Re: [PATCH v2 0/4] iio: bmc150 regmap and SPI

[Markus Pargmann <mpa@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 3466 bytes --]

Hi Irina,

On Wed, Sep 09, 2015 at 02:30:30PM +0000, Tirdea, Irina wrote:
> 
> 
> > -----Original Message-----
> > From: Markus Pargmann [mailto:mpa@pengutronix.de]
> > Sent: 20 August, 2015 15:50
> > To: Jonathan Cameron
> > Cc: Srinivas Pandruvada; Tirdea, Irina; Lars-Peter Clausen; linux-iio@vger.kernel.org; linux-kernel@vger.kernel.org;
> > kernel@pengutronix.de; Markus Pargmann
> > Subject: [PATCH v2 0/4] iio: bmc150 regmap and SPI
> > 
> > Hi,
> > 
> 
> Hi Markus,
> 
> I tested your patches with my BMA250E driver connected on the i2c bus .
> The code looks good and most of it works. There are a couple of issues I will mention
> below and in the individual patches.
> 
> The patches in this version no longer apply cleanly on the togreg branch of the iio tree.
> I did the rebase myself, but since there were many conflicts I will do another test
> when you send the new rebased v3.

Thank you for review and testing. I will integrate your comments and
send a rebased v3.

> 
> > this series converts the bmc150 driver to use regmap and adds an SPI interface.
> > 
> > In v1 this was part of the series "Regmap max_raw_io and bmc150 SPI support".
> > It now depends on "regmap: i2c block support".
> > 
> 
> I used the patches that were already merged in the regmap tree. This bmc150 series should
> probably wait until the regmap patches end up in Jonathan's tree, otherwise they will
> break the build.

It seems the necessary patches are already in v4.3-rc1:
	29332534e2b6 (regmap-i2c: Add smbus i2c block support)

Best Regards,

Markus

> 
> Thanks,
> Irina
> 
> > Changes in v2:
> > - Removed default values for regmap_config fields.
> > - Redesigned the fifo_transfer function to avoid running in errors first.
> > - Dropped irq checks patch as it is already mainline
> > - Core can now be built as module with autoselection of i2c and spi parts
> > 
> > As my hardware is missing an interrupt line from the SPI connected bmc150 I am
> > not able to test the iio buffer code path and the i2c code path. Tests would be
> > appreciated.
> > 
> > Best regards,
> > 
> > Markus
> > 
> > 
> > Markus Pargmann (4):
> >   iio: bmc150: Use i2c regmap
> >   iio: bcm150: Remove i2c_client from private data
> >   iio: bmc150: Split the driver into core and i2c
> >   iio: bmc150: Add SPI driver
> > 
> >  drivers/iio/accel/Kconfig                          |  14 +-
> >  drivers/iio/accel/Makefile                         |   4 +-
> >  .../accel/{bmc150-accel.c => bmc150-accel-core.c}  | 398 ++++++++-------------
> >  drivers/iio/accel/bmc150-accel-i2c.c               |  99 +++++
> >  drivers/iio/accel/bmc150-accel-spi.c               |  83 +++++
> >  drivers/iio/accel/bmc150-accel.h                   |  21 ++
> >  6 files changed, 367 insertions(+), 252 deletions(-)
> >  rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (81%)
> >  create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c
> >  create mode 100644 drivers/iio/accel/bmc150-accel-spi.c
> >  create mode 100644 drivers/iio/accel/bmc150-accel.h
> > 
> > --
> > 2.4.6
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]