From: Jonathan Cameron <jic23@kernel.org>
To: Brian Masney <masneyb@onstation.org>
Cc: linux-iio@vger.kernel.org, gregkh@linuxfoundation.org,
devel@driverdev.osuosl.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, linux-kernel@vger.kernel.org,
Jon.Brenner@ams.com
Subject: Re: [PATCH 10/13] staging: iio: tsl2x7x: rename prx to prox for consistency
Date: Sat, 21 Apr 2018 17:33:54 +0100 [thread overview]
Message-ID: <20180421173354.6a8ae0c1@archlinux> (raw)
In-Reply-To: <20180421004153.19073-11-masneyb@onstation.org>
On Fri, 20 Apr 2018 20:41:50 -0400
Brian Masney <masneyb@onstation.org> wrote:
> The driver mostly uses the 'prox' naming convention for most of the
> proximity settings, however prx_time and tsl2x7x_prx_gain was present.
> This patch renames these to prox_time and tsl2x7x_prox_gain for
> consistency with everything else in the driver.
>
> The kernel documentation for prx_gain is corrected to prox_gain so that
> it matches what is actually in the structure.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
Applied,
Thanks,
Jonathan
> ---
> drivers/staging/iio/light/tsl2x7x.c | 12 ++++++------
> drivers/staging/iio/light/tsl2x7x.h | 6 +++---
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
> index 87b99deef7a8..a7b4fcba7935 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -203,7 +203,7 @@ static const struct tsl2x7x_lux *tsl2x7x_default_lux_table_group[] = {
> static const struct tsl2x7x_settings tsl2x7x_default_settings = {
> .als_time = 219, /* 101 ms */
> .als_gain = 0,
> - .prx_time = 254, /* 5.4 ms */
> + .prox_time = 254, /* 5.4 ms */
> .prox_gain = 0,
> .wait_time = 245,
> .prox_config = 0,
> @@ -230,7 +230,7 @@ static const s16 tsl2x7x_als_gain[] = {
> 120
> };
>
> -static const s16 tsl2x7x_prx_gain[] = {
> +static const s16 tsl2x7x_prox_gain[] = {
> 1,
> 2,
> 4,
> @@ -594,7 +594,7 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
> u8 *dev_reg, reg_val;
>
> /* Non calculated parameters */
> - chip->tsl2x7x_config[TSL2X7X_PRX_TIME] = chip->settings.prx_time;
> + chip->tsl2x7x_config[TSL2X7X_PRX_TIME] = chip->settings.prox_time;
> chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] = chip->settings.wait_time;
> chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] = chip->settings.prox_config;
>
> @@ -1021,7 +1021,7 @@ static int tsl2x7x_write_event_value(struct iio_dev *indio_dev,
> if (chan->type == IIO_INTENSITY)
> time = chip->settings.als_time;
> else
> - time = chip->settings.prx_time;
> + time = chip->settings.prox_time;
>
> y = (TSL2X7X_MAX_TIMER_CNT - time) + 1;
> z = y * TSL2X7X_MIN_ITIME;
> @@ -1090,7 +1090,7 @@ static int tsl2x7x_read_event_value(struct iio_dev *indio_dev,
> time = chip->settings.als_time;
> mult = chip->settings.als_persistence;
> } else {
> - time = chip->settings.prx_time;
> + time = chip->settings.prox_time;
> mult = chip->settings.prox_persistence;
> }
>
> @@ -1153,7 +1153,7 @@ static int tsl2x7x_read_raw(struct iio_dev *indio_dev,
> if (chan->type == IIO_LIGHT)
> *val = tsl2x7x_als_gain[chip->settings.als_gain];
> else
> - *val = tsl2x7x_prx_gain[chip->settings.prox_gain];
> + *val = tsl2x7x_prox_gain[chip->settings.prox_gain];
> ret = IIO_VAL_INT;
> break;
> case IIO_CHAN_INFO_CALIBBIAS:
> diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h
> index 2c96f0b39b1e..408e5a89edb1 100644
> --- a/drivers/staging/iio/light/tsl2x7x.h
> +++ b/drivers/staging/iio/light/tsl2x7x.h
> @@ -44,9 +44,9 @@ struct tsl2x7x_lux {
> * aperture effects.
> * @wait_time: Time between PRX and ALS cycles
> * in 2.7 periods
> - * @prx_time: 5.2ms prox integration time -
> + * @prox_time: 5.2ms prox integration time -
> * decrease in 2.7ms periods
> - * @prx_gain: Proximity gain index
> + * @prox_gain: Proximity gain index
> * @prox_config: Prox configuration filters.
> * @als_cal_target: Known external ALS reading for
> * calibration.
> @@ -68,7 +68,7 @@ struct tsl2x7x_settings {
> int als_gain;
> int als_gain_trim;
> int wait_time;
> - int prx_time;
> + int prox_time;
> int prox_gain;
> int prox_config;
> int als_cal_target;
next prev parent reply other threads:[~2018-04-21 16:34 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-21 0:41 [PATCH 00/13] iio: tsl2x7x: staging cleanups Brian Masney
2018-04-21 0:41 ` [PATCH 01/13] staging: iio: tsl2x7x: move integration_time* attributes to IIO_INTENSITY channel Brian Masney
2018-04-21 16:13 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 02/13] staging: iio: tsl2x7x: use GPL-2.0+ SPDX license identifier Brian Masney
2018-04-21 16:16 ` Jonathan Cameron
2018-04-21 17:04 ` Brian Masney
2018-04-21 0:41 ` [PATCH 03/13] staging: iio: tsl2x7x: don't return error in IRQ handler Brian Masney
2018-04-21 16:18 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 04/13] staging: iio: tsl2x7x: simplify tsl2x7x_clear_interrupts function Brian Masney
2018-04-21 16:20 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 05/13] staging: iio: tsl2x7x: remove unnecessary chip status checks in suspend/resume Brian Masney
2018-04-21 16:23 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 06/13] staging: iio: tsl2x7x: simplify tsl2x7x_write_interrupt_config return Brian Masney
2018-04-21 16:25 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 07/13] staging: iio: tsl2x7x: simplify device id verification Brian Masney
2018-04-21 16:26 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 08/13] staging: iio: tsl2x7x: add range checking to three sysfs attributes Brian Masney
2018-04-21 16:31 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 09/13] staging: iio: tsl2x7x: move power and diode settings into header file Brian Masney
2018-04-21 16:33 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 10/13] staging: iio: tsl2x7x: rename prx to prox for consistency Brian Masney
2018-04-21 16:33 ` Jonathan Cameron [this message]
2018-04-21 0:41 ` [PATCH 11/13] staging: iio: tsl2x7x: use device defaults for als_time, prox_time and wait_time Brian Masney
2018-04-21 16:39 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 12/13] staging: iio: tsl2x7x: various comment cleanups Brian Masney
2018-04-21 16:37 ` Jonathan Cameron
2018-04-21 0:41 ` [PATCH 13/13] staging: iio: tsl2x7x: rename prox_config to als_prox_config Brian Masney
2018-04-21 16:38 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180421173354.6a8ae0c1@archlinux \
--to=jic23@kernel.org \
--cc=Jon.Brenner@ams.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=masneyb@onstation.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).