From: NeilBrown <neilb@suse.de>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
GTA04 owners <gta04-owner@goldelico.com>,
Doug Anderson <dianders@chromium.org>,
Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>,
Manuel Stahl <manuel.stahl@iis.fraunhofer.de>,
Christian Strobel <christian.strobel@iis.fraunhofer.de>,
Hartmut Knaack <knaack.h@gmx.de>
Subject: [PATCH v2] iio: gyro: itg3200: add suspend/resume support.
Date: Tue, 24 Feb 2015 13:24:41 +1100 [thread overview]
Message-ID: <20150224132441.2cb8ae6d@notabene.brown> (raw)
[-- Attachment #1: Type: text/plain, Size: 2264 bytes --]
Unless we put the device to sleep when not it use, it wastes
6mA.
If the device is asleep on probe, the 'id' register
sometimes mis-reads - so reset first. If the device responds
at all a command sent to the address, it is almost certainly
the correct device already.
Acked-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NeilBrown <neil@brown.name>
---
v1 of this was sent in November. I got some useful feedback, but then got distracted
by something. Sorry for the long gap.
NeilBrown
diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c
index 6a8020d48140..f0fd94055d88 100644
--- a/drivers/iio/gyro/itg3200_core.c
+++ b/drivers/iio/gyro/itg3200_core.c
@@ -223,6 +223,10 @@ static int itg3200_initial_setup(struct iio_dev *indio_dev)
int ret;
u8 val;
+ ret = itg3200_reset(indio_dev);
+ if (ret)
+ goto err_ret;
+
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val);
if (ret)
goto err_ret;
@@ -233,10 +237,6 @@ static int itg3200_initial_setup(struct iio_dev *indio_dev)
goto err_ret;
}
- ret = itg3200_reset(indio_dev);
- if (ret)
- goto err_ret;
-
ret = itg3200_enable_full_scale(indio_dev);
err_ret:
return ret;
@@ -351,6 +351,26 @@ static int itg3200_remove(struct i2c_client *client)
return 0;
}
+static int __maybe_unused itg3200_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct itg3200 *st = iio_priv(indio_dev);
+
+ dev_dbg(&st->i2c->dev, "suspend device");
+
+ return itg3200_write_reg_8(indio_dev, ITG3200_REG_POWER_MANAGEMENT,
+ ITG3200_SLEEP);
+}
+
+static int __maybe_unused itg3200_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+ return itg3200_initial_setup(indio_dev);
+}
+
+static SIMPLE_DEV_PM_OPS(itg3200_pm_ops, itg3200_suspend, itg3200_resume);
+
static const struct i2c_device_id itg3200_id[] = {
{ "itg3200", 0 },
{ }
@@ -361,6 +381,7 @@ static struct i2c_driver itg3200_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "itg3200",
+ .pm = &itg3200_pm_ops,
},
.id_table = itg3200_id,
.probe = itg3200_probe,
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 811 bytes --]
next reply other threads:[~2015-02-24 2:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-24 2:24 NeilBrown [this message]
2015-03-09 14:55 ` [PATCH v2] iio: gyro: itg3200: add suspend/resume support Jonathan Cameron
2015-04-19 10:56 ` Hartmut Knaack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150224132441.2cb8ae6d@notabene.brown \
--to=neilb@suse.de \
--cc=christian.strobel@iis.fraunhofer.de \
--cc=dianders@chromium.org \
--cc=gta04-owner@goldelico.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manuel.stahl@iis.fraunhofer.de \
--cc=thorsten.nowak@iis.fraunhofer.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).