From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Philipp Rossak To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@bootlin.com, wens@csie.org, linux@armlinux.org.uk, jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, eugen.hristev@microchip.com, rdunlap@infradead.org, vilhelm.gray@gmail.com, clabbe.montjoie@gmail.com, quentin.schulz@bootlin.com, geert+renesas@glider.be, lukas@wunner.de, icenowy@aosc.io, arnd@arndb.de, broonie@kernel.org, arnaud.pouliquen@st.com Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH v3 26/30] ARM: dts: sun8i: h3: enable H3 sid controller Date: Thu, 30 Aug 2018 17:45:14 +0200 Message-Id: <20180830154518.29507-27-embed3d@gmail.com> In-Reply-To: <20180830154518.29507-1-embed3d@gmail.com> References: <20180830154518.29507-1-embed3d@gmail.com> List-ID: This patch enables the the sid controller in the H3. It can be used for thermal calibration data. Signed-off-by: Philipp Rossak --- arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 954848d5df50..1866aec69ec1 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -104,6 +104,13 @@ }; }; + soc { + sid: eeprom@1c14000 { + compatible = "allwinner,sun8i-h3-sid"; + reg = <0x01c14000 0x400>; + }; + }; + thermal-zones { cpu-thermal { /* milliseconds */ -- 2.11.0