From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ie0-f174.google.com ([209.85.223.174]:34961 "EHLO mail-ie0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752072AbbATLtj (ORCPT ); Tue, 20 Jan 2015 06:49:39 -0500 Received: by mail-ie0-f174.google.com with SMTP id at20so34381535iec.5 for ; Tue, 20 Jan 2015 03:49:39 -0800 (PST) Date: Tue, 20 Jan 2015 11:49:33 +0000 From: Lee Jones To: Todd E Brandt Cc: linux-pm@vger.kernel.org, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, jacob.jun.pan@linux.intel.com, sameo@linux.intel.com, sre@kernel.org, dbaryshkov@gmail.com, dwmw2@infradead.org, david.woodhouse@intel.com, todd.e.brandt@intel.com Subject: Re: [PATCH 2/3] mfd/axp20x: add support for fuel gauge cell driver Message-ID: <20150120114933.GJ13701@x1> References: <20150107212552.GC3440@linux.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 In-Reply-To: <20150107212552.GC3440@linux.intel.com> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org FYI: It's easier to track patch-sets when they are connected. Please send them as 'threaded'. Take a look at the man page for `git send-email` for more details. > mfd/axp20x: add support for fuel gauge cell > > Register definitions and platform data structure > for fuel gauge cell devices. > > Signed-off-by: Todd Brandt > ---- > include/linux/mfd/axp20x.h | 43 +++++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 41 insertions(+), 2 deletions(-) Applied, thanks. > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > index 81589d1..dfabd6d 100644 > --- a/include/linux/mfd/axp20x.h > +++ b/include/linux/mfd/axp20x.h > @@ -124,10 +124,27 @@ enum { > #define AXP288_PMIC_ADC_H 0x56 > #define AXP288_PMIC_ADC_L 0x57 > #define AXP288_ADC_TS_PIN_CTRL 0x84 > - > #define AXP288_PMIC_ADC_EN 0x84 > -#define AXP288_FG_TUNE5 0xed > > +/* Fuel Gauge */ > +#define AXP288_FG_RDC1_REG 0xba > +#define AXP288_FG_RDC0_REG 0xbb > +#define AXP288_FG_OCVH_REG 0xbc > +#define AXP288_FG_OCVL_REG 0xbd > +#define AXP288_FG_OCV_CURVE_REG 0xc0 > +#define AXP288_FG_DES_CAP1_REG 0xe0 > +#define AXP288_FG_DES_CAP0_REG 0xe1 > +#define AXP288_FG_CC_MTR1_REG 0xe2 > +#define AXP288_FG_CC_MTR0_REG 0xe3 > +#define AXP288_FG_OCV_CAP_REG 0xe4 > +#define AXP288_FG_CC_CAP_REG 0xe5 > +#define AXP288_FG_LOW_CAP_REG 0xe6 > +#define AXP288_FG_TUNE0 0xe8 > +#define AXP288_FG_TUNE1 0xe9 > +#define AXP288_FG_TUNE2 0xea > +#define AXP288_FG_TUNE3 0xeb > +#define AXP288_FG_TUNE4 0xec > +#define AXP288_FG_TUNE5 0xed > > /* Regulators IDs */ > enum { > @@ -236,4 +253,26 @@ struct axp20x_dev { > const struct regmap_irq_chip *regmap_irq_chip; > }; > > +#define BATTID_LEN 64 > +#define OCV_CURVE_SIZE 32 > +#define MAX_THERM_CURVE_SIZE 25 > +#define PD_DEF_MIN_TEMP 0 > +#define PD_DEF_MAX_TEMP 55 > + > +struct axp20x_fg_pdata { > + char battid[BATTID_LEN + 1]; > + int design_cap; > + int min_volt; > + int max_volt; > + int max_temp; > + int min_temp; > + int cap1; > + int cap0; > + int rdc1; > + int rdc0; > + int ocv_curve[OCV_CURVE_SIZE]; > + int tcsz; > + int thermistor_curve[MAX_THERM_CURVE_SIZE][2]; > +}; > + > #endif /* __LINUX_MFD_AXP20X_H */ -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog