linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	Olof Johansson <olof@lixom.net>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Guenter Roeck <groeck@chromium.org>,
	Gwendal Grignou <gwendal@chromium.org>,
	Vincent Palatin <vpalatin@chromium.org>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>
Subject: Re: [PATCH v4 3/4] platform/chrome: Introduce a new function to check EC features.
Date: Tue, 9 Aug 2016 14:59:35 +0100	[thread overview]
Message-ID: <20160809135935.GL5243@dell> (raw)
In-Reply-To: <1470045278-18161-4-git-send-email-enric.balletbo@collabora.com>

On Mon, 01 Aug 2016, Enric Balletbo i Serra wrote:

> From: Vincent Palatin <vpalatin@chromium.org>
> 
> Use the EC_CMD_GET_FEATURES message to check the supported features for
> each MCU.
> 
> Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
> [tomeu: adapted to changes in mainline]
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
> [enric: remove references to USB PD feature and do it more generic]
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Reviewed-by: Guenter Roeck <groeck@chromium.org>
> ---
> 
> Changes since v3:
>  - Add Reviewed-by tag.
> 
>  drivers/platform/chrome/cros_ec_dev.c | 37 +++++++++++++++
>  include/linux/mfd/cros_ec.h           |  1 +
>  include/linux/mfd/cros_ec_commands.h  | 84 +++++++++++++++++++++++++++++++++++

For the MFD changes:
  Acked-by: Lee Jones <lee.jones@linaro.org>

>  3 files changed, 122 insertions(+)
> 
> diff --git a/drivers/platform/chrome/cros_ec_dev.c b/drivers/platform/chrome/cros_ec_dev.c
> index 8abd80d..7eb5307 100644
> --- a/drivers/platform/chrome/cros_ec_dev.c
> +++ b/drivers/platform/chrome/cros_ec_dev.c
> @@ -87,6 +87,41 @@ exit:
>  	return ret;
>  }
>  
> +static int cros_ec_check_features(struct cros_ec_dev *ec, int feature)
> +{
> +	struct cros_ec_command *msg;
> +	int ret;
> +
> +	if (ec->features[0] == -1U && ec->features[1] == -1U) {
> +		/* features bitmap not read yet */
> +
> +		msg = kmalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
> +		if (!msg)
> +			return -ENOMEM;
> +
> +		msg->version = 0;
> +		msg->command = EC_CMD_GET_FEATURES + ec->cmd_offset;
> +		msg->insize = sizeof(ec->features);
> +		msg->outsize = 0;
> +
> +		ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
> +		if (ret < 0 || msg->result != EC_RES_SUCCESS) {
> +			dev_warn(ec->dev, "cannot get EC features: %d/%d\n",
> +				 ret, msg->result);
> +			memset(ec->features, 0, sizeof(ec->features));
> +		}
> +
> +		memcpy(ec->features, msg->data, sizeof(ec->features));
> +
> +		dev_dbg(ec->dev, "EC features %08x %08x\n",
> +			ec->features[0], ec->features[1]);
> +
> +		kfree(msg);
> +	}
> +
> +	return ec->features[feature / 32] & EC_FEATURE_MASK_0(feature);
> +}
> +
>  /* Device file ops */
>  static int ec_device_open(struct inode *inode, struct file *filp)
>  {
> @@ -245,6 +280,8 @@ static int ec_device_probe(struct platform_device *pdev)
>  	ec->ec_dev = dev_get_drvdata(dev->parent);
>  	ec->dev = dev;
>  	ec->cmd_offset = ec_platform->cmd_offset;
> +	ec->features[0] = -1U; /* Not cached yet */
> +	ec->features[1] = -1U; /* Not cached yet */
>  	device_initialize(&ec->class_dev);
>  	cdev_init(&ec->cdev, &fops);
>  
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 7769ea6..7f039b2 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -187,6 +187,7 @@ struct cros_ec_dev {
>  	struct cros_ec_device *ec_dev;
>  	struct device *dev;
>  	u16 cmd_offset;
> +	u32 features[2];
>  };
>  
>  /**
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index 8826e0f..1683003 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -713,6 +713,90 @@ struct ec_response_get_set_value {
>  /* More than one command can use these structs to get/set paramters. */
>  #define EC_CMD_GSV_PAUSE_IN_S5	0x0c
>  
> +/*****************************************************************************/
> +/* List the features supported by the firmware */
> +#define EC_CMD_GET_FEATURES  0x0d
> +
> +/* Supported features */
> +enum ec_feature_code {
> +	/*
> +	 * This image contains a limited set of features. Another image
> +	 * in RW partition may support more features.
> +	 */
> +	EC_FEATURE_LIMITED = 0,
> +	/*
> +	 * Commands for probing/reading/writing/erasing the flash in the
> +	 * EC are present.
> +	 */
> +	EC_FEATURE_FLASH = 1,
> +	/*
> +	 * Can control the fan speed directly.
> +	 */
> +	EC_FEATURE_PWM_FAN = 2,
> +	/*
> +	 * Can control the intensity of the keyboard backlight.
> +	 */
> +	EC_FEATURE_PWM_KEYB = 3,
> +	/*
> +	 * Support Google lightbar, introduced on Pixel.
> +	 */
> +	EC_FEATURE_LIGHTBAR = 4,
> +	/* Control of LEDs  */
> +	EC_FEATURE_LED = 5,
> +	/* Exposes an interface to control gyro and sensors.
> +	 * The host goes through the EC to access these sensors.
> +	 * In addition, the EC may provide composite sensors, like lid angle.
> +	 */
> +	EC_FEATURE_MOTION_SENSE = 6,
> +	/* The keyboard is controlled by the EC */
> +	EC_FEATURE_KEYB = 7,
> +	/* The AP can use part of the EC flash as persistent storage. */
> +	EC_FEATURE_PSTORE = 8,
> +	/* The EC monitors BIOS port 80h, and can return POST codes. */
> +	EC_FEATURE_PORT80 = 9,
> +	/*
> +	 * Thermal management: include TMP specific commands.
> +	 * Higher level than direct fan control.
> +	 */
> +	EC_FEATURE_THERMAL = 10,
> +	/* Can switch the screen backlight on/off */
> +	EC_FEATURE_BKLIGHT_SWITCH = 11,
> +	/* Can switch the wifi module on/off */
> +	EC_FEATURE_WIFI_SWITCH = 12,
> +	/* Monitor host events, through for example SMI or SCI */
> +	EC_FEATURE_HOST_EVENTS = 13,
> +	/* The EC exposes GPIO commands to control/monitor connected devices. */
> +	EC_FEATURE_GPIO = 14,
> +	/* The EC can send i2c messages to downstream devices. */
> +	EC_FEATURE_I2C = 15,
> +	/* Command to control charger are included */
> +	EC_FEATURE_CHARGER = 16,
> +	/* Simple battery support. */
> +	EC_FEATURE_BATTERY = 17,
> +	/*
> +	 * Support Smart battery protocol
> +	 * (Common Smart Battery System Interface Specification)
> +	 */
> +	EC_FEATURE_SMART_BATTERY = 18,
> +	/* EC can dectect when the host hangs. */
> +	EC_FEATURE_HANG_DETECT = 19,
> +	/* Report power information, for pit only */
> +	EC_FEATURE_PMU = 20,
> +	/* Another Cros EC device is present downstream of this one */
> +	EC_FEATURE_SUB_MCU = 21,
> +	/* Support USB Power delivery (PD) commands */
> +	EC_FEATURE_USB_PD = 22,
> +	/* Control USB multiplexer, for audio through USB port for instance. */
> +	EC_FEATURE_USB_MUX = 23,
> +	/* Motion Sensor code has an internal software FIFO */
> +	EC_FEATURE_MOTION_SENSE_FIFO = 24,
> +};
> +
> +#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
> +#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32))
> +struct ec_response_get_features {
> +	uint32_t flags[2];
> +} __packed;
>  
>  /*****************************************************************************/
>  /* Flash commands */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2016-08-09 13:58 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-01  9:54 [PATCH v4 0/4] Add support for cros-ec-sensors Enric Balletbo i Serra
2016-08-01  9:54 ` [PATCH v4 1/4] iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub Enric Balletbo i Serra
2016-08-01 16:57   ` Guenter Roeck
2016-08-15 15:28   ` Jonathan Cameron
2016-09-03 17:07     ` Jonathan Cameron
2016-10-25 17:12       ` Jonathan Cameron
2016-08-01  9:54 ` [PATCH v4 2/4] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver Enric Balletbo i Serra
2016-08-15 15:28   ` Jonathan Cameron
2016-09-03 17:12     ` Jonathan Cameron
2016-10-25 17:12       ` Jonathan Cameron
2016-08-01  9:54 ` [PATCH v4 3/4] platform/chrome: Introduce a new function to check EC features Enric Balletbo i Serra
2016-08-09 13:59   ` Lee Jones [this message]
2016-10-25 17:14     ` Jonathan Cameron
2016-08-01  9:54 ` [PATCH v4 4/4] platform/chrome: cros_ec_dev - Register cros-ec sensors Enric Balletbo i Serra
2016-08-15 15:31   ` Jonathan Cameron
2016-09-03 17:20     ` Jonathan Cameron
2016-10-25 17:27       ` Jonathan Cameron
2016-08-15 15:24 ` [PATCH v4 0/4] Add support for cros-ec-sensors Jonathan Cameron
2016-08-16 12:49   ` Lee Jones
2016-08-21 19:57     ` Jonathan Cameron
2016-08-29 15:14       ` Jonathan Cameron
2016-08-30  8:57         ` Lee Jones
2016-08-31 20:06           ` Jonathan Cameron
2016-09-01  7:24             ` Lee Jones
2016-09-03 17:21               ` Jonathan Cameron
2016-10-18  8:35                 ` Enric Balletbo Serra
2016-10-18  8:56                   ` Jonathan Cameron
2016-10-22 17:48                     ` Olof Johansson
2016-10-22 17:49                     ` Olof Johansson
2016-10-22 18:47 ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160809135935.GL5243@dell \
    --to=lee.jones@linaro.org \
    --cc=enric.balletbo@collabora.com \
    --cc=groeck@chromium.org \
    --cc=gwendal@chromium.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=pmeerw@pmeerw.net \
    --cc=tomeu.vizoso@collabora.com \
    --cc=vpalatin@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).