From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>,
"lars@metafoo.de" <lars@metafoo.de>
Cc: "jic23@kernel.org" <jic23@kernel.org>,
"knaack.h@gmx.de" <knaack.h@gmx.de>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
"Hennerich, Michael" <Michael.Hennerich@analog.com>,
"pmeerw@pmeerw.net" <pmeerw@pmeerw.net>
Subject: Re: [PATCH 2/2] staging:iio:ad7606: Add support for the ad7605-4
Date: Mon, 17 Sep 2018 09:30:00 +0100 [thread overview]
Message-ID: <20180917093000.00004920@huawei.com> (raw)
In-Reply-To: <63a25b543a35e8f896e26796230ca7104a83b9cd.camel@analog.com>
On Mon, 17 Sep 2018 07:33:13 +0000
"Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote:
> On Sun, 2018-09-16 at 12:22 +0100, Jonathan Cameron wrote:
> > On Thu, 13 Sep 2018 14:02:12 +0300
> > Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> >
> > > Add support for the AD7605-4 to the AD7606 driver. The AD7605-4 is
> > > mostly
> > > interface compatible to the AD7606-6 with the only difference being not
> > > having support for oversampling.
> > >
> > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> >
> > I am guessing this might clash with the devm change from earlier in the
> > day so I'm not going to apply it (too much risk of a bug sneaking in).
> >
> > Please resend the remaining patches in for this driver as a series so
> > ordering is obvious etc.
>
> Hmm, the patch doesn't clash, but I will send them as a series.
I was being lazy and didn't actually check ;) Relied on false intuition.
Thanks,
Jonathan
>
> >
> > Otherwise this one looks good to me.
> >
> > Thanks,
> >
> > Jonathan
>
> Thanks
> Alex
>
> > > ---
> > > drivers/staging/iio/adc/Kconfig | 2 +-
> > > drivers/staging/iio/adc/ad7606.c | 33 +++++++++++++++++++++++-----
> > > drivers/staging/iio/adc/ad7606.h | 3 +++
> > > drivers/staging/iio/adc/ad7606_par.c | 3 +++
> > > drivers/staging/iio/adc/ad7606_spi.c | 1 +
> > > 5 files changed, 36 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/staging/iio/adc/Kconfig
> > > b/drivers/staging/iio/adc/Kconfig
> > > index e17efb03bac0..9d3062a07460 100644
> > > --- a/drivers/staging/iio/adc/Kconfig
> > > +++ b/drivers/staging/iio/adc/Kconfig
> > > @@ -11,7 +11,7 @@ config AD7606
> > > select IIO_TRIGGERED_BUFFER
> > > help
> > > Say yes here to build support for Analog Devices:
> > > - ad7606, ad7606-6, ad7606-4 analog to digital converters
> > > (ADC).
> > > + ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital
> > > converters (ADC).
> > >
> > > To compile this driver as a module, choose M here: the
> > > module will be called ad7606.
> > > diff --git a/drivers/staging/iio/adc/ad7606.c
> > > b/drivers/staging/iio/adc/ad7606.c
> > > index 793de92f27ed..06d65196bedb 100644
> > > --- a/drivers/staging/iio/adc/ad7606.c
> > > +++ b/drivers/staging/iio/adc/ad7606.c
> > > @@ -275,7 +275,7 @@ static const struct attribute_group
> > > ad7606_attribute_group_range = {
> > > .attrs = ad7606_attributes_range,
> > > };
> > >
> > > -#define AD7606_CHANNEL(num) \
> > > +#define AD760X_CHANNEL(num, mask) \
> > > { \
> > > .type = IIO_VOLTAGE, \
> > > .indexed = 1, \
> > > @@ -283,8 +283,7 @@ static const struct attribute_group
> > > ad7606_attribute_group_range = {
> > > .address = num,
> > > \
> > > .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> > > .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
> > > - .info_mask_shared_by_all = \
> > > - BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > > \
> > > + .info_mask_shared_by_all = mask, \
> > > .scan_index = num, \
> > > .scan_type = {
> > > \
> > > .sign = 's', \
> > > @@ -294,6 +293,20 @@ static const struct attribute_group
> > > ad7606_attribute_group_range = {
> > > }, \
> > > }
> > >
> > > +#define AD7605_CHANNEL(num) \
> > > + AD760X_CHANNEL(num, 0)
> > > +
> > > +#define AD7606_CHANNEL(num) \
> > > + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
> > > +
> > > +static const struct iio_chan_spec ad7605_channels[] = {
> > > + IIO_CHAN_SOFT_TIMESTAMP(4),
> > > + AD7605_CHANNEL(0),
> > > + AD7605_CHANNEL(1),
> > > + AD7605_CHANNEL(2),
> > > + AD7605_CHANNEL(3),
> > > +};
> > > +
> > > static const struct iio_chan_spec ad7606_channels[] = {
> > > IIO_CHAN_SOFT_TIMESTAMP(8),
> > > AD7606_CHANNEL(0),
> > > @@ -310,17 +323,24 @@ static const struct ad7606_chip_info
> > > ad7606_chip_info_tbl[] = {
> > > /*
> > > * More devices added in future
> > > */
> > > + [ID_AD7605_4] = {
> > > + .channels = ad7605_channels,
> > > + .num_channels = 5,
> > > + },
> > > [ID_AD7606_8] = {
> > > .channels = ad7606_channels,
> > > .num_channels = 9,
> > > + .has_oversampling = true,
> > > },
> > > [ID_AD7606_6] = {
> > > .channels = ad7606_channels,
> > > .num_channels = 7,
> > > + .has_oversampling = true,
> > > },
> > > [ID_AD7606_4] = {
> > > .channels = ad7606_channels,
> > > .num_channels = 5,
> > > + .has_oversampling = true,
> > > },
> > > };
> > >
> > > @@ -351,6 +371,9 @@ static int ad7606_request_gpios(struct ad7606_state
> > > *st)
> > > if (IS_ERR(st->gpio_frstdata))
> > > return PTR_ERR(st->gpio_frstdata);
> > >
> > > + if (!st->chip_info->has_oversampling)
> > > + return 0;
> > > +
> > > st->gpio_os = devm_gpiod_get_array_optional(dev,
> > > "oversampling-ratio",
> > > GPIOD_OUT_LOW);
> > > return PTR_ERR_OR_ZERO(st->gpio_os);
> > > @@ -429,12 +452,12 @@ int ad7606_probe(struct device *dev, int irq,
> > > void __iomem *base_address,
> > > return ret;
> > > }
> > >
> > > + st->chip_info = &ad7606_chip_info_tbl[id];
> > > +
> > > ret = ad7606_request_gpios(st);
> > > if (ret)
> > > goto error_disable_reg;
> > >
> > > - st->chip_info = &ad7606_chip_info_tbl[id];
> > > -
> > > indio_dev->dev.parent = dev;
> > > if (st->gpio_os) {
> > > if (st->gpio_range)
> > > diff --git a/drivers/staging/iio/adc/ad7606.h
> > > b/drivers/staging/iio/adc/ad7606.h
> > > index 57f11b46bc69..f422296354c9 100644
> > > --- a/drivers/staging/iio/adc/ad7606.h
> > > +++ b/drivers/staging/iio/adc/ad7606.h
> > > @@ -13,11 +13,13 @@
> > > * struct ad7606_chip_info - chip specific information
> > > * @channels: channel specification
> > > * @num_channels: number of channels
> > > + * @has_oversampling: whether the device has oversampling support
> > > */
> > >
> > > struct ad7606_chip_info {
> > > const struct iio_chan_spec *channels;
> > > unsigned int num_channels;
> > > + bool has_oversampling;
> > > };
> > >
> > > /**
> > > @@ -87,6 +89,7 @@ int ad7606_probe(struct device *dev, int irq, void
> > > __iomem *base_address,
> > > int ad7606_remove(struct device *dev, int irq);
> > >
> > > enum ad7606_supported_device_ids {
> > > + ID_AD7605_4,
> > > ID_AD7606_8,
> > > ID_AD7606_6,
> > > ID_AD7606_4
> > > diff --git a/drivers/staging/iio/adc/ad7606_par.c
> > > b/drivers/staging/iio/adc/ad7606_par.c
> > > index 956e38774767..8bd86e727b02 100644
> > > --- a/drivers/staging/iio/adc/ad7606_par.c
> > > +++ b/drivers/staging/iio/adc/ad7606_par.c
> > > @@ -79,6 +79,9 @@ static int ad7606_par_remove(struct platform_device
> > > *pdev)
> > >
> > > static const struct platform_device_id ad7606_driver_ids[] = {
> > > {
> > > + .name = "ad7605-4",
> > > + .driver_data = ID_AD7605_4,
> > > + }, {
> > > .name = "ad7606-8",
> > > .driver_data = ID_AD7606_8,
> > > }, {
> > > diff --git a/drivers/staging/iio/adc/ad7606_spi.c
> > > b/drivers/staging/iio/adc/ad7606_spi.c
> > > index ffd9d0626ec2..b76ca5a8c059 100644
> > > --- a/drivers/staging/iio/adc/ad7606_spi.c
> > > +++ b/drivers/staging/iio/adc/ad7606_spi.c
> > > @@ -55,6 +55,7 @@ static int ad7606_spi_remove(struct spi_device *spi)
> > > }
> > >
> > > static const struct spi_device_id ad7606_id[] = {
> > > + {"ad7605-4", ID_AD7605_4},
> > > {"ad7606-8", ID_AD7606_8},
> > > {"ad7606-6", ID_AD7606_6},
> > > {"ad7606-4", ID_AD7606_4},
> >
> >
next prev parent reply other threads:[~2018-09-17 13:56 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 11:02 [PATCH 1/2] staging:iio:ad7606: Remove incorrect kernel doc annotations Alexandru Ardelean
2018-09-13 11:02 ` [PATCH 2/2] staging:iio:ad7606: Add support for the ad7605-4 Alexandru Ardelean
2018-09-16 11:22 ` Jonathan Cameron
2018-09-17 7:33 ` Ardelean, Alexandru
2018-09-17 8:30 ` Jonathan Cameron [this message]
2018-09-17 9:01 ` Ardelean, Alexandru
2018-09-17 11:10 ` Jonathan Cameron
2018-09-22 15:35 ` Jonathan Cameron
2018-09-16 11:19 ` [PATCH 1/2] staging:iio:ad7606: Remove incorrect kernel doc annotations Jonathan Cameron
-- strict thread matches above, loose matches on Subject: below --
2018-09-10 16:16 [PATCH 1/2] staging:iio:ad7606: Remove incorrect kernel doc annotation Lars-Peter Clausen
2018-09-10 16:16 ` [PATCH 2/2] staging:iio:ad7606: Add support for the ad7605-4 Lars-Peter Clausen
2018-09-11 7:15 ` Ardelean, Alexandru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180917093000.00004920@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=Michael.Hennerich@analog.com \
--cc=alexandru.Ardelean@analog.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).