From: Jonathan Cameron <jic23@kernel.org>
To: Brian Masney <masneyb@onstation.org>
Cc: linux-iio@vger.kernel.org, gregkh@linuxfoundation.org,
devel@driverdev.osuosl.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, linux-kernel@vger.kernel.org,
Jon.Brenner@ams.com
Subject: Re: [PATCH 07/13] staging: iio: tsl2x7x: remove unnecessary parentheses
Date: Sat, 21 Oct 2017 18:38:23 +0100 [thread overview]
Message-ID: <20171021183823.3fb96b21@archlinux> (raw)
In-Reply-To: <20171019200632.25820-8-masneyb@onstation.org>
On Thu, 19 Oct 2017 16:06:26 -0400
Brian Masney <masneyb@onstation.org> wrote:
> This patch fixes the error 'Unnecessary parentheses around 'XXX' from
> checkpatch.pl. It also fixes several other places with unnecessary
> parentheses that checkpatch.pl did not detect.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
Some of these are completely pointless, others can be argued either
way (from a readability point of view). I don't care much on those though so
Applied to the togreg branch of iio.git
Thanks,
Jonathan
> ---
> drivers/staging/iio/light/tsl2x7x.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
> index 80968dd456a0..6cc89cd6505e 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -348,9 +348,9 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
>
> /* clear any existing interrupt status */
> ret = i2c_smbus_write_byte(chip->client,
> - (TSL2X7X_CMD_REG |
> + TSL2X7X_CMD_REG |
> TSL2X7X_CMD_SPL_FN |
> - TSL2X7X_CMD_ALS_INT_CLR));
> + TSL2X7X_CMD_ALS_INT_CLR);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "i2c_write_command failed - err = %d\n", ret);
> @@ -364,7 +364,7 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
> chip->als_cur_info.als_ch0 = ch0;
> chip->als_cur_info.als_ch1 = ch1;
>
> - if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) {
> + if (ch0 >= chip->als_saturation || ch1 >= chip->als_saturation) {
> lux = TSL2X7X_LUX_CALC_OVER_FLOW;
> goto return_max;
> }
> @@ -697,14 +697,14 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
> dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n");
>
> reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL;
> - if ((chip->settings.interrupts_en == 0x20) ||
> - (chip->settings.interrupts_en == 0x30))
> + if (chip->settings.interrupts_en == 0x20 ||
> + chip->settings.interrupts_en == 0x30)
> reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL;
>
> reg_val |= chip->settings.interrupts_en;
> ret = i2c_smbus_write_byte_data(chip->client,
> - (TSL2X7X_CMD_REG |
> - TSL2X7X_CNTRL), reg_val);
> + TSL2X7X_CMD_REG | TSL2X7X_CNTRL,
> + reg_val);
> if (ret < 0)
> dev_err(&chip->client->dev,
> "%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
> @@ -1721,7 +1721,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
> return -EINVAL;
> }
>
> - ret = i2c_smbus_write_byte(clientp, (TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
> + ret = i2c_smbus_write_byte(clientp, TSL2X7X_CMD_REG | TSL2X7X_CNTRL);
> if (ret < 0) {
> dev_err(&clientp->dev, "write to cmd reg failed. err = %d\n",
> ret);
next prev parent reply other threads:[~2017-10-21 17:38 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 20:06 [PATCH 00/13] staging: iio: tsl2x7x: staging cleanups Brian Masney
2017-10-19 20:06 ` [PATCH 01/13] staging: iio: tsl2x7x: migrate *_thresh_period sysfs attributes to iio_event_spec Brian Masney
2017-10-21 17:31 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 02/13] staging: iio: tsl2x7x: remove unused tsl2x7x_parse_result structure Brian Masney
2017-10-21 17:32 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 03/13] staging: iio: tsl2x7x: sort #includes Brian Masney
2017-10-21 17:34 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 04/13] staging: iio: tsl2x7x: remove unnecessary struct iio_dev definition Brian Masney
2017-10-21 17:34 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 05/13] staging: iio: tsl2x7x: changed #defines to be aligned on the same column Brian Masney
2017-10-21 17:35 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 06/13] staging: iio: tsl2x7x: convert in_proximity0_calibscale_available to use IIO_CONST_ATTR Brian Masney
2017-10-21 17:36 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 07/13] staging: iio: tsl2x7x: remove unnecessary parentheses Brian Masney
2017-10-21 17:38 ` Jonathan Cameron [this message]
2017-10-19 20:06 ` [PATCH 08/13] staging: iio: tsl2x7x: correct alignment of parenthesis Brian Masney
2017-10-21 17:40 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 09/13] " Brian Masney
2017-10-21 17:41 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 10/13] staging: iio: tsl2x7x: rename power defines to improve code readability Brian Masney
2017-10-21 17:42 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 11/13] staging: iio: tsl2x7x: fix alignment of break statements Brian Masney
2017-10-21 17:44 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 12/13] staging: iio: tsl2x7x: put function definitions on a single line Brian Masney
2017-10-21 17:45 ` Jonathan Cameron
2017-10-19 20:06 ` [PATCH 13/13] staging: iio: tsl2x7x: add goto for TSL2X7X_LUX_CALC_OVER_FLOW Brian Masney
2017-10-21 17:46 ` Jonathan Cameron
2017-10-23 9:06 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171021183823.3fb96b21@archlinux \
--to=jic23@kernel.org \
--cc=Jon.Brenner@ams.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=masneyb@onstation.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).