }
 
 /* Disable attached power regulator if any. */
@@ -408,6 +421,7 @@ static void ak8975_power_off(const struct i2c_client *client)
 	const struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	const struct ak8975_data *data = iio_priv(indio_dev);
 
+	regulator_disable(data->vid);
 	regulator_disable(data->vdd);
 }
 
-- 
2.4.11