linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: SF Markus Elfring <elfring@users.sourceforge.net>
Cc: linux-iio@vger.kernel.org,
	Alison Schofield <amsfield22@gmail.com>,
	"H. Nikolaus Schaller" <hns@goldelico.com>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	LKML <linux-kernel@vger.kernel.org>,
	kernel-janitors@vger.kernel.org
Subject: Re: [PATCH] iio/adc/palmas: Use common error handling code in palmas_gpadc_calibrate()
Date: Thu, 26 Oct 2017 17:33:14 +0100	[thread overview]
Message-ID: <20171026173314.0bd5fd27@archlinux> (raw)
In-Reply-To: <0ae3662d-6a74-622c-0423-e8552ea79bca@users.sourceforge.net>

On Thu, 26 Oct 2017 08:08:49 +0200
SF Markus Elfring <elfring@users.sourceforge.net> wrote:

> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Thu, 26 Oct 2017 07:58:03 +0200
> 
> * Add a jump target so that a specific error message is stored only once
>   at the end of this function implementation.
> 
> * Adjust condition checks.
> 
> This issue was detected by using the Coccinelle software.
> 
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>

Markus,

You need to a apply a check in these cases. If the code is harder
to read afterwards and hence more prone to bugs being introduced
now or in future, it is not a good change.

As such I won't be taking this sort of change.

Jonathan
> ---
>  drivers/iio/adc/palmas_gpadc.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
> index 69b9affeef1e..5e6566692d46 100644
> --- a/drivers/iio/adc/palmas_gpadc.c
> +++ b/drivers/iio/adc/palmas_gpadc.c
> @@ -304,17 +304,13 @@ static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan)
>  
>  	ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
>  				adc->adc_info[adc_chan].trim1_reg, &d1);
> -	if (ret < 0) {
> -		dev_err(adc->dev, "TRIM read failed: %d\n", ret);
> -		goto scrub;
> -	}
> +	if (ret)
> +		goto report_failure;
>  
>  	ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
>  				adc->adc_info[adc_chan].trim2_reg, &d2);
> -	if (ret < 0) {
> -		dev_err(adc->dev, "TRIM read failed: %d\n", ret);
> -		goto scrub;
> -	}
> +	if (ret)
> +		goto report_failure;
>  
>  	/* gain error calculation */
>  	k = (1000 + (1000 * (d2 - d1)) / (x2 - x1));
> @@ -329,6 +325,10 @@ static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan)
>  
>  scrub:
>  	return ret;
> +
> +report_failure:

This makes for complex code flow where it is not needed. As such I am
not going to even think about taking this sort of patch.

> +	dev_err(adc->dev, "TRIM read failed: %d\n", ret);
> +	goto scrub;
>  }
>  
>  static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan)


  reply	other threads:[~2017-10-26 16:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-26  6:08 [PATCH] iio/adc/palmas: Use common error handling code in palmas_gpadc_calibrate() SF Markus Elfring
2017-10-26 16:33 ` Jonathan Cameron [this message]
2017-10-27 13:43   ` SF Markus Elfring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171026173314.0bd5fd27@archlinux \
    --to=jic23@kernel.org \
    --cc=amsfield22@gmail.com \
    --cc=elfring@users.sourceforge.net \
    --cc=hns@goldelico.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).