* [PATCH] iio: accel: hid-sensor-accel-3d: Add timestamp
@ 2016-11-18 18:33 Srinivas Pandruvada
2016-11-19 13:19 ` Jonathan Cameron
0 siblings, 1 reply; 3+ messages in thread
From: Srinivas Pandruvada @ 2016-11-18 18:33 UTC (permalink / raw)
To: jic23; +Cc: linux-iio, Srinivas Pandruvada
Added timestamp channel. With this change, each sample has a timestamp.
This timestamp can be from the sensor hub when present or local kernel
timestamp. HID sensors can send timestamp with input data using usage id
HID_USAGE_SENSOR_TIME_TIMESTAMP.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
drivers/iio/accel/hid-sensor-accel-3d.c | 29 +++++++++++++++++++++--------
include/linux/hid-sensor-ids.h | 1 +
2 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index ab1e238..41215b6 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -42,11 +42,13 @@ struct accel_3d_state {
struct hid_sensor_hub_callbacks callbacks;
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info accel[ACCEL_3D_CHANNEL_MAX];
- u32 accel_val[ACCEL_3D_CHANNEL_MAX];
+ /* Reserve for 3 channels + padding + timestamp */
+ u32 accel_val[ACCEL_3D_CHANNEL_MAX + 3];
int scale_pre_decml;
int scale_post_decml;
int scale_precision;
int value_offset;
+ int64_t timestamp;
};
static const u32 accel_3d_addresses[ACCEL_3D_CHANNEL_MAX] = {
@@ -87,7 +89,8 @@ static const struct iio_chan_spec accel_3d_channels[] = {
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
.scan_index = CHANNEL_SCAN_INDEX_Z,
- }
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(3)
};
/* Adjust channel real bits based on report descriptor */
@@ -192,11 +195,11 @@ static const struct iio_info accel_3d_info = {
};
/* Function to push data to buffer */
-static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
- int len)
+static void hid_sensor_push_data(struct iio_dev *indio_dev, void *data,
+ int len, int64_t timestamp)
{
dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
- iio_push_to_buffers(indio_dev, data);
+ iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp);
}
/* Callback handler to send event after all samples are received and captured */
@@ -208,10 +211,17 @@ static int accel_3d_proc_event(struct hid_sensor_hub_device *hsdev,
struct accel_3d_state *accel_state = iio_priv(indio_dev);
dev_dbg(&indio_dev->dev, "accel_3d_proc_event\n");
- if (atomic_read(&accel_state->common_attributes.data_ready))
+ if (atomic_read(&accel_state->common_attributes.data_ready)) {
+ if (!accel_state->timestamp)
+ accel_state->timestamp = iio_get_time_ns(indio_dev);
+
hid_sensor_push_data(indio_dev,
- accel_state->accel_val,
- sizeof(accel_state->accel_val));
+ accel_state->accel_val,
+ sizeof(accel_state->accel_val),
+ accel_state->timestamp);
+
+ accel_state->timestamp = 0;
+ }
return 0;
}
@@ -236,6 +246,9 @@ static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
*(u32 *)raw_data;
ret = 0;
break;
+ case HID_USAGE_SENSOR_TIME_TIMESTAMP:
+ accel_state->timestamp = *(int64_t *)raw_data;
+ break;
default:
break;
}
diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
index f2ee90a..9a3a9db 100644
--- a/include/linux/hid-sensor-ids.h
+++ b/include/linux/hid-sensor-ids.h
@@ -95,6 +95,7 @@
#define HID_USAGE_SENSOR_TIME_HOUR 0x200525
#define HID_USAGE_SENSOR_TIME_MINUTE 0x200526
#define HID_USAGE_SENSOR_TIME_SECOND 0x200527
+#define HID_USAGE_SENSOR_TIME_TIMESTAMP 0x200529
/* Units */
#define HID_USAGE_SENSOR_UNITS_NOT_SPECIFIED 0x00
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] iio: accel: hid-sensor-accel-3d: Add timestamp
2016-11-18 18:33 [PATCH] iio: accel: hid-sensor-accel-3d: Add timestamp Srinivas Pandruvada
@ 2016-11-19 13:19 ` Jonathan Cameron
2016-11-21 18:21 ` Srinivas Pandruvada
0 siblings, 1 reply; 3+ messages in thread
From: Jonathan Cameron @ 2016-11-19 13:19 UTC (permalink / raw)
To: Srinivas Pandruvada; +Cc: linux-iio
On 18/11/16 18:33, Srinivas Pandruvada wrote:
> Added timestamp channel. With this change, each sample has a timestamp.
> This timestamp can be from the sensor hub when present or local kernel
> timestamp. HID sensors can send timestamp with input data using usage id
> HID_USAGE_SENSOR_TIME_TIMESTAMP.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
What are the units for the hardware provided timestamp? I couldn't immediately find
a sensible answer in the hid usage tables! It appeared to imply that the standard
option was the same as for _time64 which is in seconds (and so seems unlikely!)
Also, I'm not clear if they always align with acceleration scans?
So patch looks fine but more details needed.
J
> ---
> drivers/iio/accel/hid-sensor-accel-3d.c | 29 +++++++++++++++++++++--------
> include/linux/hid-sensor-ids.h | 1 +
> 2 files changed, 22 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
> index ab1e238..41215b6 100644
> --- a/drivers/iio/accel/hid-sensor-accel-3d.c
> +++ b/drivers/iio/accel/hid-sensor-accel-3d.c
> @@ -42,11 +42,13 @@ struct accel_3d_state {
> struct hid_sensor_hub_callbacks callbacks;
> struct hid_sensor_common common_attributes;
> struct hid_sensor_hub_attribute_info accel[ACCEL_3D_CHANNEL_MAX];
> - u32 accel_val[ACCEL_3D_CHANNEL_MAX];
> + /* Reserve for 3 channels + padding + timestamp */
> + u32 accel_val[ACCEL_3D_CHANNEL_MAX + 3];
> int scale_pre_decml;
> int scale_post_decml;
> int scale_precision;
> int value_offset;
> + int64_t timestamp;
> };
>
> static const u32 accel_3d_addresses[ACCEL_3D_CHANNEL_MAX] = {
> @@ -87,7 +89,8 @@ static const struct iio_chan_spec accel_3d_channels[] = {
> BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> BIT(IIO_CHAN_INFO_HYSTERESIS),
> .scan_index = CHANNEL_SCAN_INDEX_Z,
> - }
> + },
> + IIO_CHAN_SOFT_TIMESTAMP(3)
> };
>
> /* Adjust channel real bits based on report descriptor */
> @@ -192,11 +195,11 @@ static const struct iio_info accel_3d_info = {
> };
>
> /* Function to push data to buffer */
> -static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
> - int len)
> +static void hid_sensor_push_data(struct iio_dev *indio_dev, void *data,
> + int len, int64_t timestamp)
> {
> dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
> - iio_push_to_buffers(indio_dev, data);
> + iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp);
> }
>
> /* Callback handler to send event after all samples are received and captured */
> @@ -208,10 +211,17 @@ static int accel_3d_proc_event(struct hid_sensor_hub_device *hsdev,
> struct accel_3d_state *accel_state = iio_priv(indio_dev);
>
> dev_dbg(&indio_dev->dev, "accel_3d_proc_event\n");
> - if (atomic_read(&accel_state->common_attributes.data_ready))
> + if (atomic_read(&accel_state->common_attributes.data_ready)) {
> + if (!accel_state->timestamp)
> + accel_state->timestamp = iio_get_time_ns(indio_dev);
> +
> hid_sensor_push_data(indio_dev,
> - accel_state->accel_val,
> - sizeof(accel_state->accel_val));
> + accel_state->accel_val,
> + sizeof(accel_state->accel_val),
> + accel_state->timestamp);
> +
> + accel_state->timestamp = 0;
Are we always guaranteed to get one timestamp per 'scan'?
> + }
>
> return 0;
> }
> @@ -236,6 +246,9 @@ static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
> *(u32 *)raw_data;
> ret = 0;
> break;
> + case HID_USAGE_SENSOR_TIME_TIMESTAMP:
> + accel_state->timestamp = *(int64_t *)raw_data;
> + break;
> default:
> break;
> }
> diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
> index f2ee90a..9a3a9db 100644
> --- a/include/linux/hid-sensor-ids.h
> +++ b/include/linux/hid-sensor-ids.h
> @@ -95,6 +95,7 @@
> #define HID_USAGE_SENSOR_TIME_HOUR 0x200525
> #define HID_USAGE_SENSOR_TIME_MINUTE 0x200526
> #define HID_USAGE_SENSOR_TIME_SECOND 0x200527
> +#define HID_USAGE_SENSOR_TIME_TIMESTAMP 0x200529
>
> /* Units */
> #define HID_USAGE_SENSOR_UNITS_NOT_SPECIFIED 0x00
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] iio: accel: hid-sensor-accel-3d: Add timestamp
2016-11-19 13:19 ` Jonathan Cameron
@ 2016-11-21 18:21 ` Srinivas Pandruvada
0 siblings, 0 replies; 3+ messages in thread
From: Srinivas Pandruvada @ 2016-11-21 18:21 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sat, 2016-11-19 at 13:19 +0000, Jonathan Cameron wrote:
> On 18/11/16 18:33, Srinivas Pandruvada wrote:
> >
> > Added timestamp channel. With this change, each sample has a
> > timestamp.
> > This timestamp can be from the sensor hub when present or local
> > kernel
> > timestamp. HID sensors can send timestamp with input data using
> > usage id
> > HID_USAGE_SENSOR_TIME_TIMESTAMP.
> >
> > Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel
> > .com>
> What are the units for the hardware provided timestamp? I couldn't
> immediately find
> a sensible answer in the hid usage tables! It appeared to imply that
> the standard
> option was the same as for _time64 which is in seconds (and so seems
> unlikely!)
Good point. The unit is ns on my device. But I need to take care about
other combinations also. So I will resend this patch.
>
> Also, I'm not clear if they always align with acceleration scans?
Each input report (which has all X, Y, Z) has a timestamp. So this will
align.
>
> So patch looks fine but more details needed.
>
> J
> >
> > ---
> > drivers/iio/accel/hid-sensor-accel-3d.c | 29
> > +++++++++++++++++++++--------
> > include/linux/hid-sensor-ids.h | 1 +
> > 2 files changed, 22 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c
> > b/drivers/iio/accel/hid-sensor-accel-3d.c
> > index ab1e238..41215b6 100644
> > --- a/drivers/iio/accel/hid-sensor-accel-3d.c
> > +++ b/drivers/iio/accel/hid-sensor-accel-3d.c
> > @@ -42,11 +42,13 @@ struct accel_3d_state {
> > struct hid_sensor_hub_callbacks callbacks;
> > struct hid_sensor_common common_attributes;
> > struct hid_sensor_hub_attribute_info
> > accel[ACCEL_3D_CHANNEL_MAX];
> > - u32 accel_val[ACCEL_3D_CHANNEL_MAX];
> > + /* Reserve for 3 channels + padding + timestamp */
> > + u32 accel_val[ACCEL_3D_CHANNEL_MAX + 3];
> > int scale_pre_decml;
> > int scale_post_decml;
> > int scale_precision;
> > int value_offset;
> > + int64_t timestamp;
> > };
> >
> > static const u32 accel_3d_addresses[ACCEL_3D_CHANNEL_MAX] = {
> > @@ -87,7 +89,8 @@ static const struct iio_chan_spec
> > accel_3d_channels[] = {
> > BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > BIT(IIO_CHAN_INFO_HYSTERESIS),
> > .scan_index = CHANNEL_SCAN_INDEX_Z,
> > - }
> > + },
> > + IIO_CHAN_SOFT_TIMESTAMP(3)
> > };
> >
> > /* Adjust channel real bits based on report descriptor */
> > @@ -192,11 +195,11 @@ static const struct iio_info accel_3d_info =
> > {
> > };
> >
> > /* Function to push data to buffer */
> > -static void hid_sensor_push_data(struct iio_dev *indio_dev, const
> > void *data,
> > - int len)
> > +static void hid_sensor_push_data(struct iio_dev *indio_dev, void
> > *data,
> > + int len, int64_t timestamp)
> > {
> > dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
> > - iio_push_to_buffers(indio_dev, data);
> > + iio_push_to_buffers_with_timestamp(indio_dev, data,
> > timestamp);
> > }
> >
> > /* Callback handler to send event after all samples are received
> > and captured */
> > @@ -208,10 +211,17 @@ static int accel_3d_proc_event(struct
> > hid_sensor_hub_device *hsdev,
> > struct accel_3d_state *accel_state = iio_priv(indio_dev);
> >
> > dev_dbg(&indio_dev->dev, "accel_3d_proc_event\n");
> > - if (atomic_read(&accel_state-
> > >common_attributes.data_ready))
> > + if (atomic_read(&accel_state-
> > >common_attributes.data_ready)) {
> > + if (!accel_state->timestamp)
> > + accel_state->timestamp =
> > iio_get_time_ns(indio_dev);
> > +
> > hid_sensor_push_data(indio_dev,
> > - accel_state->accel_val,
> > - sizeof(accel_state->accel_val));
> > + accel_state->accel_val,
> > + sizeof(accel_state-
> > >accel_val),
> > + accel_state->timestamp);
> > +
> > + accel_state->timestamp = 0;
> Are we always guaranteed to get one timestamp per 'scan'?
Yes.
Thanks,
Srinivas
> >
> > + }
> >
> > return 0;
> > }
> > @@ -236,6 +246,9 @@ static int accel_3d_capture_sample(struct
> > hid_sensor_hub_device *hsdev,
> > *(u32 *)raw_data;
> > ret = 0;
> > break;
> > + case HID_USAGE_SENSOR_TIME_TIMESTAMP:
> > + accel_state->timestamp = *(int64_t *)raw_data;
> > + break;
> > default:
> > break;
> > }
> > diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-
> > sensor-ids.h
> > index f2ee90a..9a3a9db 100644
> > --- a/include/linux/hid-sensor-ids.h
> > +++ b/include/linux/hid-sensor-ids.h
> > @@ -95,6 +95,7 @@
> > #define HID_USAGE_SENSOR_TIME_HOUR
> > 0x200525
> > #define HID_USAGE_SENSOR_TIME_MINUTE
> > 0x200526
> > #define HID_USAGE_SENSOR_TIME_SECOND
> > 0x200527
> > +#define HID_USAGE_SENSOR_TIME_TIMESTAMP
> > 0x200529
> >
> > /* Units */
> > #define HID_USAGE_SENSOR_UNITS_NOT_SPECIFIED
> > 0x00
> >
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-11-21 18:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-18 18:33 [PATCH] iio: accel: hid-sensor-accel-3d: Add timestamp Srinivas Pandruvada
2016-11-19 13:19 ` Jonathan Cameron
2016-11-21 18:21 ` Srinivas Pandruvada
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).