[PATCH 2/9] iio: mma8452: Add access to registers via DebugFS

[Martin Fuzzey <mfuzzey@parkeon.com>]

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
---
 drivers/iio/accel/mma8452.c |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 04a4f34..c46df4e 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -34,6 +34,8 @@
 #define MMA8452_CTRL_REG2 0x2b
 #define MMA8452_CTRL_REG2_RST		BIT(6)
 
+#define MMA8452_MAX_REG 0x31
+
 #define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
 
 #define MMA8452_CTRL_DR_MASK (BIT(5) | BIT(4) | BIT(3))
@@ -292,6 +294,28 @@ done:
 	return IRQ_HANDLED;
 }
 
+static int mma8452_reg_access_dbg(struct iio_dev *indio_dev,
+			      unsigned reg, unsigned writeval,
+			      unsigned *readval)
+{
+	int ret;
+	struct mma8452_data *data = iio_priv(indio_dev);
+
+	if (reg > MMA8452_MAX_REG)
+		return -EINVAL;
+
+	if (readval == NULL) {
+		ret = mma8452_change_config(data, reg, writeval);
+	} else {
+		ret = i2c_smbus_read_byte_data(data->client, reg);
+		if (ret < 0)
+			return ret;
+		*readval = ret;
+		ret = 0;
+	}
+	return ret;
+}
+
 #define MMA8452_CHANNEL(axis, idx) { \
 	.type = IIO_ACCEL, \
 	.modified = 1, \
@@ -331,6 +355,7 @@ static const struct iio_info mma8452_info = {
 	.attrs = &mma8452_group,
 	.read_raw = &mma8452_read_raw,
 	.write_raw = &mma8452_write_raw,
+	.debugfs_reg_access = &mma8452_reg_access_dbg,
 	.driver_module = THIS_MODULE,
 };