linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: John Syne <john3909@gmail.com>, Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org, Barry Song <21cnbao@gmail.com>,
	daniel.baluta@nxp.com
Subject: Re: [PATCH v3 6/8] staging:iio:ade7854: Rework I2C read function
Date: Sat, 24 Mar 2018 13:27:01 +0000	[thread overview]
Message-ID: <20180324132701.45dfdd33@archlinux> (raw)
In-Reply-To: <c7f86bb795b71e693692b228da854939be67cb1d.1521813782.git.rodrigosiqueiramelo@gmail.com>

On Fri, 23 Mar 2018 11:26:57 -0300
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> wrote:

> The read operation for the I2C function has many duplications that can
> be generalized into a single function. This patch reworks the read
> operation for I2C to centralizes all similar code in a single function.
> 
> It is possible to remove all the old interface to use the new one,
> however, for keeping the things simple and working this patch maintain
> legacy interface.
> 
> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Applied, thanks.

Jonathan

> ---
> Changes in v3:
>  - Remove the use of defines that not improve the readability
>  - Replace variable name "bytes" for "bits"
>  - Update commit message
> 
>  drivers/staging/iio/meter/ade7854-i2c.c | 106 +++++++++++---------------------
>  1 file changed, 37 insertions(+), 69 deletions(-)
> 
> diff --git a/drivers/staging/iio/meter/ade7854-i2c.c b/drivers/staging/iio/meter/ade7854-i2c.c
> index 29e959fdb932..63793f9664c7 100644
> --- a/drivers/staging/iio/meter/ade7854-i2c.c
> +++ b/drivers/staging/iio/meter/ade7854-i2c.c
> @@ -65,9 +65,10 @@ static int ade7854_i2c_write_reg(struct device *dev,
>  	return ret < 0 ? ret : 0;
>  }
>  
> -static int ade7854_i2c_read_reg_8(struct device *dev,
> -				  u16 reg_address,
> -				  u8 *val)
> +static int ade7854_i2c_read_reg(struct device *dev,
> +				u16 reg_address,
> +				u32 *val,
> +				int bits)
>  {
>  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>  	struct ade7854_state *st = iio_priv(indio_dev);
> @@ -79,95 +80,62 @@ static int ade7854_i2c_read_reg_8(struct device *dev,
>  
>  	ret = i2c_master_send(st->i2c, st->tx, 2);
>  	if (ret < 0)
> -		goto out;
> +		goto unlock;
>  
> -	ret = i2c_master_recv(st->i2c, st->rx, 1);
> +	ret = i2c_master_recv(st->i2c, st->rx, bits);
>  	if (ret < 0)
> -		goto out;
> +		goto unlock;
> +
> +	switch (bits) {
> +	case 8:
> +		*val = st->rx[0];
> +		break;
> +	case 16:
> +		*val = (st->rx[0] << 8) | st->rx[1];
> +		break;
> +	case 24:
> +		*val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2];
> +		break;
> +	case 32:
> +		*val = (st->rx[0] << 24) | (st->rx[1] << 16) |
> +			(st->rx[2] << 8) | st->rx[3];
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		goto unlock;
> +	}
>  
> -	*val = st->rx[0];
> -out:
> +unlock:
>  	mutex_unlock(&st->buf_lock);
>  	return ret;
>  }
>  
> +static int ade7854_i2c_read_reg_8(struct device *dev,
> +				  u16 reg_address,
> +				  u8 *val)
> +{
> +	return ade7854_i2c_read_reg(dev, reg_address, (u32 *)val, 8);
> +}
> +
>  static int ade7854_i2c_read_reg_16(struct device *dev,
>  				   u16 reg_address,
>  				   u16 *val)
>  {
> -	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> -	struct ade7854_state *st = iio_priv(indio_dev);
> -	int ret;
> -
> -	mutex_lock(&st->buf_lock);
> -	st->tx[0] = (reg_address >> 8) & 0xFF;
> -	st->tx[1] = reg_address & 0xFF;
> -
> -	ret = i2c_master_send(st->i2c, st->tx, 2);
> -	if (ret < 0)
> -		goto out;
> -
> -	ret = i2c_master_recv(st->i2c, st->rx, 2);
> -	if (ret < 0)
> -		goto out;
> -
> -	*val = (st->rx[0] << 8) | st->rx[1];
> -out:
> -	mutex_unlock(&st->buf_lock);
> -	return ret;
> +	return ade7854_i2c_read_reg(dev, reg_address, (u32 *)val, 16);
>  }
>  
>  static int ade7854_i2c_read_reg_24(struct device *dev,
>  				   u16 reg_address,
>  				   u32 *val)
>  {
> -	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> -	struct ade7854_state *st = iio_priv(indio_dev);
> -	int ret;
> -
> -	mutex_lock(&st->buf_lock);
> -	st->tx[0] = (reg_address >> 8) & 0xFF;
> -	st->tx[1] = reg_address & 0xFF;
> -
> -	ret = i2c_master_send(st->i2c, st->tx, 2);
> -	if (ret < 0)
> -		goto out;
> -
> -	ret = i2c_master_recv(st->i2c, st->rx, 3);
> -	if (ret < 0)
> -		goto out;
> -
> -	*val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2];
> -out:
> -	mutex_unlock(&st->buf_lock);
> -	return ret;
> +	return ade7854_i2c_read_reg(dev, reg_address, (u32 *)val, 24);
>  }
>  
>  static int ade7854_i2c_read_reg_32(struct device *dev,
>  				   u16 reg_address,
>  				   u32 *val)
>  {
> -	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> -	struct ade7854_state *st = iio_priv(indio_dev);
> -	int ret;
> -
> -	mutex_lock(&st->buf_lock);
> -	st->tx[0] = (reg_address >> 8) & 0xFF;
> -	st->tx[1] = reg_address & 0xFF;
> -
> -	ret = i2c_master_send(st->i2c, st->tx, 2);
> -	if (ret < 0)
> -		goto out;
> -
> -	ret = i2c_master_recv(st->i2c, st->rx, 4);
> -	if (ret < 0)
> -		goto out;
> -
> -	*val = (st->rx[0] << 24) | (st->rx[1] << 16) |
> -		(st->rx[2] << 8) | st->rx[3];
> -out:
> -	mutex_unlock(&st->buf_lock);
> -	return ret;
> +	return ade7854_i2c_read_reg(dev, reg_address, (u32 *)val, 32);
>  }
>  
>  static int ade7854_i2c_probe(struct i2c_client *client,


  reply	other threads:[~2018-03-24 13:27 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-23 14:21 [PATCH v3 0/8] Cleanup on I2C/SPI code Rodrigo Siqueira
2018-03-23 14:22 ` [PATCH v3 1/8] staging:iio:ade7854: Fix error handling on read/write John Syne
2018-03-24 12:41   ` Jonathan Cameron
2018-03-23 14:25 ` [PATCH v3 2/8] staging:iio:ade7854: Fix the wrong number of bits to read John Syne
2018-03-24 13:23   ` Jonathan Cameron
2018-03-23 14:26 ` [PATCH v3 3/8] staging:iio:ade7854: Rework I2C write function Rodrigo Siqueira
2018-03-24 13:24   ` Jonathan Cameron
2018-03-23 14:26 ` [PATCH v3 4/8] staging:iio:ade7854: Rework SPI " Rodrigo Siqueira
2018-03-24 13:25   ` Jonathan Cameron
2018-03-23 14:26 ` [PATCH v3 5/8] staging:iio:ade7854: Remove write_reg_* duplications Rodrigo Siqueira
2018-03-24 13:26   ` Jonathan Cameron
2018-03-23 14:26 ` [PATCH v3 6/8] staging:iio:ade7854: Rework I2C read function Rodrigo Siqueira
2018-03-24 13:27   ` Jonathan Cameron [this message]
2018-03-23 14:27 ` [PATCH v3 7/8] staging:iio:ade7854: Rework SPI " Rodrigo Siqueira
2018-03-24 13:28   ` Jonathan Cameron
2018-03-23 14:27 ` [PATCH v3 8/8] staging:iio:ade7854: Remove read_reg_* duplications Rodrigo Siqueira
2018-03-24 13:29   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180324132701.45dfdd33@archlinux \
    --to=jic23@kernel.org \
    --cc=21cnbao@gmail.com \
    --cc=daniel.baluta@nxp.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=john3909@gmail.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=rodrigosiqueiramelo@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).