From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from www381.your-server.de ([78.46.137.84]:57834 "EHLO www381.your-server.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932112AbdBKMen (ORCPT ); Sat, 11 Feb 2017 07:34:43 -0500 From: Lars-Peter Clausen To: Jonathan Cameron Cc: Hartmut Knaack , Peter Meerwald-Stadler , William Breathitt Gray , Matt Ranostay , linux-iio@vger.kernel.org, Lars-Peter Clausen Subject: [PATCH 8/8] iio: maxim_thermocouple: Set parent device Date: Sat, 11 Feb 2017 13:34:21 +0100 Message-Id: <1486816461-28618-9-git-send-email-lars@metafoo.de> In-Reply-To: <1486816461-28618-1-git-send-email-lars@metafoo.de> References: <1486816461-28618-1-git-send-email-lars@metafoo.de> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org Initialize the parent of the IIO device to the device that registered it. This makes sure that the IIO device appears the right level in the device hierarchy. Signed-off-by: Lars-Peter Clausen --- drivers/iio/temperature/maxim_thermocouple.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index f962f31..5572142 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -231,6 +231,7 @@ static int maxim_thermocouple_probe(struct spi_device *spi) indio_dev->available_scan_masks = chip->scan_masks; indio_dev->num_channels = chip->num_channels; indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->dev.parent = &spi->dev; data = iio_priv(indio_dev); data->spi = spi; -- 2.1.4