From: Jonathan Cameron <jic23@kernel.org>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
benjamin.gaignard@linaro.org, linux-kernel@vger.kernel.org,
linux-iio@vger.kernel.org
Subject: Re: [PATCH 3/3] iio: 104-quad-8: Add IIO generic counter interface support
Date: Sun, 3 Sep 2017 18:50:01 +0100 [thread overview]
Message-ID: <20170903185001.64df919e@archlinux> (raw)
In-Reply-To: <20170828162334.GA17815@sophia>
On Mon, 28 Aug 2017 12:23:45 -0400
William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
> On Sun, Aug 20, 2017 at 01:11:18PM +0100, Jonathan Cameron wrote:
> >On Mon, 31 Jul 2017 12:03:46 -0400
> >William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
> >
> >> This patch adds support for the IIO generic counter interface to the
> >> 104-QUAD-8 driver. The existing 104-QUAD-8 device interface should not
> >> be affected by this patch; all changes are intended as supplemental
> >> additions as perceived by the user.
> >>
> >> IIO Counter Signals are defined for all quadrature input pairs
> >> (A and B), as well as index input lines. However, IIO Counter Triggers
> >> are not created for the index input Signals. IIO Counter Values are
> >> created for the eight quadrature channel counts, and their respective
> >> Signals are associated via IIO Counter Triggers.
> >>
> >> The new generic counter interface sysfs attributes expose the same
> >> functionality and data available via the existing 104-QUAD-8 device
> >> interface. Four IIO Counter Value function modes are available,
> >> correlating to the four possible quadrature mode configurations:
> >> "non-quadrature," "quadrature x1," "quadrature x2," and "quadrature x4."
> >>
> >> A quad8_remove function is defined to call iio_counter_unregister. This
> >> function can be eliminated once a devm_iio_counter_register function is
> >> defined.
> >>
> >> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> >
> >A good example.
> >
> >I think it does make it clear that we need to be very careful on how much of
> >the interface is defined by freeform strings. Even if we export other means
> >of establishing the associations to userspace, the moment there are strings
> >available giving them names, software will start to use those.
> >
> >May be fine but we need to be very careful.
>
> I would like to limit the amount of strings as well; the availability of
> freeform strings has an unfortunate tendency to create situations where
> different drivers form separate conventions for duplicate functionality.
Absolutely.
>
> The reason freeform strings are available for the generic counter
> interface is to provide the flexibility to support more complex classes
> of counters. More specific counter class interfaces such as the future
> quadrature counter interface will likely expose predefined constants
> rather than allow drivers to create their own strings. In general
> though, I believe your warning is a good word of caution and I'll keep
> an eye on reducing the amount of freeform strings we allow.
OK. That could work fine - we enforce the usage by review rather than
code.
>
> In truth, while this is a good example of how a driver would utilize the
> generic counter interface with real hardware, it's not a perfect case
> for quadrature counters in general. As you noticed, the dynamic aspects
> of the generic counter interface are not needed by the 104-QUAD-8. The
> future quadrature counter interface would be more fitting for the
> 104-QUAD-8.
>
> In addition, I may provide a dummy software counter driver in version 2
> of this patchset to showcase and exemplify the functionality of the
> generic counter interface more directly and aptly.
That could be very useful. An alternative would be to look at a simple
device (if we can find one) and implement a userspace fake for it
(similar to what Guenter has done with lots of hwmon devices).
That way we can play with a real driver against fake hardware and get
the best of all possible worlds. I've been meaning to look at doing this
for various IIO drivers for a while (most complete for i2c devices I think).
As you might imagine I don't actually have that many parts (and most of them
aren't connected to boards at any given time) so any form of emulation can be
very helpful.
I'll see if I can dig up any interesting devices beyond the ones we
already know are integrated in various SoCs.
I think we really need say 2+ devices to justify decisions in the
core code. I did the original IIO version against 3ish devices but
that was more varied (and that wasn't nearly enough with hindsight!)
Jonathan
next prev parent reply other threads:[~2017-09-03 17:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-31 16:02 [PATCH 0/3] iio: Introduce the generic counter interface William Breathitt Gray
2017-07-31 16:03 ` [PATCH 1/3] iio: Implement counter channel specification and IIO_SIGNAL constant William Breathitt Gray
2017-07-31 16:03 ` [PATCH 2/3] iio: Introduce the generic counter interface William Breathitt Gray
2017-07-31 23:15 ` kbuild test robot
2017-08-20 11:40 ` Jonathan Cameron
2017-08-28 15:57 ` William Breathitt Gray
2017-09-03 17:37 ` Jonathan Cameron
2017-07-31 16:03 ` [PATCH 3/3] iio: 104-quad-8: Add IIO generic counter interface support William Breathitt Gray
2017-08-20 12:11 ` Jonathan Cameron
2017-08-28 16:23 ` William Breathitt Gray
2017-09-03 17:50 ` Jonathan Cameron [this message]
2017-09-03 18:24 ` Jonathan Cameron
2017-08-20 12:00 ` [PATCH 0/3] iio: Introduce the generic counter interface Jonathan Cameron
2017-08-28 14:16 ` William Breathitt Gray
2017-09-03 17:44 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170903185001.64df919e@archlinux \
--to=jic23@kernel.org \
--cc=benjamin.gaignard@linaro.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=vilhelm.gray@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).