Re: [PATCH v2 2/6] dt-bindings: iio: chemical: add ENS160 sensor

["Rob Herring (Arm)" <robh@kernel.org>]

On Tue, 28 May 2024 21:14:19 -0300, Gustavo Silva wrote:
> Add bindings for ScioSense ENS160 multi-gas sensor.
> 
> Datasheet: https://www.sciosense.com/wp-content/uploads/2023/12/ENS160-Datasheet.pdf
> 
> Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
> ---
> changes in v2:
>  - Add devicetree binding file specifically for this sensor instead of
>    adding it to trivial-devices.yaml. This is needed in order to
>    document that this chip supports Vdd and Vddio supplies.
>  .../iio/chemical/sciosense,ens160.yaml        | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.example.dtb: gas-sensor@0: 'spi-max-frequency' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/chemical/sciosense,ens160.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240529001504.33648-2-gustavograzs@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.