From: Icenowy Zheng <icenowy@aosc.io>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>, Jonathan Cameron <jic23@kernel.org>,
Zhang Rui <rui.zhang@intel.com>,
Quentin Schulz <quentin.schulz@free-electrons.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
linux-pm@vger.kernel.org, Icenowy Zheng <icenowy@aosc.io>
Subject: [RFC PATCH 1/3] dt-bindings: update the Allwinner GPADC device tree binding for H3
Date: Wed, 29 Mar 2017 01:30:11 +0800 [thread overview]
Message-ID: <20170328173013.16539-2-icenowy@aosc.io> (raw)
In-Reply-To: <20170328173013.16539-1-icenowy@aosc.io>
Allwinner H3 features a thermal sensor like the one in A33, but has its
register re-arranged, the clock divider moved to CCU (originally the
clock divider is in ADC) and added a pair of bus clock and reset.
Update the binding document to cover H3.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
.../devicetree/bindings/mfd/sun4i-gpadc.txt | 23 ++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
index badff3611a98..7753133ca0ff 100644
--- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
+++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
@@ -4,12 +4,20 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
and sometimes as a touchscreen controller.
Required properties:
- - compatible: "allwinner,sun8i-a33-ths",
+ - compatible: must contain one of the following compatibles:
+ - "allwinner,sun8i-a33-ths"
+ - "allwinner,sun8i-h3-ths"
- reg: mmio address range of the chip,
- #thermal-sensor-cells: shall be 0,
- #io-channel-cells: shall be 0,
-Example:
+Required properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - clocks: the bus clock and the input clock of the ADC,
+ - clock-names: should be "bus" and "ths",
+ - resets: the bus reset of the ADC,
+
+Example for A33:
ths: ths@01c25000 {
compatible = "allwinner,sun8i-a33-ths";
reg = <0x01c25000 0x100>;
@@ -17,6 +25,17 @@ Example:
#io-channel-cells = <0>;
};
+Example for H3:
+ ths: ths@01c25000 {
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x100>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "ths";
+ resets = <&ccu RST_BUS_THS>;
+ #thermal-sensor-cells = <0>;
+ #io-channel-cells = <0>;
+ };
+
sun4i, sun5i and sun6i SoCs are also supported via the older binding:
sun4i resistive touchscreen controller
--
2.12.0
next prev parent reply other threads:[~2017-03-28 17:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-28 17:30 [RFC PATCH 0/3] IIO-based thermal sensor driver for Allwinner H3 SoC Icenowy Zheng
2017-03-28 17:30 ` Icenowy Zheng [this message]
2017-03-28 17:30 ` [RFC PATCH 2/3] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor Icenowy Zheng
2017-03-29 6:54 ` Quentin Schulz
2017-04-02 10:51 ` Jonathan Cameron
2017-03-28 17:30 ` [RFC PATCH 3/3] ARM: sun8i: h3: add support for the thermal sensor in H3 Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170328173013.16539-2-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=quentin.schulz@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox