From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: <jic23@kernel.org>, <knaack.h@gmx.de>, <lars@metafoo.de>,
<pmeerw@pmeerw.net>, <linux-iio@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>
Subject: [PATCH 2/5] regmap: Tidy up regmap_raw_read chunking code
Date: Thu, 15 Feb 2018 17:52:17 +0000 [thread overview]
Message-ID: <20180215175220.2691-2-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20180215175220.2691-1-ckeepax@opensource.cirrus.com>
Raw reads may need to be split into small chunks if max_raw_read is
set. Tidy up the code implementing this, the new code is slightly
clearer, slightly shorter and slightly more efficient.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
drivers/base/regmap/regmap.c | 44 +++++++++++++++++++-------------------------
1 file changed, 19 insertions(+), 25 deletions(-)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index f78ddaa9a1e8..93d4218c5569 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -2542,44 +2542,38 @@ int regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
if (regmap_volatile_range(map, reg, val_count) || map->cache_bypass ||
map->cache_type == REGCACHE_NONE) {
- int chunk_stride = map->reg_stride;
- size_t chunk_size = val_bytes;
- size_t chunk_count = val_count;
+ size_t chunk_count, chunk_bytes;
+ size_t chunk_regs = val_count;
if (!map->bus->read) {
ret = -ENOTSUPP;
goto out;
}
- if (!map->use_single_read) {
- if (map->max_raw_read)
- chunk_size = map->max_raw_read;
- else
- chunk_size = val_len;
- if (chunk_size % val_bytes)
- chunk_size -= chunk_size % val_bytes;
- chunk_count = val_len / chunk_size;
- chunk_stride *= chunk_size / val_bytes;
- }
+ if (map->use_single_read)
+ chunk_regs = 1;
+ else if (map->max_raw_read && val_len > map->max_raw_read)
+ chunk_regs = map->max_raw_read / val_bytes;
- /* Read bytes that fit into a multiple of chunk_size */
+ chunk_count = val_count / chunk_regs;
+ chunk_bytes = chunk_regs * val_bytes;
+
+ /* Read bytes that fit into whole chunks */
for (i = 0; i < chunk_count; i++) {
- ret = _regmap_raw_read(map,
- reg + (i * chunk_stride),
- val + (i * chunk_size),
- chunk_size);
+ ret = _regmap_raw_read(map, reg, val, chunk_bytes);
if (ret != 0)
- return ret;
+ goto out;
+
+ reg += regmap_get_offset(map, chunk_regs);
+ val += chunk_bytes;
+ val_len -= chunk_bytes;
}
/* Read remaining bytes */
- if (chunk_size * i < val_len) {
- ret = _regmap_raw_read(map,
- reg + (i * chunk_stride),
- val + (i * chunk_size),
- val_len - i * chunk_size);
+ if (val_len) {
+ ret = _regmap_raw_read(map, reg, val, val_len);
if (ret != 0)
- return ret;
+ goto out;
}
} else {
/* Otherwise go word by word for the cache; should be low
--
2.11.0
next prev parent reply other threads:[~2018-02-15 17:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-15 17:52 [PATCH 1/5] regmap: Move the handling for max_raw_read into regmap_raw_read Charles Keepax
2018-02-15 17:52 ` Charles Keepax [this message]
2018-02-16 12:05 ` Applied "regmap: Tidy up regmap_raw_read chunking code" to the regmap tree Mark Brown
2018-02-15 17:52 ` [PATCH 3/5] regmap: Use _regmap_read in regmap_bulk_read Charles Keepax
2018-02-16 12:05 ` Applied "regmap: Use _regmap_read in regmap_bulk_read" to the regmap tree Mark Brown
2018-02-15 17:52 ` [PATCH 4/5] iio: accel: bcm150: Remove handling for regmap raw_read_max Charles Keepax
2018-02-17 14:09 ` Jonathan Cameron
2018-02-19 11:42 ` Charles Keepax
2018-02-15 17:52 ` [PATCH 5/5] regmap: Remove regmap_get_raw_read_max Charles Keepax
2018-02-16 12:03 ` Mark Brown
2018-02-19 11:43 ` Charles Keepax
2018-02-16 12:05 ` Applied "regmap: Move the handling for max_raw_read into regmap_raw_read" to the regmap tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180215175220.2691-2-ckeepax@opensource.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=broonie@kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).