* [PATCH] iio: accel: mma8452: claim direct mode during write raw
@ 2016-10-11 19:32 Alison Schofield
2016-10-15 14:55 ` Jonathan Cameron
0 siblings, 1 reply; 4+ messages in thread
From: Alison Schofield @ 2016-10-11 19:32 UTC (permalink / raw)
To: jic23; +Cc: knaack.h, lars, pmeerw, linux-iio, linux-kernel
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during all write raw operations.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
---
drivers/iio/accel/mma8452.c | 53 +++++++++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 21 deletions(-)
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 7951def..cbbc746 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -666,37 +666,43 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
struct mma8452_data *data = iio_priv(indio_dev);
int i, ret;
- if (iio_buffer_enabled(indio_dev))
- return -EBUSY;
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
i = mma8452_get_samp_freq_index(data, val, val2);
- if (i < 0)
- return i;
-
+ if (i < 0) {
+ ret = i;
+ goto release;
+ }
data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
- return mma8452_change_config(data, MMA8452_CTRL_REG1,
- data->ctrl_reg1);
+ ret = mma8452_change_config(data, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
case IIO_CHAN_INFO_SCALE:
i = mma8452_get_scale_index(data, val, val2);
- if (i < 0)
- return i;
+ if (i < 0) {
+ ret = i;
+ goto release;
+ }
data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
data->data_cfg |= i;
- return mma8452_change_config(data, MMA8452_DATA_CFG,
- data->data_cfg);
+ ret = mma8452_change_config(data, MMA8452_DATA_CFG,
+ data->data_cfg);
case IIO_CHAN_INFO_CALIBBIAS:
- if (val < -128 || val > 127)
- return -EINVAL;
+ if (val < -128 || val > 127) {
+ ret = -EINVAL;
+ goto release;
+ }
- return mma8452_change_config(data,
- MMA8452_OFF_X + chan->scan_index,
- val);
+ ret = mma8452_change_config(data,
+ MMA8452_OFF_X + chan->scan_index,
+ val);
case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
if (val == 0 && val2 == 0) {
@@ -705,23 +711,28 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
ret = mma8452_set_hp_filter_frequency(data, val, val2);
if (ret < 0)
- return ret;
+ goto release;
}
- return mma8452_change_config(data, MMA8452_DATA_CFG,
+ ret = mma8452_change_config(data, MMA8452_DATA_CFG,
data->data_cfg);
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
ret = mma8452_get_odr_index(data);
for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) {
- if (mma8452_os_ratio[i][ret] == val)
- return mma8452_set_power_mode(data, i);
+ if (mma8452_os_ratio[i][ret] == val) {
+ ret = mma8452_set_power_mode(data, i);
+ goto release;
+ }
}
default:
- return -EINVAL;
+ ret = -EINVAL;
}
+release:
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
}
static int mma8452_read_thresh(struct iio_dev *indio_dev,
--
2.1.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] iio: accel: mma8452: claim direct mode during write raw
2016-10-11 19:32 [PATCH] iio: accel: mma8452: claim direct mode during write raw Alison Schofield
@ 2016-10-15 14:55 ` Jonathan Cameron
2016-10-15 15:05 ` Jonathan Cameron
0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Cameron @ 2016-10-15 14:55 UTC (permalink / raw)
To: Alison Schofield; +Cc: knaack.h, lars, pmeerw, linux-iio, linux-kernel
On 11/10/16 20:32, Alison Schofield wrote:
> Driver was checking for direct mode but not locking it. Use
> claim/release helper functions to guarantee the device stays
> in direct mode during all write raw operations.
>
> Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Well you were consistent. Forgot breaks that needed adding everywhere ;)
I fixed up and applied to the togreg branch of iio.git - initially
pushed out as testing for the autobuilders to play with it.
Please sanity check I didn't mess it up!
Thanks,
Jonathan
> ---
> drivers/iio/accel/mma8452.c | 53 +++++++++++++++++++++++++++------------------
> 1 file changed, 32 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
> index 7951def..cbbc746 100644
> --- a/drivers/iio/accel/mma8452.c
> +++ b/drivers/iio/accel/mma8452.c
> @@ -666,37 +666,43 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
> struct mma8452_data *data = iio_priv(indio_dev);
> int i, ret;
>
> - if (iio_buffer_enabled(indio_dev))
> - return -EBUSY;
> + ret = iio_device_claim_direct_mode(indio_dev);
> + if (ret)
> + return ret;
>
> switch (mask) {
> case IIO_CHAN_INFO_SAMP_FREQ:
> i = mma8452_get_samp_freq_index(data, val, val2);
> - if (i < 0)
> - return i;
> -
> + if (i < 0) {
> + ret = i;
> + goto release;
> + }
> data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
> data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
>
> - return mma8452_change_config(data, MMA8452_CTRL_REG1,
> - data->ctrl_reg1);
> + ret = mma8452_change_config(data, MMA8452_CTRL_REG1,
> + data->ctrl_reg1);
break?
> case IIO_CHAN_INFO_SCALE:
> i = mma8452_get_scale_index(data, val, val2);
> - if (i < 0)
> - return i;
> + if (i < 0) {
> + ret = i;
> + goto release;
> + }
>
> data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
> data->data_cfg |= i;
>
> - return mma8452_change_config(data, MMA8452_DATA_CFG,
> - data->data_cfg);
> + ret = mma8452_change_config(data, MMA8452_DATA_CFG,
> + data->data_cfg);
break?
> case IIO_CHAN_INFO_CALIBBIAS:
> - if (val < -128 || val > 127)
> - return -EINVAL;
> + if (val < -128 || val > 127) {
> + ret = -EINVAL;
> + goto release;
> + }
>
> - return mma8452_change_config(data,
> - MMA8452_OFF_X + chan->scan_index,
> - val);
> + ret = mma8452_change_config(data,
> + MMA8452_OFF_X + chan->scan_index,
> + val);
break?
>
> case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
> if (val == 0 && val2 == 0) {
> @@ -705,23 +711,28 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
> data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
> ret = mma8452_set_hp_filter_frequency(data, val, val2);
> if (ret < 0)
> - return ret;
> + goto release;
> }
>
> - return mma8452_change_config(data, MMA8452_DATA_CFG,
> + ret = mma8452_change_config(data, MMA8452_DATA_CFG,
> data->data_cfg);
>
break?
> case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> ret = mma8452_get_odr_index(data);
>
> for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) {
> - if (mma8452_os_ratio[i][ret] == val)
> - return mma8452_set_power_mode(data, i);
> + if (mma8452_os_ratio[i][ret] == val) {
> + ret = mma8452_set_power_mode(data, i);
> + goto release;
> + }
> }
>
> default:
> - return -EINVAL;
> + ret = -EINVAL;
> }
> +release:
> + iio_device_release_direct_mode(indio_dev);
> + return ret;
> }
>
> static int mma8452_read_thresh(struct iio_dev *indio_dev,
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] iio: accel: mma8452: claim direct mode during write raw
2016-10-15 14:55 ` Jonathan Cameron
@ 2016-10-15 15:05 ` Jonathan Cameron
2016-10-15 17:00 ` Alison Schofield
0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Cameron @ 2016-10-15 15:05 UTC (permalink / raw)
To: Alison Schofield; +Cc: knaack.h, lars, pmeerw, linux-iio, linux-kernel
On 15/10/16 15:55, Jonathan Cameron wrote:
> On 11/10/16 20:32, Alison Schofield wrote:
>> Driver was checking for direct mode but not locking it. Use
>> claim/release helper functions to guarantee the device stays
>> in direct mode during all write raw operations.
>>
>> Signed-off-by: Alison Schofield <amsfield22@gmail.com>
> Well you were consistent. Forgot breaks that needed adding everywhere ;)
>
> I fixed up and applied to the togreg branch of iio.git - initially
> pushed out as testing for the autobuilders to play with it.
>
> Please sanity check I didn't mess it up!
Just noticed, that break would work better than goto here as well
so have made that change and pushed out.
Let me know if i messed it up.
Jonathan
>
> Thanks,
>
> Jonathan
>> ---
>> drivers/iio/accel/mma8452.c | 53 +++++++++++++++++++++++++++------------------
>> 1 file changed, 32 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
>> index 7951def..cbbc746 100644
>> --- a/drivers/iio/accel/mma8452.c
>> +++ b/drivers/iio/accel/mma8452.c
>> @@ -666,37 +666,43 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
>> struct mma8452_data *data = iio_priv(indio_dev);
>> int i, ret;
>>
>> - if (iio_buffer_enabled(indio_dev))
>> - return -EBUSY;
>> + ret = iio_device_claim_direct_mode(indio_dev);
>> + if (ret)
>> + return ret;
>>
>> switch (mask) {
>> case IIO_CHAN_INFO_SAMP_FREQ:
>> i = mma8452_get_samp_freq_index(data, val, val2);
>> - if (i < 0)
>> - return i;
>> -
>> + if (i < 0) {
>> + ret = i;
>> + goto release;
>> + }
>> data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
>> data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
>>
>> - return mma8452_change_config(data, MMA8452_CTRL_REG1,
>> - data->ctrl_reg1);
>> + ret = mma8452_change_config(data, MMA8452_CTRL_REG1,
>> + data->ctrl_reg1);
> break?
>> case IIO_CHAN_INFO_SCALE:
>> i = mma8452_get_scale_index(data, val, val2);
>> - if (i < 0)
>> - return i;
>> + if (i < 0) {
>> + ret = i;
>> + goto release;
>> + }
>>
>> data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
>> data->data_cfg |= i;
>>
>> - return mma8452_change_config(data, MMA8452_DATA_CFG,
>> - data->data_cfg);
>> + ret = mma8452_change_config(data, MMA8452_DATA_CFG,
>> + data->data_cfg);
> break?
>> case IIO_CHAN_INFO_CALIBBIAS:
>> - if (val < -128 || val > 127)
>> - return -EINVAL;
>> + if (val < -128 || val > 127) {
>> + ret = -EINVAL;
>> + goto release;
>> + }
>>
>> - return mma8452_change_config(data,
>> - MMA8452_OFF_X + chan->scan_index,
>> - val);
>> + ret = mma8452_change_config(data,
>> + MMA8452_OFF_X + chan->scan_index,
>> + val);
> break?
>>
>> case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
>> if (val == 0 && val2 == 0) {
>> @@ -705,23 +711,28 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
>> data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
>> ret = mma8452_set_hp_filter_frequency(data, val, val2);
>> if (ret < 0)
>> - return ret;
>> + goto release;
>> }
>>
>> - return mma8452_change_config(data, MMA8452_DATA_CFG,
>> + ret = mma8452_change_config(data, MMA8452_DATA_CFG,
>> data->data_cfg);
>>
> break?
>> case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
>> ret = mma8452_get_odr_index(data);
>>
>> for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) {
>> - if (mma8452_os_ratio[i][ret] == val)
>> - return mma8452_set_power_mode(data, i);
>> + if (mma8452_os_ratio[i][ret] == val) {
>> + ret = mma8452_set_power_mode(data, i);
>> + goto release;
>> + }
>> }
>>
>> default:
>> - return -EINVAL;
>> + ret = -EINVAL;
>> }
>> +release:
>> + iio_device_release_direct_mode(indio_dev);
>> + return ret;
>> }
>>
>> static int mma8452_read_thresh(struct iio_dev *indio_dev,
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] iio: accel: mma8452: claim direct mode during write raw
2016-10-15 15:05 ` Jonathan Cameron
@ 2016-10-15 17:00 ` Alison Schofield
0 siblings, 0 replies; 4+ messages in thread
From: Alison Schofield @ 2016-10-15 17:00 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: knaack.h, lars, pmeerw, linux-iio, linux-kernel
On Sat, Oct 15, 2016 at 04:05:24PM +0100, Jonathan Cameron wrote:
> On 15/10/16 15:55, Jonathan Cameron wrote:
> > On 11/10/16 20:32, Alison Schofield wrote:
> >> Driver was checking for direct mode but not locking it. Use
> >> claim/release helper functions to guarantee the device stays
> >> in direct mode during all write raw operations.
> >>
> >> Signed-off-by: Alison Schofield <amsfield22@gmail.com>
> > Well you were consistent. Forgot breaks that needed adding everywhere ;)
> >
> > I fixed up and applied to the togreg branch of iio.git - initially
> > pushed out as testing for the autobuilders to play with it.
> >
> > Please sanity check I didn't mess it up!
> Just noticed, that break would work better than goto here as well
> so have made that change and pushed out.
>
> Let me know if i messed it up.
Thanks Jonathan. I've looked at the ones you've repaired this
morning and see the errors in my usage of return/goto/break in
the case statements. Also sanity checked your fix-ups in
iio.git and they look right, of course :)
I'll fix up the ltr501 drivers and resend.
alisons
>
> Jonathan
> >
> > Thanks,
> >
> > Jonathan
> >> ---
> >> drivers/iio/accel/mma8452.c | 53 +++++++++++++++++++++++++++------------------
> >> 1 file changed, 32 insertions(+), 21 deletions(-)
> >>
> >> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
> >> index 7951def..cbbc746 100644
> >> --- a/drivers/iio/accel/mma8452.c
> >> +++ b/drivers/iio/accel/mma8452.c
> >> @@ -666,37 +666,43 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
> >> struct mma8452_data *data = iio_priv(indio_dev);
> >> int i, ret;
> >>
> >> - if (iio_buffer_enabled(indio_dev))
> >> - return -EBUSY;
> >> + ret = iio_device_claim_direct_mode(indio_dev);
> >> + if (ret)
> >> + return ret;
> >>
> >> switch (mask) {
> >> case IIO_CHAN_INFO_SAMP_FREQ:
> >> i = mma8452_get_samp_freq_index(data, val, val2);
> >> - if (i < 0)
> >> - return i;
> >> -
> >> + if (i < 0) {
> >> + ret = i;
> >> + goto release;
> >> + }
> >> data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
> >> data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
> >>
> >> - return mma8452_change_config(data, MMA8452_CTRL_REG1,
> >> - data->ctrl_reg1);
> >> + ret = mma8452_change_config(data, MMA8452_CTRL_REG1,
> >> + data->ctrl_reg1);
> > break?
> >> case IIO_CHAN_INFO_SCALE:
> >> i = mma8452_get_scale_index(data, val, val2);
> >> - if (i < 0)
> >> - return i;
> >> + if (i < 0) {
> >> + ret = i;
> >> + goto release;
> >> + }
> >>
> >> data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
> >> data->data_cfg |= i;
> >>
> >> - return mma8452_change_config(data, MMA8452_DATA_CFG,
> >> - data->data_cfg);
> >> + ret = mma8452_change_config(data, MMA8452_DATA_CFG,
> >> + data->data_cfg);
> > break?
> >> case IIO_CHAN_INFO_CALIBBIAS:
> >> - if (val < -128 || val > 127)
> >> - return -EINVAL;
> >> + if (val < -128 || val > 127) {
> >> + ret = -EINVAL;
> >> + goto release;
> >> + }
> >>
> >> - return mma8452_change_config(data,
> >> - MMA8452_OFF_X + chan->scan_index,
> >> - val);
> >> + ret = mma8452_change_config(data,
> >> + MMA8452_OFF_X + chan->scan_index,
> >> + val);
> > break?
> >>
> >> case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
> >> if (val == 0 && val2 == 0) {
> >> @@ -705,23 +711,28 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
> >> data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
> >> ret = mma8452_set_hp_filter_frequency(data, val, val2);
> >> if (ret < 0)
> >> - return ret;
> >> + goto release;
> >> }
> >>
> >> - return mma8452_change_config(data, MMA8452_DATA_CFG,
> >> + ret = mma8452_change_config(data, MMA8452_DATA_CFG,
> >> data->data_cfg);
> >>
> > break?
> >> case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> >> ret = mma8452_get_odr_index(data);
> >>
> >> for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) {
> >> - if (mma8452_os_ratio[i][ret] == val)
> >> - return mma8452_set_power_mode(data, i);
> >> + if (mma8452_os_ratio[i][ret] == val) {
> >> + ret = mma8452_set_power_mode(data, i);
> >> + goto release;
> >> + }
> >> }
> >>
> >> default:
> >> - return -EINVAL;
> >> + ret = -EINVAL;
> >> }
> >> +release:
> >> + iio_device_release_direct_mode(indio_dev);
> >> + return ret;
> >> }
> >>
> >> static int mma8452_read_thresh(struct iio_dev *indio_dev,
> >>
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-10-15 17:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-10-11 19:32 [PATCH] iio: accel: mma8452: claim direct mode during write raw Alison Schofield
2016-10-15 14:55 ` Jonathan Cameron
2016-10-15 15:05 ` Jonathan Cameron
2016-10-15 17:00 ` Alison Schofield
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).