From: Slawomir Stepien <sst@poczta.fm>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org,
knaack.h@gmx.de, pmeerw@pmeerw.net
Cc: linux-iio@vger.kernel.org, gregkh@linuxfoundation.org,
Slawomir Stepien <sst@poczta.fm>
Subject: [PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs
Date: Mon, 29 Oct 2018 17:52:41 +0100 [thread overview]
Message-ID: <20181029165241.22993-1-sst@poczta.fm> (raw)
devm_* APIs are device managed and make code simpler.
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
---
drivers/staging/iio/adc/ad7280a.c | 95 +++++++++++++------------------
1 file changed, 39 insertions(+), 56 deletions(-)
diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index b736275c10f5..1263b70693ed 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -342,6 +342,14 @@ static int ad7280_read_all_channels(struct ad7280_state *st, unsigned int cnt,
return sum;
}
+static void ad7280_sw_power_down(void *data)
+{
+ struct ad7280_state *st = data;
+
+ ad7280_write(st, AD7280A_DEVADDR_MASTER, AD7280A_CONTROL_HB, 1,
+ AD7280A_CTRL_HB_PWRDN_SW | st->ctrl_hb);
+}
+
static int ad7280_chain_setup(struct ad7280_state *st)
{
unsigned int val, n;
@@ -492,8 +500,8 @@ static int ad7280_channel_init(struct ad7280_state *st)
{
int dev, ch, cnt;
- st->channels = kcalloc((st->slave_num + 1) * 12 + 2,
- sizeof(*st->channels), GFP_KERNEL);
+ st->channels = devm_kcalloc(&st->spi->dev, (st->slave_num + 1) * 12 + 2,
+ sizeof(*st->channels), GFP_KERNEL);
if (!st->channels)
return -ENOMEM;
@@ -552,16 +560,18 @@ static int ad7280_channel_init(struct ad7280_state *st)
static int ad7280_attr_init(struct ad7280_state *st)
{
int dev, ch, cnt;
+ unsigned int index;
- st->iio_attr = kcalloc(2, sizeof(*st->iio_attr) *
- (st->slave_num + 1) * AD7280A_CELLS_PER_DEV,
- GFP_KERNEL);
+ st->iio_attr = devm_kcalloc(&st->spi->dev, 2, sizeof(*st->iio_attr) *
+ (st->slave_num + 1) * AD7280A_CELLS_PER_DEV,
+ GFP_KERNEL);
if (!st->iio_attr)
return -ENOMEM;
for (dev = 0, cnt = 0; dev <= st->slave_num; dev++)
for (ch = AD7280A_CELL_VOLTAGE_1; ch <= AD7280A_CELL_VOLTAGE_6;
ch++, cnt++) {
+ index = dev * AD7280A_CELLS_PER_DEV + ch;
st->iio_attr[cnt].address =
ad7280a_devaddr(dev) << 8 | ch;
st->iio_attr[cnt].dev_attr.attr.mode =
@@ -571,10 +581,9 @@ static int ad7280_attr_init(struct ad7280_state *st)
st->iio_attr[cnt].dev_attr.store =
ad7280_store_balance_sw;
st->iio_attr[cnt].dev_attr.attr.name =
- kasprintf(GFP_KERNEL,
- "in%d-in%d_balance_switch_en",
- dev * AD7280A_CELLS_PER_DEV + ch,
- dev * AD7280A_CELLS_PER_DEV + ch + 1);
+ devm_kasprintf(&st->spi->dev, GFP_KERNEL,
+ "in%d-in%d_balance_switch_en",
+ index, index + 1);
ad7280_attributes[cnt] =
&st->iio_attr[cnt].dev_attr.attr;
cnt++;
@@ -588,10 +597,9 @@ static int ad7280_attr_init(struct ad7280_state *st)
st->iio_attr[cnt].dev_attr.store =
ad7280_store_balance_timer;
st->iio_attr[cnt].dev_attr.attr.name =
- kasprintf(GFP_KERNEL,
- "in%d-in%d_balance_timer",
- dev * AD7280A_CELLS_PER_DEV + ch,
- dev * AD7280A_CELLS_PER_DEV + ch + 1);
+ devm_kasprintf(&st->spi->dev, GFP_KERNEL,
+ "in%d-in%d_balance_timer",
+ index, index + 1);
ad7280_attributes[cnt] =
&st->iio_attr[cnt].dev_attr.attr;
}
@@ -909,65 +917,41 @@ static int ad7280_probe(struct spi_device *spi)
ret = ad7280_attr_init(st);
if (ret < 0)
- goto error_free_channels;
+ return ret;
- ret = iio_device_register(indio_dev);
+ ret = devm_add_action(&spi->dev, ad7280_sw_power_down, st);
if (ret)
- goto error_free_attr;
+ return ret;
+
+ ret = devm_iio_device_register(&spi->dev, indio_dev);
+ if (ret)
+ return ret;
if (spi->irq > 0) {
ret = ad7280_write(st, AD7280A_DEVADDR_MASTER,
AD7280A_ALERT, 1,
AD7280A_ALERT_RELAY_SIG_CHAIN_DOWN);
if (ret)
- goto error_unregister;
+ return ret;
ret = ad7280_write(st, ad7280a_devaddr(st->slave_num),
AD7280A_ALERT, 0,
AD7280A_ALERT_GEN_STATIC_HIGH |
(pdata->chain_last_alert_ignore & 0xF));
if (ret)
- goto error_unregister;
-
- ret = request_threaded_irq(spi->irq,
- NULL,
- ad7280_event_handler,
- IRQF_TRIGGER_FALLING |
- IRQF_ONESHOT,
- indio_dev->name,
- indio_dev);
+ return ret;
+
+ ret = devm_request_threaded_irq(&spi->dev, spi->irq,
+ NULL,
+ ad7280_event_handler,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ indio_dev->name,
+ indio_dev);
if (ret)
- goto error_unregister;
+ return ret;
}
- return 0;
-error_unregister:
- iio_device_unregister(indio_dev);
-
-error_free_attr:
- kfree(st->iio_attr);
-
-error_free_channels:
- kfree(st->channels);
-
- return ret;
-}
-
-static int ad7280_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad7280_state *st = iio_priv(indio_dev);
-
- if (spi->irq > 0)
- free_irq(spi->irq, indio_dev);
- iio_device_unregister(indio_dev);
-
- ad7280_write(st, AD7280A_DEVADDR_MASTER, AD7280A_CONTROL_HB, 1,
- AD7280A_CTRL_HB_PWRDN_SW | st->ctrl_hb);
-
- kfree(st->channels);
- kfree(st->iio_attr);
-
return 0;
}
@@ -982,7 +966,6 @@ static struct spi_driver ad7280_driver = {
.name = "ad7280",
},
.probe = ad7280_probe,
- .remove = ad7280_remove,
.id_table = ad7280_id,
};
module_spi_driver(ad7280_driver);
--
2.19.1
next reply other threads:[~2018-10-30 1:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-29 16:52 Slawomir Stepien [this message]
2018-11-03 12:21 ` [PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs Jonathan Cameron
2018-11-04 10:48 ` Slawomir Stepien
-- strict thread matches above, loose matches on Subject: below --
2018-10-20 15:18 Slawomir Stepien
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181029165241.22993-1-sst@poczta.fm \
--to=sst@poczta.fm \
--cc=Michael.Hennerich@analog.com \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox