From: Andreas Dannenberg <dannenberg@ti.com>
To: Peter Rosin <peda@lysator.liu.se>
Cc: <linux-iio@vger.kernel.org>, Peter Rosin <peda@axentia.se>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald <pmeerw@pmeerw.net>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] iio: mcp4xxx_dpot: Driver for Microchip digital potentiometers
Date: Tue, 22 Sep 2015 07:10:54 -0500 [thread overview]
Message-ID: <20150922121054.GA4491@borg> (raw)
In-Reply-To: <1442870306-26128-2-git-send-email-peda@lysator.liu.se>
On Mon, Sep 21, 2015 at 11:18:26PM +0200, Peter Rosin wrote:
> From: Peter Rosin <peda@axentia.se>
>
> Add support for Microchip digital potentiometers and rheostats
> MCP4531, MCP4532, MCP4551, MCP4552,
> MCP4631, MCP4632, MCP4651, MCP4652
>
> These are either single (45xx) or dual (46xx) wipers with either
> 129 (4x3x) or 257 (4x5x) steps, and configured either as
> potentiometers (4xx1) or rheostats (4xx2).
>
> Signed-off-by: Peter Rosin <peda@axentia.se>
> ---
> MAINTAINERS | 5 +
> drivers/iio/Kconfig | 1 +
> drivers/iio/Makefile | 1 +
> drivers/iio/pot/Kconfig | 20 ++++
> drivers/iio/pot/Makefile | 6 ++
> drivers/iio/pot/mcp4xxx_dpot.c | 218 ++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 251 insertions(+)
> create mode 100644 drivers/iio/pot/Kconfig
> create mode 100644 drivers/iio/pot/Makefile
> create mode 100644 drivers/iio/pot/mcp4xxx_dpot.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b60e2b2369d2..2a34b75b3034 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6600,6 +6600,11 @@ W: http://linuxtv.org
> S: Maintained
> F: drivers/media/radio/radio-maxiradio*
>
> +MCP4XXX MICROCHIP DIGITAL POTENTIOMETER DRIVER
> +M: Peter Rosin <peda@axentia.se>
> +S: Maintained
> +F: drivers/iio/pot/mcp4xxx_dpot.*
> +
> MEDIA DRIVERS FOR RENESAS - VSP1
> M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> L: linux-media@vger.kernel.org
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index 4011effe4c05..837aabad4b9a 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -73,6 +73,7 @@ source "drivers/iio/orientation/Kconfig"
> if IIO_TRIGGER
> source "drivers/iio/trigger/Kconfig"
> endif #IIO_TRIGGER
> +source "drivers/iio/pot/Kconfig"
> source "drivers/iio/pressure/Kconfig"
> source "drivers/iio/proximity/Kconfig"
> source "drivers/iio/temperature/Kconfig"
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index 698afc2d17ce..df026289309f 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -23,6 +23,7 @@ obj-y += imu/
> obj-y += light/
> obj-y += magnetometer/
> obj-y += orientation/
> +obj-y += pot/
> obj-y += pressure/
> obj-y += proximity/
> obj-y += temperature/
> diff --git a/drivers/iio/pot/Kconfig b/drivers/iio/pot/Kconfig
> new file mode 100644
> index 000000000000..48ebc7ef6b6b
> --- /dev/null
> +++ b/drivers/iio/pot/Kconfig
> @@ -0,0 +1,20 @@
> +#
> +# Potentiometer drivers
> +#
> +# When adding new entries keep the list in alphabetical order
> +
> +menu "Digital potentiometers"
> +
> +config MCP4XXX_DPOT
> + tristate "Microchip MCP45xx/MCP46xx Digital Potentiometer driver"
> + depends on I2C
> + help
> + Say yes here to build support for the Microship
Microchip?
Regards,
--
Andreas Dannenberg
Texas Instruments Inc
next prev parent reply other threads:[~2015-09-22 12:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-21 21:18 Driver for Microchip digital potentiometers, v2 Peter Rosin
2015-09-21 21:18 ` [PATCH v2] iio: mcp4xxx_dpot: Driver for Microchip digital potentiometers Peter Rosin
2015-09-22 7:27 ` Crt Mori
2015-09-22 7:42 ` Daniel Baluta
2015-09-22 12:10 ` Andreas Dannenberg [this message]
2015-09-22 8:16 ` Driver for Microchip digital potentiometers, v2 Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150922121054.GA4491@borg \
--to=dannenberg@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=peda@lysator.liu.se \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).