[PATCH v4 3/5] staging:iio:hmc5843: register <-> value arrays now can have different lengths

[Josef Gajdusek <atx@atalax.net>]

Changed structure of struct hmc5843_chip_info to include length of translation
arrays. Code previously using #defined constant has been changed accordingly.
This allows to integrate devices which do have different amounts of available
rates/scales.

Signed-off-by: Josef Gajdusek <atx@atx.name>
---
 drivers/staging/iio/magnetometer/hmc5843_core.c | 34 +++++++++++++++++--------
 1 file changed, 23 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
index bdeaf43..08fb0be 100644
--- a/drivers/staging/iio/magnetometer/hmc5843_core.c
+++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
@@ -39,7 +39,6 @@
  */
 #define HMC5843_RANGE_GAIN_OFFSET		0x05
 #define HMC5843_RANGE_GAIN_DEFAULT		0x01
-#define HMC5843_RANGE_GAINS			8
 #define HMC5843_RANGE_GAIN_MASK		0xe0
 
 /* Device status */
@@ -59,7 +58,6 @@
  */
 #define HMC5843_RATE_OFFSET			0x02
 #define HMC5843_RATE_DEFAULT			0x04
-#define HMC5843_RATES				7
 #define HMC5843_RATE_MASK		0x1c
 
 /* Device measurement configuration */
@@ -69,15 +67,15 @@
 #define HMC5843_MEAS_CONF_MASK			0x03
 
 /* Scaling factors: 10000000/Gain */
-static const int hmc5843_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
+static const int hmc5843_regval_to_nanoscale[] = {
 	6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714
 };
 
-static const int hmc5883_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
+static const int hmc5883_regval_to_nanoscale[] = {
 	7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662
 };
 
-static const int hmc5883l_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
+static const int hmc5883l_regval_to_nanoscale[] = {
 	7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478
 };
 
@@ -94,11 +92,11 @@ static const int hmc5883l_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
  * 6		| 50			| 75
  * 7		| Not used		| Not used
  */
-static const int hmc5843_regval_to_samp_freq[7][2] = {
+static const int hmc5843_regval_to_samp_freq[][2] = {
 	{0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0}
 };
 
-static const int hmc5883_regval_to_samp_freq[7][2] = {
+static const int hmc5883_regval_to_samp_freq[][2] = {
 	{0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0},
 	{75, 0}
 };
@@ -107,7 +105,9 @@ static const int hmc5883_regval_to_samp_freq[7][2] = {
 struct hmc5843_chip_info {
 	const struct iio_chan_spec *channels;
 	const int (*regval_to_samp_freq)[2];
+	const int n_regval_to_samp_freq;
 	const int *regval_to_nanoscale;
+	const int n_regval_to_nanoscale;
 };
 
 /* The lower two bits contain the current conversion mode */
@@ -248,7 +248,7 @@ static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
 	size_t len = 0;
 	int i;
 
-	for (i = 0; i < HMC5843_RATES; i++)
+	for (i = 0; i < data->variant->n_regval_to_samp_freq; i++)
 		len += scnprintf(buf + len, PAGE_SIZE - len,
 			"%d.%d ", data->variant->regval_to_samp_freq[i][0],
 			data->variant->regval_to_samp_freq[i][1]);
@@ -278,7 +278,7 @@ static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
 {
 	int i;
 
-	for (i = 0; i < HMC5843_RATES; i++)
+	for (i = 0; i < data->variant->n_regval_to_samp_freq; i++)
 		if (val == data->variant->regval_to_samp_freq[i][0] &&
 			val2 == data->variant->regval_to_samp_freq[i][1])
 			return i;
@@ -307,7 +307,7 @@ static ssize_t hmc5843_show_scale_avail(struct device *dev,
 	size_t len = 0;
 	int i;
 
-	for (i = 0; i < HMC5843_RANGE_GAINS; i++)
+	for (i = 0; i < data->variant->n_regval_to_nanoscale; i++)
 		len += scnprintf(buf + len, PAGE_SIZE - len,
 			"0.%09d ", data->variant->regval_to_nanoscale[i]);
 
@@ -327,7 +327,7 @@ static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2)
 	if (val != 0)
 		return -EINVAL;
 
-	for (i = 0; i < HMC5843_RANGE_GAINS; i++)
+	for (i = 0; i < data->variant->n_regval_to_nanoscale; i++)
 		if (val2 == data->variant->regval_to_nanoscale[i])
 			return i;
 
@@ -480,17 +480,29 @@ static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
 	[HMC5843_ID] = {
 		.channels = hmc5843_channels,
 		.regval_to_samp_freq = hmc5843_regval_to_samp_freq,
+		.n_regval_to_samp_freq =
+				ARRAY_SIZE(hmc5843_regval_to_samp_freq),
 		.regval_to_nanoscale = hmc5843_regval_to_nanoscale,
+		.n_regval_to_nanoscale =
+				ARRAY_SIZE(hmc5843_regval_to_nanoscale),
 	},
 	[HMC5883_ID] = {
 		.channels = hmc5883_channels,
 		.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
+		.n_regval_to_samp_freq =
+				ARRAY_SIZE(hmc5883_regval_to_samp_freq),
 		.regval_to_nanoscale = hmc5883_regval_to_nanoscale,
+		.n_regval_to_nanoscale =
+				ARRAY_SIZE(hmc5883_regval_to_nanoscale),
 	},
 	[HMC5883L_ID] = {
 		.channels = hmc5883_channels,
 		.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
+		.n_regval_to_samp_freq =
+				ARRAY_SIZE(hmc5883_regval_to_samp_freq),
 		.regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
+		.n_regval_to_nanoscale =
+				ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
 	},
 };
 
-- 
1.8.5.5