linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	linux-iio@vger.kernel.org, David Lechner <david@lechnology.com>
Subject: Re: [PATCH v2 2/2] iio: adc: ti-ads7950: Add OF device ID table
Date: Wed, 9 Aug 2017 14:26:56 +0100	[thread overview]
Message-ID: <20170809142656.27f1a897@archlinux> (raw)
In-Reply-To: <1501602538.29303.333.camel@linux.intel.com>

On Tue, 01 Aug 2017 18:48:58 +0300
Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:

> On Sat, 2017-07-29 at 01:20 +0300, Andy Shevchenko wrote:
> > The driver doesn't have a struct of_device_id table but supported
> > devices
> > are registered via Device Trees. This is working on the assumption
> > that a
> > SPI device registered via OF will always match a legacy SPI device ID
> > and
> > that the MODALIAS reported will always be of the form spi:<device>.
> > 
> > There is an ACPI method to enumerate such devices via specific ACPI ID
> > and use of compatible strings. It will not work for the drivers which
> > have no OF match ID table present.
> > 
> > Besides this could change in the future so the correct approach is to
> > have an OF device ID table if the devices are registered via OF.
> >   
> 
> Btw, this patch can be applied independently.
> 
> For ACPI case both of them are needed, and order doesn't matter.
Good point.  Applied. 

Thanks,

Jonathan
> 
> > Tested-by: David Lechner <david@lechnology.com>
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> >  drivers/iio/adc/ti-ads7950.c | 18 ++++++++++++++++++
> >  1 file changed, 18 insertions(+)
> > 
> > diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-
> > ads7950.c
> > index ab669af291b7..a376190914ad 100644
> > --- a/drivers/iio/adc/ti-ads7950.c
> > +++ b/drivers/iio/adc/ti-ads7950.c
> > @@ -491,9 +491,27 @@ static const struct spi_device_id ti_ads7950_id[]
> > = {
> >  };
> >  MODULE_DEVICE_TABLE(spi, ti_ads7950_id);
> >  
> > +static const struct of_device_id ads7950_of_table[] = {
> > +	{ .compatible = "ti,ads7950", .data =
> > &ti_ads7950_chip_info[TI_ADS7950] },
> > +	{ .compatible = "ti,ads7951", .data =
> > &ti_ads7950_chip_info[TI_ADS7951] },
> > +	{ .compatible = "ti,ads7952", .data =
> > &ti_ads7950_chip_info[TI_ADS7952] },
> > +	{ .compatible = "ti,ads7953", .data =
> > &ti_ads7950_chip_info[TI_ADS7953] },
> > +	{ .compatible = "ti,ads7954", .data =
> > &ti_ads7950_chip_info[TI_ADS7954] },
> > +	{ .compatible = "ti,ads7955", .data =
> > &ti_ads7950_chip_info[TI_ADS7955] },
> > +	{ .compatible = "ti,ads7956", .data =
> > &ti_ads7950_chip_info[TI_ADS7956] },
> > +	{ .compatible = "ti,ads7957", .data =
> > &ti_ads7950_chip_info[TI_ADS7957] },
> > +	{ .compatible = "ti,ads7958", .data =
> > &ti_ads7950_chip_info[TI_ADS7958] },
> > +	{ .compatible = "ti,ads7959", .data =
> > &ti_ads7950_chip_info[TI_ADS7959] },
> > +	{ .compatible = "ti,ads7960", .data =
> > &ti_ads7950_chip_info[TI_ADS7960] },
> > +	{ .compatible = "ti,ads7961", .data =
> > &ti_ads7950_chip_info[TI_ADS7961] },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(of, ads7950_of_table);
> > +
> >  static struct spi_driver ti_ads7950_driver = {
> >  	.driver = {
> >  		.name	= "ads7950",
> > +		.of_match_table = ads7950_of_table,
> >  	},
> >  	.probe		= ti_ads7950_probe,
> >  	.remove		= ti_ads7950_remove,  
> 


      reply	other threads:[~2017-08-09 13:27 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-28 22:20 [PATCH v2 0/2] iio: ti-ads7950: Make it working on ACPI platforms Andy Shevchenko
2017-07-28 22:20 ` [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use " Andy Shevchenko
2017-07-30  1:27   ` David Lechner
2017-07-30 13:31     ` Jonathan Cameron
2017-08-01 15:45       ` Andy Shevchenko
2017-08-01 16:21         ` David Lechner
2017-08-01 16:41           ` Andy Shevchenko
2017-08-01 17:09             ` David Lechner
2017-08-01 17:44               ` Andy Shevchenko
2017-08-01 17:15             ` David Lechner
2017-08-01 17:24               ` Andy Shevchenko
2017-08-09 13:24                 ` Jonathan Cameron
2017-08-13 14:25                   ` Andy Shevchenko
2017-08-20 10:48                     ` Jonathan Cameron
2017-07-28 22:20 ` [PATCH v2 2/2] iio: adc: ti-ads7950: Add OF device ID table Andy Shevchenko
2017-08-01 15:48   ` Andy Shevchenko
2017-08-09 13:26     ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170809142656.27f1a897@archlinux \
    --to=jic23@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=david@lechnology.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).