From: Jonathan Cameron <jic23@kernel.org>
To: Slawomir Stepien <sst@poczta.fm>
Cc: lars@metafoo.de, Michael.Hennerich@analog.com, knaack.h@gmx.de,
pmeerw@pmeerw.net, linux-iio@vger.kernel.org,
gregkh@linuxfoundation.org
Subject: Re: [PATCH 1/3] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions
Date: Sun, 2 Dec 2018 15:45:12 +0000 [thread overview]
Message-ID: <20181202154512.5ed31f1f@archlinux> (raw)
In-Reply-To: <20181202115830.20363-2-sst@poczta.fm>
On Sun, 2 Dec 2018 12:58:28 +0100
Slawomir Stepien <sst@poczta.fm> wrote:
> The ad7280_channel_init function has been split into more specific
> functions to increase the code readability.
>
> Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Hi Slawomir,
A few comments inline. I agree with the basic idea, but suggest
a slight different balance in where things are handled.
Jonathan
> ---
> drivers/staging/iio/adc/ad7280a.c | 119 +++++++++++++++++++-----------
> 1 file changed, 77 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
> index 7a0ba26f9fd9..a6b1bdd9f372 100644
> --- a/drivers/staging/iio/adc/ad7280a.c
> +++ b/drivers/staging/iio/adc/ad7280a.c
> @@ -496,6 +496,75 @@ static const struct attribute_group ad7280_attrs_group = {
> .attrs = ad7280_attributes,
> };
>
> +static void ad7280_voltage_channel_init(struct ad7280_state *st, int cnt,
> + int dev, int ch)
> +{
> + struct iio_chan_spec *chan = &st->channels[cnt];
Pass the chan spec in here instead of the _state structure.
It will give cleaner code and better visibility on the scope of
this function where it is called.
> +
> + chan->type = IIO_VOLTAGE;
> + chan->differential = 1;
> + chan->channel = (dev * 6) + ch;
This offset does seem more than a little random buried away in this function.
I would pass it in explicitly as a parameter so that the we have all the
channel number manipulations visible in one place.
> + chan->channel2 = chan->channel + 1;
> +}
> +
> +static void ad7280_temp_channel_init(struct ad7280_state *st, int cnt, int dev,
> + int ch)
> +{
> + struct iio_chan_spec *chan = &st->channels[cnt];
> +
> + chan->type = IIO_TEMP;
> + chan->channel = (dev * 6) + ch - 6;
This one is even more obscure when found in here. Pass it in as an additional parameter.
> +}
> +
> +static void ad7280_common_fields_init(struct ad7280_state *st, int cnt, int dev,
> + int ch)
It's not really the common fields given the voltage version is different.
Perhaps there is a better name for this function?
> +{
> + struct iio_chan_spec *chan = &st->channels[cnt];
> +
> + chan->indexed = 1;
> + chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> + chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
> + chan->address = ad7280a_devaddr(dev) << 8 | ch;
> + chan->scan_index = cnt;
> + chan->scan_type.sign = 'u';
> + chan->scan_type.realbits = 12;
> + chan->scan_type.storagebits = 32;
> + chan->scan_type.shift = 0;
I doubt there is any need to set shift and 0 is the obvious default
so no 'documentation' benefit in doing it here.
> +}
> +
> +static void ad7280_all_voltage_channel_init(struct ad7280_state *st, int cnt,
> + int dev)
Total voltage perhaps rather than 'all'?
> +{
> + struct iio_chan_spec *chan = &st->channels[cnt];
> +
> + chan->type = IIO_VOLTAGE;
> + chan->differential = 1;
> + chan->channel = 0;
> + chan->channel2 = dev * 6;
> + chan->address = AD7280A_ALL_CELLS;
> + chan->indexed = 1;
> + chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> + chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
> + chan->scan_index = cnt;
> + chan->scan_type.sign = 'u';
> + chan->scan_type.realbits = 32;
> + chan->scan_type.storagebits = 32;
> + chan->scan_type.shift = 0;
> +}
> +
> +static void ad7280_timestamp_channel_init(struct ad7280_state *st, int cnt)
> +{
> + struct iio_chan_spec *chan = &st->channels[cnt];
> +
> + chan->type = IIO_TIMESTAMP;
> + chan->channel = -1;
> + chan->scan_index = cnt;
> + chan->scan_type.sign = 's';
> + chan->scan_type.realbits = 64;
> + chan->scan_type.storagebits = 64;
> + chan->scan_type.shift = 0;
> +}
> +
> static int ad7280_channel_init(struct ad7280_state *st)
> {
> int dev, ch, cnt;
> @@ -508,51 +577,17 @@ static int ad7280_channel_init(struct ad7280_state *st)
> for (dev = 0, cnt = 0; dev <= st->slave_num; dev++)
> for (ch = AD7280A_CELL_VOLTAGE_1; ch <= AD7280A_AUX_ADC_6;
> ch++, cnt++) {
> - if (ch < AD7280A_AUX_ADC_1) {
> - st->channels[cnt].type = IIO_VOLTAGE;
> - st->channels[cnt].differential = 1;
> - st->channels[cnt].channel = (dev * 6) + ch;
> - st->channels[cnt].channel2 =
> - st->channels[cnt].channel + 1;
> - } else {
> - st->channels[cnt].type = IIO_TEMP;
> - st->channels[cnt].channel = (dev * 6) + ch - 6;
> - }
> - st->channels[cnt].indexed = 1;
> - st->channels[cnt].info_mask_separate =
> - BIT(IIO_CHAN_INFO_RAW);
> - st->channels[cnt].info_mask_shared_by_type =
> - BIT(IIO_CHAN_INFO_SCALE);
> - st->channels[cnt].address =
> - ad7280a_devaddr(dev) << 8 | ch;
> - st->channels[cnt].scan_index = cnt;
> - st->channels[cnt].scan_type.sign = 'u';
> - st->channels[cnt].scan_type.realbits = 12;
> - st->channels[cnt].scan_type.storagebits = 32;
> - st->channels[cnt].scan_type.shift = 0;
> + if (ch < AD7280A_AUX_ADC_1)
> + ad7280_voltage_channel_init(st, cnt, dev, ch);
> + else
> + ad7280_temp_channel_init(st, cnt, dev, ch);
> +
> + ad7280_common_fields_init(st, cnt, dev, ch);
> }
>
> - st->channels[cnt].type = IIO_VOLTAGE;
> - st->channels[cnt].differential = 1;
> - st->channels[cnt].channel = 0;
> - st->channels[cnt].channel2 = dev * 6;
> - st->channels[cnt].address = AD7280A_ALL_CELLS;
> - st->channels[cnt].indexed = 1;
> - st->channels[cnt].info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> - st->channels[cnt].info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
> - st->channels[cnt].scan_index = cnt;
> - st->channels[cnt].scan_type.sign = 'u';
> - st->channels[cnt].scan_type.realbits = 32;
> - st->channels[cnt].scan_type.storagebits = 32;
> - st->channels[cnt].scan_type.shift = 0;
> + ad7280_all_voltage_channel_init(st, cnt, dev);
> cnt++;
> - st->channels[cnt].type = IIO_TIMESTAMP;
> - st->channels[cnt].channel = -1;
> - st->channels[cnt].scan_index = cnt;
> - st->channels[cnt].scan_type.sign = 's';
> - st->channels[cnt].scan_type.realbits = 64;
> - st->channels[cnt].scan_type.storagebits = 64;
> - st->channels[cnt].scan_type.shift = 0;
> + ad7280_timestamp_channel_init(st, cnt);
>
> return cnt + 1;
> }
next prev parent reply other threads:[~2018-12-02 15:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-02 11:58 [PATCH 0/3] staging: iio: adc: ad7280a: channel and attr init refactor Slawomir Stepien
2018-12-02 11:58 ` [PATCH 1/3] staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions Slawomir Stepien
2018-12-02 15:45 ` Jonathan Cameron [this message]
2018-12-03 20:06 ` Slawomir Stepien
2018-12-04 12:43 ` Jonathan Cameron
2018-12-02 11:58 ` [PATCH 2/3] staging: iio: adc: ad7280a: split ad7280_attr_init() " Slawomir Stepien
2018-12-02 15:47 ` Jonathan Cameron
2018-12-02 11:58 ` [PATCH 3/3] staging: iio: adc: ad7280a: add braces to complex for loops Slawomir Stepien
2018-12-02 15:47 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181202154512.5ed31f1f@archlinux \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=sst@poczta.fm \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox