From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-iio-owner@vger.kernel.org>
Received: from saturn.retrosnub.co.uk ([178.18.118.26]:51898 "EHLO
        saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1751674AbdKYQOp (ORCPT
        <rfc822;linux-iio@vger.kernel.org>); Sat, 25 Nov 2017 11:14:45 -0500
Date: Sat, 25 Nov 2017 16:14:42 +0000
From: Jonathan Cameron <jic23@jic23.retrosnub.co.uk>
To: Luke Ross <luke@lukeross.name>
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH] Linx 820 Windows tablet has a da280 mapped via ACPI
Message-ID: <20171125161442.0b290657@archlinux>
In-Reply-To: <1511472897.17498.11.camel@lukeross.name>
References: <1511472897.17498.11.camel@lukeross.name>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Sender: linux-iio-owner@vger.kernel.org
List-Id: linux-iio@vger.kernel.org

On Thu, 23 Nov 2017 21:34:57 +0000
Luke Ross <luke@lukeross.name> wrote:

> This adds an ACPI table to the driver and the ACPI ID of the sensor
> on the tablet.
> 
> Signed-off-by: Luke Ross <luke@lukeross.name>
Applied to the togreg branch of iio.git and pushed out as
testing for the autobuilders to play with it.


Thanks,

Jonathan

> ---
>  drivers/iio/accel/da280.c | 31 +++++++++++++++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/accel/da280.c b/drivers/iio/accel/da280.c
> index 6c214783241c..d4b555203427 100644
> --- a/drivers/iio/accel/da280.c
> +++ b/drivers/iio/accel/da280.c
> @@ -11,6 +11,7 @@
>  
>  #include <linux/module.h>
>  #include <linux/i2c.h>
> +#include <linux/acpi.h>
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
>  #include <linux/byteorder/generic.h>
> @@ -25,7 +26,7 @@
>  #define DA280_MODE_ENABLE		0x1e
>  #define DA280_MODE_DISABLE		0x9e
>  
> -enum { da226, da280 };
> +enum da280_chipset { da226, da280 };
>  
>  /*
>   * a value of + or -4096 corresponds to + or - 1G
> @@ -91,12 +92,24 @@ static const struct iio_info da280_info = {
>  	.read_raw	= da280_read_raw,
>  };
>  
> +static enum da280_chipset da280_match_acpi_device(struct device *dev)
> +{
> +	const struct acpi_device_id *id;
> +
> +	id = acpi_match_device(dev->driver->acpi_match_table, dev);
> +	if (!id)
> +		return -EINVAL;
> +
> +	return (enum da280_chipset) id->driver_data;
> +}
> +
>  static int da280_probe(struct i2c_client *client,
>  			const struct i2c_device_id *id)
>  {
>  	int ret;
>  	struct iio_dev *indio_dev;
>  	struct da280_data *data;
> +	enum da280_chipset chip;
>  
>  	ret = i2c_smbus_read_byte_data(client, DA280_REG_CHIP_ID);
>  	if (ret != DA280_CHIP_ID)
> @@ -114,7 +127,14 @@ static int da280_probe(struct i2c_client *client,
>  	indio_dev->info = &da280_info;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	indio_dev->channels = da280_channels;
> -	if (id->driver_data == da226) {
> +
> +	if (ACPI_HANDLE(&client->dev)) {
> +		chip = da280_match_acpi_device(&client->dev);
> +	} else {
> +		chip = id->driver_data;
> +	}
> +
> +	if (chip == da226) {
>  		indio_dev->name = "da226";
>  		indio_dev->num_channels = 2;
>  	} else {
> @@ -158,6 +178,12 @@ static int da280_resume(struct device *dev)
>  
>  static SIMPLE_DEV_PM_OPS(da280_pm_ops, da280_suspend, da280_resume);
>  
> +static const struct acpi_device_id da280_acpi_match[] = {
> +	{"MIRAACC", da280},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(acpi, da280_acpi_match);
> +
>  static const struct i2c_device_id da280_i2c_id[] = {
>  	{ "da226", da226 },
>  	{ "da280", da280 },
> @@ -168,6 +194,7 @@ MODULE_DEVICE_TABLE(i2c, da280_i2c_id);
>  static struct i2c_driver da280_driver = {
>  	.driver = {
>  		.name = "da280",
> +		.acpi_match_table = ACPI_PTR(da280_acpi_match),
>  		.pm = &da280_pm_ops,
>  	},
>  	.probe		= da280_probe,