Re: [PATCH 3/4] dt-bindings: iio: dac: Add adi,ad3530r.yaml

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 19 Mar 2025 11:47:57 +0800, Kim Seer Paller wrote:
> The AD3530R/AD3530 is an 8-Channel, 16-Bit Voltage Output DAC, while the
> AD3531R/AD3531 is a 4-Channel, 16-Bit Voltage Output DAC. These devices
> include software-programmable gain controls that provide full-scale
> output spans of 2.5V or 5V for reference voltages of 2.5V. They operate
> from a single supply voltage range of 2.7V to 5.5V and are guaranteed to
> be monotonic by design. Additionally, these devices features a 2.5V,
> 5ppm/°C internal reference, which is disabled by default.
> 
> This adds the documentation for ad3530r.
> 
> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
> ---
>  .../devicetree/bindings/iio/dac/adi,ad3530r.yaml   | 89 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 90 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb: adc@0: pwm-names: ['convst1'] is too short
	from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#

doc reference errors (make refcheckdocs):
Warning: Documentation/arch/powerpc/cxl.rst references a file that doesn't exist: Documentation/ABI/testing/sysfs-class-cxl
Warning: lib/Kconfig.debug references a file that doesn't exist: Documentation/dev-tools/fault-injection/fault-injection.rst
Documentation/arch/powerpc/cxl.rst: Documentation/ABI/testing/sysfs-class-cxl
lib/Kconfig.debug: Documentation/dev-tools/fault-injection/fault-injection.rst

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250319-togreg-v1-3-d8244a502f2c@analog.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.