From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.kernel.org ([198.145.29.99]:34034 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731500AbeHAUJf (ORCPT ); Wed, 1 Aug 2018 16:09:35 -0400 Date: Wed, 1 Aug 2018 19:22:32 +0100 From: Jonathan Cameron To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org Subject: [PULL] 3rd set of new IIO device support, features, cleanups and fixes for the 4.19 cycle. Message-ID: <20180801192232.3eb71a44@archlinux> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org This is a somewhat sneaky late pull request given Linus has announced a likely 1 week delay. If it is too late I'll resend after the merge window. I merged in the fixes branch as those are primarily around things queued for the merge window. Particulary good to see the output of our Himanshu Jha, a GSOC student who developed the bme680 driver. New device support: * bme680 gas sensor (with temperature, humidity and pressure) - new driver to support this device * vcn4000 - support vcnl4200 (lots of rework to allow this) - ids added for VCNL4010 and VCNL4020 sensors New features: * ad9523 - support the various external signal options via gpios. Cleanups and fixes * ad_sigma_delta - unsigned long for a timeout. * ad9523 - fix a wrong return value that was indicating successful write failed and might lead to an infinite loop. * si1133 - fix an impossible test. - fix an uninitialsed variable by reading from the device in all paths. * xilinx xadc - check for return values in clk related functions - limit the pcap clock frequency to supported ranges. - stash the irq to avoid calling platform_get_irq from the remove path. - ensure the irq is actually requested before we enable the hardware to output it. ---------------------------------------------------------------- Colin Ian King (1): iio: light: si1133 fix test for val being not zero or not one. Himanshu Jha (1): iio: chemical: Add support for Bosch BME680 sensor Jonathan Cameron (1): Merge branch 'fixes-togreg' into togreg Lars-Peter Clausen (1): iio: ad9523: Fix return value for ad952x_store() Manish Narani (4): iio: adc: xilinx: Check for return values in clk related functions iio: adc: xilinx: limit pcap clock frequency value iio: adc: xilinx: Remove platform_get_irq from xadc_remove function iio: adc: xilinx: Move request_irq before enabling interrupts Maxime Roussin-B=C3=A9langer (1): iio: light: si1133: fix uninitialized resp variable Michael Hennerich (1): iio: ad9523: support for external signals via gpios Nicholas Mc Guire (1): iio: ad_sigma_delta: use unsigned long for timeout Tomas Novotny (4): iio: vcnl4000: make the driver extendable iio: vcnl4000: add VCNL4010 and VCNL4020 device id iio: vcnl4000: warn on incorrectly specified device id iio: vcnl4000: add support for VCNL4200 drivers/iio/adc/ad_sigma_delta.c | 5 +- drivers/iio/adc/xilinx-xadc-core.c | 40 +- drivers/iio/adc/xilinx-xadc.h | 1 + drivers/iio/chemical/Kconfig | 23 + drivers/iio/chemical/Makefile | 3 + drivers/iio/chemical/bme680.h | 96 ++++ drivers/iio/chemical/bme680_core.c | 959 +++++++++++++++++++++++++++++++++= ++++ drivers/iio/chemical/bme680_i2c.c | 85 ++++ drivers/iio/chemical/bme680_spi.c | 125 +++++ drivers/iio/frequency/ad9523.c | 32 +- drivers/iio/light/Kconfig | 5 +- drivers/iio/light/si1133.c | 5 +- drivers/iio/light/vcnl4000.c | 220 ++++++++- 13 files changed, 1558 insertions(+), 41 deletions(-) create mode 100644 drivers/iio/chemical/bme680.h create mode 100644 drivers/iio/chemical/bme680_core.c create mode 100644 drivers/iio/chemical/bme680_i2c.c create mode 100644 drivers/iio/chemical/bme680_spi.c