From: Slawomir Stepien <sst@poczta.fm>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org,
knaack.h@gmx.de, pmeerw@pmeerw.net
Cc: linux-iio@vger.kernel.org, gregkh@linuxfoundation.org
Subject: Re: [PATCH 1/1] staging: iio: adc: ad7280a: use devm_* APIs
Date: Fri, 19 Oct 2018 20:00:01 +0200 [thread overview]
Message-ID: <20181019180001.GA20587@x220.localdomain> (raw)
In-Reply-To: <20181017192429.GB6085@x220.localdomain>
On paź 17, 2018 21:24, Slawomir Stepien wrote:
> devm_* APIs are device managed and make code simpler.
In the code, there's also request_threaded_irq that can be replaced with
devm_request_threaded_irq. I'll add it in the v2.
> Signed-off-by: Slawomir Stepien <sst@poczta.fm>
> ---
> drivers/staging/iio/adc/ad7280a.c | 29 ++++++++++-------------------
> 1 file changed, 10 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
> index b736275c10f5..cbb67f1230c7 100644
> --- a/drivers/staging/iio/adc/ad7280a.c
> +++ b/drivers/staging/iio/adc/ad7280a.c
> @@ -8,7 +8,6 @@
>
> #include <linux/device.h>
> #include <linux/kernel.h>
> -#include <linux/slab.h>
> #include <linux/sysfs.h>
> #include <linux/spi/spi.h>
> #include <linux/err.h>
> @@ -492,8 +491,8 @@ static int ad7280_channel_init(struct ad7280_state *st)
> {
> int dev, ch, cnt;
>
> - st->channels = kcalloc((st->slave_num + 1) * 12 + 2,
> - sizeof(*st->channels), GFP_KERNEL);
> + st->channels = devm_kcalloc(&st->spi->dev, (st->slave_num + 1) * 12 + 2,
> + sizeof(*st->channels), GFP_KERNEL);
> if (!st->channels)
> return -ENOMEM;
>
> @@ -553,9 +552,9 @@ static int ad7280_attr_init(struct ad7280_state *st)
> {
> int dev, ch, cnt;
>
> - st->iio_attr = kcalloc(2, sizeof(*st->iio_attr) *
> - (st->slave_num + 1) * AD7280A_CELLS_PER_DEV,
> - GFP_KERNEL);
> + st->iio_attr = devm_kcalloc(&st->spi->dev, 2, sizeof(*st->iio_attr) *
> + (st->slave_num + 1) * AD7280A_CELLS_PER_DEV,
> + GFP_KERNEL);
> if (!st->iio_attr)
> return -ENOMEM;
>
> @@ -692,7 +691,8 @@ static irqreturn_t ad7280_event_handler(int irq, void *private)
> unsigned int *channels;
> int i, ret;
>
> - channels = kcalloc(st->scan_cnt, sizeof(*channels), GFP_KERNEL);
> + channels = devm_kcalloc(&st->spi->dev, st->scan_cnt, sizeof(*channels),
> + GFP_KERNEL);
> if (!channels)
> return IRQ_HANDLED;
>
> @@ -744,7 +744,7 @@ static irqreturn_t ad7280_event_handler(int irq, void *private)
> }
>
> out:
> - kfree(channels);
> + devm_kfree(&st->spi->dev, channels);
>
> return IRQ_HANDLED;
> }
> @@ -909,11 +909,11 @@ static int ad7280_probe(struct spi_device *spi)
>
> ret = ad7280_attr_init(st);
> if (ret < 0)
> - goto error_free_channels;
> + return ret;
>
> ret = iio_device_register(indio_dev);
> if (ret)
> - goto error_free_attr;
> + return ret;
>
> if (spi->irq > 0) {
> ret = ad7280_write(st, AD7280A_DEVADDR_MASTER,
> @@ -944,12 +944,6 @@ static int ad7280_probe(struct spi_device *spi)
> error_unregister:
> iio_device_unregister(indio_dev);
>
> -error_free_attr:
> - kfree(st->iio_attr);
> -
> -error_free_channels:
> - kfree(st->channels);
> -
> return ret;
> }
>
> @@ -965,9 +959,6 @@ static int ad7280_remove(struct spi_device *spi)
> ad7280_write(st, AD7280A_DEVADDR_MASTER, AD7280A_CONTROL_HB, 1,
> AD7280A_CTRL_HB_PWRDN_SW | st->ctrl_hb);
>
> - kfree(st->channels);
> - kfree(st->iio_attr);
> -
> return 0;
> }
>
--
Slawomir Stepien
prev parent reply other threads:[~2018-10-19 18:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-17 19:24 [PATCH 1/1] staging: iio: adc: ad7280a: use devm_* APIs Slawomir Stepien
2018-10-19 18:00 ` Slawomir Stepien [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181019180001.GA20587@x220.localdomain \
--to=sst@poczta.fm \
--cc=Michael.Hennerich@analog.com \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox