Re: [PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9

[Jonathan Cameron <jic23@kernel.org>]

On Tue, 22 Aug 2017 00:03:29 +0200
Michał Mirosław <mirq-linux@rere.qmqm.pl> wrote:

> This series adds support for KXTF9 accelerometer. It is mostly compatible
> to KXCJK, but replaces motion direction interrupt with tap detection
> (not supported in this implementation, yet).
> 
> First 5 patches are refactorings with no outside-visible effects.
> Patch 6 fixes sysfs attribute name of sampling_frequency_avail
> to match sampling_frequency attribute it describes.
> Patch 7 finally adds support for KXTF9 accelerometers.

Cc'd Srinivas (original author of this driver - should really have been cc'd
from the start).

Michał: I'm assuming you don't have the parts already supported by the driver?

Srinivas: Are you likely to get time to take a quick look at this series any
time in the next few weeks?

Even better if you still have test hardware to check nothing broke on the
original supported parts (not to worry if not!)

We are past the point where these are going to make the coming merge window
anyway so have plenty of time.

Thanks,

Jonathan

p.s. If anyone else has the parts already supported by this driver and
can give the changes a quick check that would be great!
> 
> Michał Mirosław (7):
>   iio: accel: kxcjk1003: refactor ODR setting
>   iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names
>   iio: accel: kxcjk1013: extract report_motion_event() from interrupt
>     handler
>   iio: accel: kxcjk1013: rename motion direction bits
>   iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
>   iio: accel: kxcjk1013: make sampling_frequency_avail per-type
>   iio: accel: kxcjk1013: add support for KXTF9
> 
>  drivers/iio/accel/Kconfig      |   4 +-
>  drivers/iio/accel/kxcjk-1013.c | 366 ++++++++++++++++++++++++++---------------
>  2 files changed, 235 insertions(+), 135 deletions(-)
>