[PATCH AUTOSEL 3.18 01/61] staging: iio: adc: ad7280a: handle error from __ad7280_read32()

[PATCH AUTOSEL 3.18 01/61] staging: iio: adc: ad7280a: handle error from __ad7280_read32()

[Sasha Levin]

From: Slawomir Stepien <sst@poczta.fm>

[ Upstream commit 0559ef7fde67bc6c83c6eb6329dbd6649528263e ]

Inside __ad7280_read32(), the spi_sync_transfer() can fail with negative
error code. This change will ensure that this error is being passed up
in the call stack, so it can be handled.

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/adc/ad7280a.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index d215edf66af2..0ad4af5d0ae4 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -250,7 +250,9 @@ static int ad7280_read(struct ad7280_state *st, unsigned devaddr,
 	if (ret)
 		return ret;
 
-	__ad7280_read32(st, &tmp);
+	ret = __ad7280_read32(st, &tmp);
+	if (ret)
+		return ret;
 
 	if (ad7280_check_crc(st, tmp))
 		return -EIO;
@@ -288,7 +290,9 @@ static int ad7280_read_channel(struct ad7280_state *st, unsigned devaddr,
 
 	ad7280_delay(st);
 
-	__ad7280_read32(st, &tmp);
+	ret = __ad7280_read32(st, &tmp);
+	if (ret)
+		return ret;
 
 	if (ad7280_check_crc(st, tmp))
 		return -EIO;
@@ -321,7 +325,9 @@ static int ad7280_read_all_channels(struct ad7280_state *st, unsigned cnt,
 	ad7280_delay(st);
 
 	for (i = 0; i < cnt; i++) {
-		__ad7280_read32(st, &tmp);
+		ret = __ad7280_read32(st, &tmp);
+		if (ret)
+			return ret;
 
 		if (ad7280_check_crc(st, tmp))
 			return -EIO;
@@ -364,7 +370,10 @@ static int ad7280_chain_setup(struct ad7280_state *st)
 		return ret;
 
 	for (n = 0; n <= AD7280A_MAX_CHAIN; n++) {
-		__ad7280_read32(st, &val);
+		ret = __ad7280_read32(st, &val);
+		if (ret)
+			return ret;
+
 		if (val == 0)
 			return n - 1;
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 10/61] staging:iio:ad2s90: Make probe handle spi_setup failure

[Sasha Levin]

From: Matheus Tavares <matheus.bernardino@usp.br>

[ Upstream commit b3a3eafeef769c6982e15f83631dcbf8d1794efb ]

Previously, ad2s90_probe ignored the return code from spi_setup, not
handling its possible failure. This patch makes ad2s90_probe check if
the code is an error code and, if so, do the following:

- Call dev_err with an appropriate error message.
- Return the spi_setup's error code.

Note: The 'return ret' statement could be out of the 'if' block, but
this whole block will be moved up in the function in the patch:
'staging:iio:ad2s90: Move device registration to the end of probe'.

Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/resolver/ad2s90.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
index e24c5890652f..c0cee97bd0f1 100644
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ b/drivers/staging/iio/resolver/ad2s90.c
@@ -86,7 +86,12 @@ static int ad2s90_probe(struct spi_device *spi)
 	/* need 600ns between CS and the first falling edge of SCLK */
 	spi->max_speed_hz = 830000;
 	spi->mode = SPI_MODE_3;
-	spi_setup(spi);
+	ret = spi_setup(spi);
+
+	if (ret < 0) {
+		dev_err(&spi->dev, "spi_setup failed!\n");
+		return ret;
+	}
 
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 3.18 11/61] staging: iio: ad7780: update voltage on read

[Sasha Levin]

From: Renato Lui Geh <renatogeh@gmail.com>

[ Upstream commit 336650c785b62c3bea7c8cf6061c933a90241f67 ]

The ad7780 driver previously did not read the correct device output, as
it read an outdated value set at initialization. It now updates its
voltage on read.

Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/adc/ad7780.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index 273add3ed63f..5a3072740326 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -90,12 +90,16 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 			   long m)
 {
 	struct ad7780_state *st = iio_priv(indio_dev);
+	int voltage_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
 		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
-		*val = st->int_vref_mv * st->gain;
+		voltage_uv = regulator_get_voltage(st->reg);
+		if (voltage_uv < 0)
+			return voltage_uv;
+		*val = (voltage_uv / 1000) * st->gain;
 		*val2 = chan->scan_type.realbits - 1;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
-- 
2.19.1