Hardware for testing resolver modules in staging

Hardware for testing resolver modules in staging

[Rodrigo Siqueira]

Hi,

I am working in the AD2S1210 with the intention to move it out of
staging. However, I don't have the device and Jonathan alerted me to the
lack of hardware for testing.

Michael, is it possible that someone in Analog Devices could help with
the hardware tests? If Analog Devices can't help, there is someone else
that could help with it?

P.s: Other guys are working in other modules in the resolver, I believe
they could be interesting on this issue too.

Best regards
Rodrigo Siqueira

Re: Hardware for testing resolver modules in staging

[Michael Hennerich]

On 14.03.2018 20:08, Rodrigo Siqueira wrote:
> Hi,
> 
> I am working in the AD2S1210 with the intention to move it out of
> staging. However, I don't have the device and Jonathan alerted me to the
> lack of hardware for testing.
> 
> Michael, is it possible that someone in Analog Devices could help with
> the hardware tests? If Analog Devices can't help, there is someone else
> that could help with it?
> 
> P.s: Other guys are working in other modules in the resolver, I believe
> they could be interesting on this issue too.
> 
> Best regards
> Rodrigo Siqueira
> 

Hi Rodrigo,

Unfortunately I don't have HW to test these drivers.
Besides the EVAL board and some connection to an single board computer,
you would also need an industrial resolver which are quite expensive.

If you or someone else want to test things. I can certainly have someone 
ship a free EVAL board if they are on stock, but the resolver would need 
to be sourced from somewhere else.

In general I think these drivers have been tested, if we are carefully 
we could skip the additional test.


-- 
Greetings,
Michael

--
Analog Devices GmbH      Otl-Aicher Strasse 60-64      80807 München
Sitz der Gesellschaft München, Registergericht München HRB 40368,
Geschäftsführer: Peter Kolberg, Ali Raza Husain, Eileen Wynne

Re: Hardware for testing resolver modules in staging

[Rodrigo Siqueira]

Hi,

On 03/15, Michael Hennerich wrote:
> On 14.03.2018 20:08, Rodrigo Siqueira wrote:
> > Hi,
> > 
> > I am working in the AD2S1210 with the intention to move it out of
> > staging. However, I don't have the device and Jonathan alerted me to the
> > lack of hardware for testing.
> > 
> > Michael, is it possible that someone in Analog Devices could help with
> > the hardware tests? If Analog Devices can't help, there is someone else
> > that could help with it?
> > 
> > P.s: Other guys are working in other modules in the resolver, I believe
> > they could be interesting on this issue too.
> > 
> > Best regards
> > Rodrigo Siqueira
> > 
> 
> Hi Rodrigo,
> 
> Unfortunately I don't have HW to test these drivers.
> Besides the EVAL board and some connection to an single board computer,
> you would also need an industrial resolver which are quite expensive.
> 
> If you or someone else want to test things. I can certainly have someone
> ship a free EVAL board if they are on stock, but the resolver would need to
> be sourced from somewhere else.

Nice.

> In general I think these drivers have been tested, if we are carefully we
> could skip the additional test.

Agree.
I will keep send patches to improve the AD2S1210 driver.

> -- 
> Greetings,
> Michael
> 
> --
> Analog Devices GmbH      Otl-Aicher Strasse 60-64      80807 München
> Sitz der Gesellschaft München, Registergericht München HRB 40368,
> Geschäftsführer: Peter Kolberg, Ali Raza Husain, Eileen Wynne

Re: Hardware for testing resolver modules in staging

[Jonathan Cameron]

On Thu, 15 Mar 2018 21:41:20 -0300
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> wrote:

> Hi,
> 
> On 03/15, Michael Hennerich wrote:
> > On 14.03.2018 20:08, Rodrigo Siqueira wrote:  
> > > Hi,
> > > 
> > > I am working in the AD2S1210 with the intention to move it out of
> > > staging. However, I don't have the device and Jonathan alerted me to the
> > > lack of hardware for testing.
> > > 
> > > Michael, is it possible that someone in Analog Devices could help with
> > > the hardware tests? If Analog Devices can't help, there is someone else
> > > that could help with it?
> > > 
> > > P.s: Other guys are working in other modules in the resolver, I believe
> > > they could be interesting on this issue too.
> > > 
> > > Best regards
> > > Rodrigo Siqueira
> > >   
> > 
> > Hi Rodrigo,
> > 
> > Unfortunately I don't have HW to test these drivers.
> > Besides the EVAL board and some connection to an single board computer,
> > you would also need an industrial resolver which are quite expensive.
> > 
> > If you or someone else want to test things. I can certainly have someone
> > ship a free EVAL board if they are on stock, but the resolver would need to
> > be sourced from somewhere else.  
> 
> Nice.
Old school resolvers do turn up on ebay from time to time. I have a bid
in on one in the uk at the moment with a view to 'eventually' getting
around to testing these drivers (and other future parts)

> 
> > In general I think these drivers have been tested, if we are carefully we
> > could skip the additional test.  
> 
> Agree.
> I will keep send patches to improve the AD2S1210 driver.
Seeing as the chances are Michael would get pestered by anyone who found
these drivers didn't work, I'm happy to go with this so we can make quicker
progress than we would sourcing parts and getting around to testing properly.

Jonathan
> 
> > -- 
> > Greetings,
> > Michael
> > 
> > --
> > Analog Devices GmbH      Otl-Aicher Strasse 60-64      80807 München
> > Sitz der Gesellschaft München, Registergericht München HRB 40368,
> > Geschäftsführer: Peter Kolberg, Ali Raza Husain, Eileen Wynne  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html