Re: [PATCH v3 1/2] dt-bindings: iio: adc: add ti,ads1119

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 17 Jun 2024 20:32:14 +0200, Francesco Dolcini wrote:
> From: João Paulo Gonçalves <joao.goncalves@toradex.com>
> 
> Add devicetree bindings for Texas Instruments ADS1119 16-bit ADC
> with I2C interface.
> 
> Datasheet: https://www.ti.com/lit/gpn/ads1119
> Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> v3:
>  - add avdd and dvdd supplies
>  - add Reviewed-by: Conor Dooley <conor.dooley@microchip.com
> 
> v2:
>  - add diff-channels and single-channel
>  - add XOR check to make diff/single channel property required
>  - add interrupts, reset-gpios and vref-supply to the example
>  - fix missing additionalProperties/unevaluatedProperties warning in channels
>  - remove ti,gain and ti,datarate as they aren't fixed hw properties
>  - remove unnecessary |
> ---
>  .../bindings/iio/adc/ti,ads1119.yaml          | 155 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 162 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml: single-channel: missing type definition

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240617183215.4080-2-francesco@dolcini.it

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.