From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH 1/2] iio: imu: st_lsm6dsx: pre-allocate read buffer at bootstrap
Date: Sun, 7 Jan 2018 16:20:03 +0000 [thread overview]
Message-ID: <20180107162003.1c3e1efd@archlinux> (raw)
In-Reply-To: <20180106222325.17442-2-lorenzo.bianconi@redhat.com>
On Sat, 6 Jan 2018 23:23:24 +0100
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> wrote:
> Allocate device read buffer at bootstrap and do not put it on the stack
> since it is pretty big (~200B) and its size will increase adding support
> to device hw timestamp.
> Moreover this patch fixes following sparse warnings:
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:250:17: warning: Variable length
> array is used.
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:283:55: error: cannot size
> expression
>
> Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver")
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 ++++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 7 +++----
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 ++++
> 3 files changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index ccbe44cef41a..35acb9c96745 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -27,6 +27,7 @@ enum st_lsm6dsx_hw_id {
> ST_LSM6DSX_MAX_ID,
> };
>
> +#define ST_LSM6DSX_BUFF_SIZE 256
> #define ST_LSM6DSX_CHAN_SIZE 2
> #define ST_LSM6DSX_SAMPLE_SIZE 6
> #define ST_LSM6DSX_MAX_WORD_LEN ((32 / ST_LSM6DSX_SAMPLE_SIZE) * \
> @@ -122,6 +123,7 @@ struct st_lsm6dsx_sensor {
> * @fifo_mode: FIFO operating mode supported by the device.
> * @enable_mask: Enabled sensor bitmask.
> * @sip: Total number of samples (acc/gyro) in a given pattern.
> + * @buff: Device read buffer.
> * @iio_devs: Pointers to acc/gyro iio_dev instances.
> * @settings: Pointer to the specific sensor settings in use.
> */
> @@ -137,6 +139,8 @@ struct st_lsm6dsx_hw {
> u8 enable_mask;
> u8 sip;
>
> + u8 *buff;
> +
> struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX];
>
> const struct st_lsm6dsx_settings *settings;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> index 093f9750974a..1d6aa9b1a4cf 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> @@ -247,7 +247,6 @@ static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
> struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor;
> s64 acc_ts, acc_delta_ts, gyro_ts, gyro_delta_ts;
> u8 iio_buff[ALIGN(ST_LSM6DSX_SAMPLE_SIZE, sizeof(s64)) + sizeof(s64)];
> - u8 buff[pattern_len];
> __le16 fifo_status;
>
> err = regmap_bulk_read(hw->regmap,
> @@ -280,7 +279,7 @@ static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
> samples);
>
> for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
> - err = st_lsm6dsx_read_block(hw, buff, sizeof(buff));
> + err = st_lsm6dsx_read_block(hw, hw->buff, pattern_len);
> if (err < 0)
> return err;
>
> @@ -305,7 +304,7 @@ static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
>
> while (acc_sip > 0 || gyro_sip > 0) {
> if (gyro_sip-- > 0) {
> - memcpy(iio_buff, &buff[offset],
> + memcpy(iio_buff, &hw->buff[offset],
> ST_LSM6DSX_SAMPLE_SIZE);
> iio_push_to_buffers_with_timestamp(
> hw->iio_devs[ST_LSM6DSX_ID_GYRO],
> @@ -315,7 +314,7 @@ static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
> }
>
> if (acc_sip-- > 0) {
> - memcpy(iio_buff, &buff[offset],
> + memcpy(iio_buff, &hw->buff[offset],
> ST_LSM6DSX_SAMPLE_SIZE);
> iio_push_to_buffers_with_timestamp(
> hw->iio_devs[ST_LSM6DSX_ID_ACC],
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 819a85bb86ec..c2fa3239b9c6 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -722,6 +722,10 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
> mutex_init(&hw->fifo_lock);
> mutex_init(&hw->conf_lock);
>
> + hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL);
> + if (!hw->buff)
> + return -ENOMEM;
> +
> hw->dev = dev;
> hw->irq = irq;
> hw->regmap = regmap;
prev parent reply other threads:[~2018-01-07 16:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-06 22:23 [PATCH 1/2] iio: imu: st_lsm6dsx: pre-allocate read buffer at bootstrap Lorenzo Bianconi
2018-01-07 16:20 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180107162003.1c3e1efd@archlinux \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).