From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.kernel.org ([198.145.29.99]:50446 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750818AbeBDKeo (ORCPT ); Sun, 4 Feb 2018 05:34:44 -0500 Date: Sun, 4 Feb 2018 10:34:39 +0000 From: Jonathan Cameron To: Phil Reid Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, robh+dt@kernel.org, mark.rutland@arm.com, Michael.Hennerich@analog.com, linux-iio@vger.kernel.org, devicetree@vger.kernel.org Subject: Re: [PATCH v4 1/2] dt-bindings: ad5272: Add bindings for Analog Devices digital potentiometers Message-ID: <20180204103439.5c49fa26@archlinux> In-Reply-To: <1517231574-92777-2-git-send-email-preid@electromag.com.au> References: <1517231574-92777-1-git-send-email-preid@electromag.com.au> <1517231574-92777-2-git-send-email-preid@electromag.com.au> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org On Mon, 29 Jan 2018 21:12:53 +0800 Phil Reid wrote: > Add binding documentation for Analog Devices AD5272 and AD5274 digital > potentiometer devices. > > Signed-off-by: Phil Reid This is simply enough that I doubt Rob or Mark is that bothered about reviewing it. Obviously any reviews are still welcome though as it will be in a rebaseable tree probably until after the merge window closes. Applied to the togreg branch of iio.git and pushed out as testing. Thanks, Jonathan > --- > .../bindings/iio/potentiometer/ad5272.txt | 27 ++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt > > diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt > new file mode 100644 > index 0000000..11e804c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt > @@ -0,0 +1,27 @@ > +* Analog Devices AD5272 digital potentiometer driver > + > +The node for this driver must be a child node of a I2C controller, hence > +all mandatory properties for your controller must be specified. See directory: > + > + Documentation/devicetree/bindings/i2c > + > +for more details. > + > +Required properties: > + - compatible: Must be one of the following, depending on the model: > + adi,ad5272-020 > + adi,ad5272-050 > + adi,ad5272-100 > + adi,ad5274-020 > + adi,ad5274-100 > + > +Optional properties: > + - reset-gpios: GPIO specification for the RESET input. This is an > + active low signal to the PCA953x. > + > +Example: > +ad5272: ad5272@2f { > + reg = <0x2F>; > + compatible = "adi,ad5272-020"; > + reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; > +};