From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Thu, 14 Apr 2016 12:35:40 -0500 From: Rob Herring To: Laxman Dewangan Cc: edubezval@gmail.com, rui.zhang@intel.com, mark.rutland@arm.com, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, jic23@kernel.org Subject: Re: [PATCH V3 1/2] thermal: generic-adc: Add DT binding for ADC based thermal sensor Message-ID: <20160414173540.GA23807@rob-hp-laptop> References: <1460644878-19943-1-git-send-email-ldewangan@nvidia.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1460644878-19943-1-git-send-email-ldewangan@nvidia.com> List-ID: On Thu, Apr 14, 2016 at 08:11:17PM +0530, Laxman Dewangan wrote: > Sometimes, thermal sensors like NCT thermistors are connected to > the ADC channel. The temperature is read by reading the voltage > across the sensor resistance via ADC and referring the lookup > table for ADC value to temperature. > > Add DT binding doc for the ADC based thermal sensor driver to > detail the DT property and provide the example for how to use it. > > Signed-off-by: Laxman Dewangan > > --- > Changes from V1: > - Make the lookup table to two dimensional instead of single array of linear > step of temperature. > - Remove detailing of IIO frameowrk and drivers. > - Added proper braces, indenting and labels. > > Changes from V2: > - Handle comment from Rob for detailing the first and second value of the array > and remove @ in the node name. > > .../bindings/thermal/thermal-generic-adc.txt | 89 ++++++++++++++++++++++ > 1 file changed, 89 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt Acked-by: Rob Herring