Re: iio on beagle bone black 3.13.6 kernel

gmane
2014-04-04T13:59:00Z

Hi,

On 2014-03-23 14:33, Jonathan Cameron wrote:
> On 23/03/14 18:54, Zubair Lutfullah : wrote:
>> On Sun, Mar 23, 2014 at 05:46:08PM +0000, Jonathan Cameron wrote:
>>> On 22/03/14 17:19, gmane@reliableembeddedsystems.com wrote:
>>>> Hi,
>>>>
>>>> I use a beagle bone black with a 3.13.6 kernel and would like to
>>>> get the
>>>> ./generic_buffer test which comes with the kernel to work.
>>>>
>>>> This is what I do:
>>>>
>>>> echo 1 > /sys/bus/iio/devices/iio_sysfs_trigger/add_trigger
>>>>
>>>> ls /sys/bus/iio/devices/
>>>> iio:device0 iio_sysfs_trigger trigger0
>>>>
>>>> cat /sys/bus/iio/devices/trigger0/name
>>>> sysfstrig1
>>>>
>>>> echo 1 >
>>>> /sys/bus/iio/devices/iio:device0/scan_elements/in_voltage5_en
>>>>
>>>>
>>>> ./generic_buffer.out -n TI-am335x-adc -t sysfstrig1 -l 128
>>>> iio device number being used is 0
>>>> iio trigger number being used is 0
>>>> sysfstrig1
>>>> ---> Could not open /trigger/current_trigger
>>>> Failed to write current_trigger file
>>>>
>>>> How can I get rid of this?
>>>>
>>>> Is this a problem with my driver, or should I just create this
>>>> magic
>>>> file somewhere?
>>> Does /sys/bus/iio/device/iio:device0/trigger/current_trigger exist?
>>> If so, try
>>> echo sysfstrig1 >
>>> /usys/bus/iio/device/iio:device0/trigger/current_trigger
>>> and see if that gives an error or not, then cat the same file to see
>>> if
>>> it 'took'.
>>>
>>> Otherwise, I'm not sure...
>>>
>>> Zubair, any thoughts?
>>>
>>
>> I thought we removed trigger from this driver for using continuous
>> sampling.
>> It was a hardware buffer driver with not proper support in
>> generic_buffer.c
> Good point. I have a mind like a sieve sometimes :)

This might explain my issues ;)

>>
>> For one-shot sampling you just cat
>> /sys/bus/iio/devices/iio:device0/channel etc.

As far as I remember this works.

>> For continuous sampling, modify generic_buffer.c to remove trigger
>> checks.

I will have a look at the code and will try to understand what you are
talking about ;)

>>
>> Could you please tell me where you got this driver? It shouldn't be
>> in any tree..
> From the email I suspect he's using your mainlined driver, but without
> the
> generic_buffer.c changes (as you never sent them out, *hint*)

I would assume this is mainline and also the generic_buffer.c is from
the same mainline kernel.

To be exact:

kernel:
3.13.6 stable

patches:
https://github.com/RobertBerger/meta-mainline/blob/dora-training-v3.13.x/beagle-bone-black-ml/recipes-kernel/linux/linux-yocto-custom/beagle-bone-black-ml-user-patches.scc

(which should not affect iio)

BTW:

This (your) reply email does not show up in Gmane[1] for some strange
reason, hence my late reply and the additional post [2] (where replies
seem to work)

[1] http://thread.gmane.org/gmane.linux.kernel.iio/11631
[2] http://thread.gmane.org/gmane.linux.kernel.iio/11673
>>
>> Regards
>> ZubairLK
>>

Regards,

Robert