linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Thierry Escande <thierry.escande@collabora.com>
Cc: Benson Leung <bleung@chromium.org>,
	Lee Jones <lee.jones@linaro.org>, Joseph Lo <josephl@nvidia.com>,
	Gwendal Grignou <gwendal@chromium.org>,
	Douglas Anderson <dianders@chromium.org>,
	Daniel Hung-yu Wu <hywu@google.com>,
	Vincent Palatin <vpalatin@chromium.org>,
	Wei-Ning Huang <wnhuang@google.com>,
	linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Subject: Re: [PATCH v2 1/8] iio: cros_ec: Relax sampling frequency before suspending
Date: Sat, 12 Aug 2017 13:42:03 +0100	[thread overview]
Message-ID: <20170812134203.6fceef07@archlinux> (raw)
In-Reply-To: <1502461385-27564-2-git-send-email-thierry.escande@collabora.com>

On Fri, 11 Aug 2017 16:22:58 +0200
Thierry Escande <thierry.escande@collabora.com> wrote:

> From: Gwendal Grignou <gwendal@chromium.org>
> 
> If an application set a tight sampling frequency, given the interrupt
> use is a wakup source, suspend will not happen: the kernel will receive
> a wake up interrupt and will cancel the suspend process.
> 
> Given cros_ec sensors type is non wake up, this patch adds prepare and
> complete callbacks to set 1s sampling period just before suspend. This
> ensures the sensor hub will not be a source of interrupt during the
> suspend process.
> 
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Thanks,

Jonathan
> ---
>  .../iio/common/cros_ec_sensors/cros_ec_sensors.c   |  1 +
>  .../common/cros_ec_sensors/cros_ec_sensors_core.c  | 49 ++++++++++++++++++++++
>  .../common/cros_ec_sensors/cros_ec_sensors_core.h  |  2 +
>  drivers/iio/light/cros_ec_light_prox.c             |  1 +
>  4 files changed, 53 insertions(+)
> 
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> index 38e8783..116da2c 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> @@ -292,6 +292,7 @@ MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
>  static struct platform_driver cros_ec_sensors_platform_driver = {
>  	.driver = {
>  		.name	= "cros-ec-sensors",
> +		.pm	= &cros_ec_sensors_pm_ops,
>  	},
>  	.probe		= cros_ec_sensors_probe,
>  	.id_table	= cros_ec_sensors_ids,
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index 416cae5..a620eb5 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -446,5 +446,54 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
>  }
>  EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
>  
> +static int __maybe_unused cros_ec_sensors_prepare(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> +
> +	if (st->curr_sampl_freq == 0)
> +		return 0;
> +
> +	/*
> +	 * If the sensors are sampled at high frequency, we will not be able to
> +	 * sleep. Set sampling to a long period if necessary.
> +	 */
> +	if (st->curr_sampl_freq < CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY) {
> +		mutex_lock(&st->cmd_lock);
> +		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
> +		st->param.ec_rate.data = CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY;
> +		cros_ec_motion_send_host_cmd(st, 0);
> +		mutex_unlock(&st->cmd_lock);
> +	}
> +	return 0;
> +}
> +
> +static void __maybe_unused cros_ec_sensors_complete(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> +
> +	if (st->curr_sampl_freq == 0)
> +		return;
> +
> +	if (st->curr_sampl_freq < CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY) {
> +		mutex_lock(&st->cmd_lock);
> +		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
> +		st->param.ec_rate.data = st->curr_sampl_freq;
> +		cros_ec_motion_send_host_cmd(st, 0);
> +		mutex_unlock(&st->cmd_lock);
> +	}
> +}
> +
> +const struct dev_pm_ops cros_ec_sensors_pm_ops = {
> +#ifdef CONFIG_PM_SLEEP
> +	.prepare = cros_ec_sensors_prepare,
> +	.complete = cros_ec_sensors_complete
> +#endif
> +};
> +EXPORT_SYMBOL_GPL(cros_ec_sensors_pm_ops);
> +
>  MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
>  MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
> index 8bc2ca3..2edf68d 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
> @@ -169,6 +169,8 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
>  			       struct iio_chan_spec const *chan,
>  			       int val, int val2, long mask);
>  
> +extern const struct dev_pm_ops cros_ec_sensors_pm_ops;
> +
>  /* List of extended channel specification for all sensors */
>  extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
>  
> diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
> index 7217223..f8658d4 100644
> --- a/drivers/iio/light/cros_ec_light_prox.c
> +++ b/drivers/iio/light/cros_ec_light_prox.c
> @@ -279,6 +279,7 @@ MODULE_DEVICE_TABLE(platform, cros_ec_light_prox_ids);
>  static struct platform_driver cros_ec_light_prox_platform_driver = {
>  	.driver = {
>  		.name	= "cros-ec-light-prox",
> +		.pm	= &cros_ec_sensors_pm_ops,
>  	},
>  	.probe		= cros_ec_light_prox_probe,
>  	.id_table	= cros_ec_light_prox_ids,


  reply	other threads:[~2017-08-12 12:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-11 14:22 [PATCH v2 0/8] platform/chrome: cros_ec: Fixes and improvements Thierry Escande
2017-08-11 14:22 ` [PATCH v2 1/8] iio: cros_ec: Relax sampling frequency before suspending Thierry Escande
2017-08-12 12:42   ` Jonathan Cameron [this message]
2017-08-11 14:22 ` [PATCH v2 2/8] mfd: cros_ec_i2c: move the system sleep pm ops to late Thierry Escande
2017-08-11 14:23 ` [PATCH v2 3/8] mfd: cros_ec: Stop the debugfs work when suspended Thierry Escande
2017-08-15  6:31   ` Benson Leung
2017-08-11 14:23 ` [PATCH v2 4/8] platform/chrome: cros_ec: register shutdown function for debugfs Thierry Escande
2017-08-15  6:35   ` Benson Leung
2017-08-11 14:23 ` [PATCH v2 5/8] mfd: cros_ec: fail early if we cannot identify the EC Thierry Escande
2017-08-11 14:23 ` [PATCH v2 6/8] mfd: cros_ec_i2c: add ACPI module device table Thierry Escande
2017-08-11 14:23 ` [PATCH v2 7/8] platform/chrome: cros_ec: Add sysfs entry to set keyboard wake lid angle Thierry Escande
2017-09-11 19:39   ` Benson Leung
2017-08-11 14:23 ` [PATCH v2 8/8] platform/chrome: cros_ec: sysfs: Modify error handling Thierry Escande
2017-09-11 19:42   ` Benson Leung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170812134203.6fceef07@archlinux \
    --to=jic23@kernel.org \
    --cc=bleung@chromium.org \
    --cc=dianders@chromium.org \
    --cc=gwendal@chromium.org \
    --cc=hywu@google.com \
    --cc=josephl@nvidia.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=thierry.escande@collabora.com \
    --cc=vpalatin@chromium.org \
    --cc=wnhuang@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).