Re: [PATCH v2 13/13] dt-bindings: iio: health: Add MAX30105 support to max30102.txt

[Jonathan Cameron <jic23@kernel.org>]

On Sun, 19 Nov 2017 12:35:04 -0800
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> On Fri, Oct 27, 2017 at 12:45 PM, Peter Meerwald-Stadler
> <pmeerw@pmeerw.net> wrote:
> > Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> > Cc: Matt Ranostay <matt.ranostay@konsulko.com>
> > Cc: Rob Herring <robh+dt@kernel.org>  
> 
> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan 
> > ---
> >  Documentation/devicetree/bindings/iio/health/max30102.txt | 8 ++++++--
> >  1 file changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
> > index 8629c18..ef2ca0a 100644
> > --- a/Documentation/devicetree/bindings/iio/health/max30102.txt
> > +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
> > @@ -1,9 +1,11 @@
> >  Maxim MAX30102 heart rate and pulse oximeter sensor
> > +Maxim MAX30105 optical particle-sensing module
> >
> >  * https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
> > +* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
> >
> >  Required properties:
> > -  - compatible: must be "maxim,max30102"
> > +  - compatible: must be "maxim,max30102" or "maxim,max30105"
> >    - reg: the I2C address of the sensor
> >    - interrupt-parent: should be the phandle for the interrupt controller
> >    - interrupts: the sole interrupt generated by the device
> > @@ -12,8 +14,10 @@ Required properties:
> >    interrupt client node bindings.
> >
> >  Optional properties:
> > -  - maxim,red-led-current-microamp: configuration for RED LED current
> > +  - maxim,red-led-current-microamp: configuration for red LED current
> >    - maxim,ir-led-current-microamp: configuration for IR LED current
> > +  - maxim,green-led-current-microamp: configuration for green LED current
> > +    (max30105 only)
> >
> >      Note that each step is approximately 200 microamps, ranging from 0 uA to
> >      50800 uA.
> > --
> > 2.7.4
> >  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html