From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-it1-f196.google.com ([209.85.166.196]:38892 "EHLO mail-it1-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728067AbeIWC3o (ORCPT ); Sat, 22 Sep 2018 22:29:44 -0400 Date: Sat, 22 Sep 2018 16:34:49 -0400 From: r yang To: Jonathan Cameron Cc: Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Mark Rutland , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v2 2/2] iio: light: bh1750: Add device tree support Message-ID: <20180922203449.GA20818@r> References: <20180922195922.24791-1-decatf@gmail.com> <20180922195922.24791-2-decatf@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20180922195922.24791-2-decatf@gmail.com> Sender: linux-iio-owner@vger.kernel.org List-Id: linux-iio@vger.kernel.org On Sat, Sep 22, 2018 at 03:59:22PM -0400, ryang wrote: > Add device tree support for ROHM BH1750 series ambient light sensors. > > Signed-off-by: ryang > --- > Changes in v2: > - Export module device table > > drivers/iio/light/bh1750.c | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c > index c3a481452b67..ffe2e6d9c2e4 100644 > --- a/drivers/iio/light/bh1750.c > +++ b/drivers/iio/light/bh1750.c > @@ -307,9 +307,20 @@ static const struct i2c_device_id bh1750_id[] = { > }; > MODULE_DEVICE_TABLE(i2c, bh1750_id); > > +static const struct of_device_id bh1750_of_match[] = { > + { .compatible = "rohm,bh1710", }, > + { .compatible = "rohm,bh1715", }, > + { .compatible = "rohm,bh1721", }, > + { .compatible = "rohm,bh1750", }, > + { .compatible = "rohm,bh1751", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, bh1750_of_match); > + > static struct i2c_driver bh1750_driver = { > .driver = { > .name = "bh1750", > + .of_match_table = of_match_ptr(bh1750_of_match), Jonathan, Don't take this patch. I realized that of_match_ptr is NULL when _not_ using CONFIG_OF. So that macro shouldn't be used. Apologies for the bit of mess. I'll send a V3 shortly. > .pm = &bh1750_pm_ops, > }, > .probe = bh1750_probe, > -- > 2.17.1 >