From: Alexandru Ardelean <ardeleanalex@gmail.com>
To: linux-iio@vger.kernel.org
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH 5/5] iio: imu: adis16400: move adis16400.h into adis16400.c
Date: Fri, 22 Mar 2019 22:44:42 +0200 [thread overview]
Message-ID: <20190322204442.4035-5-ardeleanalex@gmail.com> (raw)
In-Reply-To: <20190322204442.4035-1-ardeleanalex@gmail.com>
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
Final part of the re-organization. Move the `adis16400.h` into
`adis16400.c` since it no longer needs to be shared among other files.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/imu/adis16400.c | 176 +++++++++++++++++++++++++++++++-
drivers/iio/imu/adis16400.h | 197 ------------------------------------
2 files changed, 175 insertions(+), 198 deletions(-)
delete mode 100644 drivers/iio/imu/adis16400.h
diff --git a/drivers/iio/imu/adis16400.c b/drivers/iio/imu/adis16400.c
index 265c0a46597f..aef9c4d5edb8 100644
--- a/drivers/iio/imu/adis16400.c
+++ b/drivers/iio/imu/adis16400.c
@@ -32,8 +32,182 @@
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/imu/adis.h>
+
+#define ADIS16400_STARTUP_DELAY 290 /* ms */
+#define ADIS16400_MTEST_DELAY 90 /* ms */
+
+#define ADIS16400_FLASH_CNT 0x00 /* Flash memory write count */
+#define ADIS16400_SUPPLY_OUT 0x02 /* Power supply measurement */
+#define ADIS16400_XGYRO_OUT 0x04 /* X-axis gyroscope output */
+#define ADIS16400_YGYRO_OUT 0x06 /* Y-axis gyroscope output */
+#define ADIS16400_ZGYRO_OUT 0x08 /* Z-axis gyroscope output */
+#define ADIS16400_XACCL_OUT 0x0A /* X-axis accelerometer output */
+#define ADIS16400_YACCL_OUT 0x0C /* Y-axis accelerometer output */
+#define ADIS16400_ZACCL_OUT 0x0E /* Z-axis accelerometer output */
+#define ADIS16400_XMAGN_OUT 0x10 /* X-axis magnetometer measurement */
+#define ADIS16400_YMAGN_OUT 0x12 /* Y-axis magnetometer measurement */
+#define ADIS16400_ZMAGN_OUT 0x14 /* Z-axis magnetometer measurement */
+#define ADIS16400_TEMP_OUT 0x16 /* Temperature output */
+#define ADIS16400_AUX_ADC 0x18 /* Auxiliary ADC measurement */
+
+#define ADIS16350_XTEMP_OUT 0x10 /* X-axis gyroscope temperature measurement */
+#define ADIS16350_YTEMP_OUT 0x12 /* Y-axis gyroscope temperature measurement */
+#define ADIS16350_ZTEMP_OUT 0x14 /* Z-axis gyroscope temperature measurement */
+
+#define ADIS16300_PITCH_OUT 0x12 /* X axis inclinometer output measurement */
+#define ADIS16300_ROLL_OUT 0x14 /* Y axis inclinometer output measurement */
+#define ADIS16300_AUX_ADC 0x16 /* Auxiliary ADC measurement */
+
+#define ADIS16448_BARO_OUT 0x16 /* Barometric pressure output */
+#define ADIS16448_TEMP_OUT 0x18 /* Temperature output */
+
+/* Calibration parameters */
+#define ADIS16400_XGYRO_OFF 0x1A /* X-axis gyroscope bias offset factor */
+#define ADIS16400_YGYRO_OFF 0x1C /* Y-axis gyroscope bias offset factor */
+#define ADIS16400_ZGYRO_OFF 0x1E /* Z-axis gyroscope bias offset factor */
+#define ADIS16400_XACCL_OFF 0x20 /* X-axis acceleration bias offset factor */
+#define ADIS16400_YACCL_OFF 0x22 /* Y-axis acceleration bias offset factor */
+#define ADIS16400_ZACCL_OFF 0x24 /* Z-axis acceleration bias offset factor */
+#define ADIS16400_XMAGN_HIF 0x26 /* X-axis magnetometer, hard-iron factor */
+#define ADIS16400_YMAGN_HIF 0x28 /* Y-axis magnetometer, hard-iron factor */
+#define ADIS16400_ZMAGN_HIF 0x2A /* Z-axis magnetometer, hard-iron factor */
+#define ADIS16400_XMAGN_SIF 0x2C /* X-axis magnetometer, soft-iron factor */
+#define ADIS16400_YMAGN_SIF 0x2E /* Y-axis magnetometer, soft-iron factor */
+#define ADIS16400_ZMAGN_SIF 0x30 /* Z-axis magnetometer, soft-iron factor */
+
+#define ADIS16400_GPIO_CTRL 0x32 /* Auxiliary digital input/output control */
+#define ADIS16400_MSC_CTRL 0x34 /* Miscellaneous control */
+#define ADIS16400_SMPL_PRD 0x36 /* Internal sample period (rate) control */
+#define ADIS16400_SENS_AVG 0x38 /* Dynamic range and digital filter control */
+#define ADIS16400_SLP_CNT 0x3A /* Sleep mode control */
+#define ADIS16400_DIAG_STAT 0x3C /* System status */
+
+/* Alarm functions */
+#define ADIS16400_GLOB_CMD 0x3E /* System command */
+#define ADIS16400_ALM_MAG1 0x40 /* Alarm 1 amplitude threshold */
+#define ADIS16400_ALM_MAG2 0x42 /* Alarm 2 amplitude threshold */
+#define ADIS16400_ALM_SMPL1 0x44 /* Alarm 1 sample size */
+#define ADIS16400_ALM_SMPL2 0x46 /* Alarm 2 sample size */
+#define ADIS16400_ALM_CTRL 0x48 /* Alarm control */
+#define ADIS16400_AUX_DAC 0x4A /* Auxiliary DAC data */
+
+#define ADIS16334_LOT_ID1 0x52 /* Lot identification code 1 */
+#define ADIS16334_LOT_ID2 0x54 /* Lot identification code 2 */
+#define ADIS16400_PRODUCT_ID 0x56 /* Product identifier */
+#define ADIS16334_SERIAL_NUMBER 0x58 /* Serial number, lot specific */
+
+#define ADIS16400_ERROR_ACTIVE (1<<14)
+#define ADIS16400_NEW_DATA (1<<14)
+
+/* MSC_CTRL */
+#define ADIS16400_MSC_CTRL_MEM_TEST (1<<11)
+#define ADIS16400_MSC_CTRL_INT_SELF_TEST (1<<10)
+#define ADIS16400_MSC_CTRL_NEG_SELF_TEST (1<<9)
+#define ADIS16400_MSC_CTRL_POS_SELF_TEST (1<<8)
+#define ADIS16400_MSC_CTRL_GYRO_BIAS (1<<7)
+#define ADIS16400_MSC_CTRL_ACCL_ALIGN (1<<6)
+#define ADIS16400_MSC_CTRL_DATA_RDY_EN (1<<2)
+#define ADIS16400_MSC_CTRL_DATA_RDY_POL_HIGH (1<<1)
+#define ADIS16400_MSC_CTRL_DATA_RDY_DIO2 (1<<0)
+
+/* SMPL_PRD */
+#define ADIS16400_SMPL_PRD_TIME_BASE (1<<7)
+#define ADIS16400_SMPL_PRD_DIV_MASK 0x7F
+
+/* DIAG_STAT */
+#define ADIS16400_DIAG_STAT_ZACCL_FAIL 15
+#define ADIS16400_DIAG_STAT_YACCL_FAIL 14
+#define ADIS16400_DIAG_STAT_XACCL_FAIL 13
+#define ADIS16400_DIAG_STAT_XGYRO_FAIL 12
+#define ADIS16400_DIAG_STAT_YGYRO_FAIL 11
+#define ADIS16400_DIAG_STAT_ZGYRO_FAIL 10
+#define ADIS16400_DIAG_STAT_ALARM2 9
+#define ADIS16400_DIAG_STAT_ALARM1 8
+#define ADIS16400_DIAG_STAT_FLASH_CHK 6
+#define ADIS16400_DIAG_STAT_SELF_TEST 5
+#define ADIS16400_DIAG_STAT_OVERFLOW 4
+#define ADIS16400_DIAG_STAT_SPI_FAIL 3
+#define ADIS16400_DIAG_STAT_FLASH_UPT 2
+#define ADIS16400_DIAG_STAT_POWER_HIGH 1
+#define ADIS16400_DIAG_STAT_POWER_LOW 0
+
+/* GLOB_CMD */
+#define ADIS16400_GLOB_CMD_SW_RESET (1<<7)
+#define ADIS16400_GLOB_CMD_P_AUTO_NULL (1<<4)
+#define ADIS16400_GLOB_CMD_FLASH_UPD (1<<3)
+#define ADIS16400_GLOB_CMD_DAC_LATCH (1<<2)
+#define ADIS16400_GLOB_CMD_FAC_CALIB (1<<1)
+#define ADIS16400_GLOB_CMD_AUTO_NULL (1<<0)
+
+/* SLP_CNT */
+#define ADIS16400_SLP_CNT_POWER_OFF (1<<8)
+
+#define ADIS16334_RATE_DIV_SHIFT 8
+#define ADIS16334_RATE_INT_CLK BIT(0)
+
+#define ADIS16400_SPI_SLOW (u32)(300 * 1000)
+#define ADIS16400_SPI_BURST (u32)(1000 * 1000)
+#define ADIS16400_SPI_FAST (u32)(2000 * 1000)
+
+#define ADIS16400_HAS_PROD_ID BIT(0)
+#define ADIS16400_NO_BURST BIT(1)
+#define ADIS16400_HAS_SLOW_MODE BIT(2)
+#define ADIS16400_HAS_SERIAL_NUMBER BIT(3)
+#define ADIS16400_BURST_DIAG_STAT BIT(4)
+
+struct adis16400_state;
+
+struct adis16400_chip_info {
+ const struct iio_chan_spec *channels;
+ const int num_channels;
+ const long flags;
+ unsigned int gyro_scale_micro;
+ unsigned int accel_scale_micro;
+ int temp_scale_nano;
+ int temp_offset;
+ int (*set_freq)(struct adis16400_state *st, unsigned int freq);
+ int (*get_freq)(struct adis16400_state *st);
+};
+
+/**
+ * struct adis16400_state - device instance specific data
+ * @variant: chip variant info
+ * @filt_int: integer part of requested filter frequency
+ * @adis: adis device
+ **/
+struct adis16400_state {
+ struct adis16400_chip_info *variant;
+ int filt_int;
+
+ struct adis adis;
+ unsigned long avail_scan_mask[2];
+};
-#include "adis16400.h"
+/* At the moment triggers are only used for ring buffer
+ * filling. This may change!
+ */
+
+enum {
+ ADIS16400_SCAN_SUPPLY,
+ ADIS16400_SCAN_GYRO_X,
+ ADIS16400_SCAN_GYRO_Y,
+ ADIS16400_SCAN_GYRO_Z,
+ ADIS16400_SCAN_ACC_X,
+ ADIS16400_SCAN_ACC_Y,
+ ADIS16400_SCAN_ACC_Z,
+ ADIS16400_SCAN_MAGN_X,
+ ADIS16400_SCAN_MAGN_Y,
+ ADIS16400_SCAN_MAGN_Z,
+ ADIS16400_SCAN_BARO,
+ ADIS16350_SCAN_TEMP_X,
+ ADIS16350_SCAN_TEMP_Y,
+ ADIS16350_SCAN_TEMP_Z,
+ ADIS16300_SCAN_INCLI_X,
+ ADIS16300_SCAN_INCLI_Y,
+ ADIS16400_SCAN_ADC,
+ ADIS16400_SCAN_TIMESTAMP,
+};
#ifdef CONFIG_DEBUG_FS
diff --git a/drivers/iio/imu/adis16400.h b/drivers/iio/imu/adis16400.h
deleted file mode 100644
index 7e2e0dbaa2e1..000000000000
--- a/drivers/iio/imu/adis16400.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * adis16400.h support Analog Devices ADIS16400
- * 3d 18g accelerometers,
- * 3d gyroscopes,
- * 3d 2.5gauss magnetometers via SPI
- *
- * Copyright (c) 2009 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
- * Copyright (c) 2007 Jonathan Cameron <jic23@kernel.org>
- *
- * Loosely based upon lis3l02dq.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef SPI_ADIS16400_H_
-#define SPI_ADIS16400_H_
-
-#include <linux/iio/imu/adis.h>
-
-#define ADIS16400_STARTUP_DELAY 290 /* ms */
-#define ADIS16400_MTEST_DELAY 90 /* ms */
-
-#define ADIS16400_FLASH_CNT 0x00 /* Flash memory write count */
-#define ADIS16400_SUPPLY_OUT 0x02 /* Power supply measurement */
-#define ADIS16400_XGYRO_OUT 0x04 /* X-axis gyroscope output */
-#define ADIS16400_YGYRO_OUT 0x06 /* Y-axis gyroscope output */
-#define ADIS16400_ZGYRO_OUT 0x08 /* Z-axis gyroscope output */
-#define ADIS16400_XACCL_OUT 0x0A /* X-axis accelerometer output */
-#define ADIS16400_YACCL_OUT 0x0C /* Y-axis accelerometer output */
-#define ADIS16400_ZACCL_OUT 0x0E /* Z-axis accelerometer output */
-#define ADIS16400_XMAGN_OUT 0x10 /* X-axis magnetometer measurement */
-#define ADIS16400_YMAGN_OUT 0x12 /* Y-axis magnetometer measurement */
-#define ADIS16400_ZMAGN_OUT 0x14 /* Z-axis magnetometer measurement */
-#define ADIS16400_TEMP_OUT 0x16 /* Temperature output */
-#define ADIS16400_AUX_ADC 0x18 /* Auxiliary ADC measurement */
-
-#define ADIS16350_XTEMP_OUT 0x10 /* X-axis gyroscope temperature measurement */
-#define ADIS16350_YTEMP_OUT 0x12 /* Y-axis gyroscope temperature measurement */
-#define ADIS16350_ZTEMP_OUT 0x14 /* Z-axis gyroscope temperature measurement */
-
-#define ADIS16300_PITCH_OUT 0x12 /* X axis inclinometer output measurement */
-#define ADIS16300_ROLL_OUT 0x14 /* Y axis inclinometer output measurement */
-#define ADIS16300_AUX_ADC 0x16 /* Auxiliary ADC measurement */
-
-#define ADIS16448_BARO_OUT 0x16 /* Barometric pressure output */
-#define ADIS16448_TEMP_OUT 0x18 /* Temperature output */
-
-/* Calibration parameters */
-#define ADIS16400_XGYRO_OFF 0x1A /* X-axis gyroscope bias offset factor */
-#define ADIS16400_YGYRO_OFF 0x1C /* Y-axis gyroscope bias offset factor */
-#define ADIS16400_ZGYRO_OFF 0x1E /* Z-axis gyroscope bias offset factor */
-#define ADIS16400_XACCL_OFF 0x20 /* X-axis acceleration bias offset factor */
-#define ADIS16400_YACCL_OFF 0x22 /* Y-axis acceleration bias offset factor */
-#define ADIS16400_ZACCL_OFF 0x24 /* Z-axis acceleration bias offset factor */
-#define ADIS16400_XMAGN_HIF 0x26 /* X-axis magnetometer, hard-iron factor */
-#define ADIS16400_YMAGN_HIF 0x28 /* Y-axis magnetometer, hard-iron factor */
-#define ADIS16400_ZMAGN_HIF 0x2A /* Z-axis magnetometer, hard-iron factor */
-#define ADIS16400_XMAGN_SIF 0x2C /* X-axis magnetometer, soft-iron factor */
-#define ADIS16400_YMAGN_SIF 0x2E /* Y-axis magnetometer, soft-iron factor */
-#define ADIS16400_ZMAGN_SIF 0x30 /* Z-axis magnetometer, soft-iron factor */
-
-#define ADIS16400_GPIO_CTRL 0x32 /* Auxiliary digital input/output control */
-#define ADIS16400_MSC_CTRL 0x34 /* Miscellaneous control */
-#define ADIS16400_SMPL_PRD 0x36 /* Internal sample period (rate) control */
-#define ADIS16400_SENS_AVG 0x38 /* Dynamic range and digital filter control */
-#define ADIS16400_SLP_CNT 0x3A /* Sleep mode control */
-#define ADIS16400_DIAG_STAT 0x3C /* System status */
-
-/* Alarm functions */
-#define ADIS16400_GLOB_CMD 0x3E /* System command */
-#define ADIS16400_ALM_MAG1 0x40 /* Alarm 1 amplitude threshold */
-#define ADIS16400_ALM_MAG2 0x42 /* Alarm 2 amplitude threshold */
-#define ADIS16400_ALM_SMPL1 0x44 /* Alarm 1 sample size */
-#define ADIS16400_ALM_SMPL2 0x46 /* Alarm 2 sample size */
-#define ADIS16400_ALM_CTRL 0x48 /* Alarm control */
-#define ADIS16400_AUX_DAC 0x4A /* Auxiliary DAC data */
-
-#define ADIS16334_LOT_ID1 0x52 /* Lot identification code 1 */
-#define ADIS16334_LOT_ID2 0x54 /* Lot identification code 2 */
-#define ADIS16400_PRODUCT_ID 0x56 /* Product identifier */
-#define ADIS16334_SERIAL_NUMBER 0x58 /* Serial number, lot specific */
-
-#define ADIS16400_ERROR_ACTIVE (1<<14)
-#define ADIS16400_NEW_DATA (1<<14)
-
-/* MSC_CTRL */
-#define ADIS16400_MSC_CTRL_MEM_TEST (1<<11)
-#define ADIS16400_MSC_CTRL_INT_SELF_TEST (1<<10)
-#define ADIS16400_MSC_CTRL_NEG_SELF_TEST (1<<9)
-#define ADIS16400_MSC_CTRL_POS_SELF_TEST (1<<8)
-#define ADIS16400_MSC_CTRL_GYRO_BIAS (1<<7)
-#define ADIS16400_MSC_CTRL_ACCL_ALIGN (1<<6)
-#define ADIS16400_MSC_CTRL_DATA_RDY_EN (1<<2)
-#define ADIS16400_MSC_CTRL_DATA_RDY_POL_HIGH (1<<1)
-#define ADIS16400_MSC_CTRL_DATA_RDY_DIO2 (1<<0)
-
-/* SMPL_PRD */
-#define ADIS16400_SMPL_PRD_TIME_BASE (1<<7)
-#define ADIS16400_SMPL_PRD_DIV_MASK 0x7F
-
-/* DIAG_STAT */
-#define ADIS16400_DIAG_STAT_ZACCL_FAIL 15
-#define ADIS16400_DIAG_STAT_YACCL_FAIL 14
-#define ADIS16400_DIAG_STAT_XACCL_FAIL 13
-#define ADIS16400_DIAG_STAT_XGYRO_FAIL 12
-#define ADIS16400_DIAG_STAT_YGYRO_FAIL 11
-#define ADIS16400_DIAG_STAT_ZGYRO_FAIL 10
-#define ADIS16400_DIAG_STAT_ALARM2 9
-#define ADIS16400_DIAG_STAT_ALARM1 8
-#define ADIS16400_DIAG_STAT_FLASH_CHK 6
-#define ADIS16400_DIAG_STAT_SELF_TEST 5
-#define ADIS16400_DIAG_STAT_OVERFLOW 4
-#define ADIS16400_DIAG_STAT_SPI_FAIL 3
-#define ADIS16400_DIAG_STAT_FLASH_UPT 2
-#define ADIS16400_DIAG_STAT_POWER_HIGH 1
-#define ADIS16400_DIAG_STAT_POWER_LOW 0
-
-/* GLOB_CMD */
-#define ADIS16400_GLOB_CMD_SW_RESET (1<<7)
-#define ADIS16400_GLOB_CMD_P_AUTO_NULL (1<<4)
-#define ADIS16400_GLOB_CMD_FLASH_UPD (1<<3)
-#define ADIS16400_GLOB_CMD_DAC_LATCH (1<<2)
-#define ADIS16400_GLOB_CMD_FAC_CALIB (1<<1)
-#define ADIS16400_GLOB_CMD_AUTO_NULL (1<<0)
-
-/* SLP_CNT */
-#define ADIS16400_SLP_CNT_POWER_OFF (1<<8)
-
-#define ADIS16334_RATE_DIV_SHIFT 8
-#define ADIS16334_RATE_INT_CLK BIT(0)
-
-#define ADIS16400_SPI_SLOW (u32)(300 * 1000)
-#define ADIS16400_SPI_BURST (u32)(1000 * 1000)
-#define ADIS16400_SPI_FAST (u32)(2000 * 1000)
-
-#define ADIS16400_HAS_PROD_ID BIT(0)
-#define ADIS16400_NO_BURST BIT(1)
-#define ADIS16400_HAS_SLOW_MODE BIT(2)
-#define ADIS16400_HAS_SERIAL_NUMBER BIT(3)
-#define ADIS16400_BURST_DIAG_STAT BIT(4)
-
-struct adis16400_state;
-
-struct adis16400_chip_info {
- const struct iio_chan_spec *channels;
- const int num_channels;
- const long flags;
- unsigned int gyro_scale_micro;
- unsigned int accel_scale_micro;
- int temp_scale_nano;
- int temp_offset;
- int (*set_freq)(struct adis16400_state *st, unsigned int freq);
- int (*get_freq)(struct adis16400_state *st);
-};
-
-/**
- * struct adis16400_state - device instance specific data
- * @variant: chip variant info
- * @filt_int: integer part of requested filter frequency
- * @adis: adis device
- **/
-struct adis16400_state {
- struct adis16400_chip_info *variant;
- int filt_int;
-
- struct adis adis;
- unsigned long avail_scan_mask[2];
-};
-
-/* At the moment triggers are only used for ring buffer
- * filling. This may change!
- */
-
-enum {
- ADIS16400_SCAN_SUPPLY,
- ADIS16400_SCAN_GYRO_X,
- ADIS16400_SCAN_GYRO_Y,
- ADIS16400_SCAN_GYRO_Z,
- ADIS16400_SCAN_ACC_X,
- ADIS16400_SCAN_ACC_Y,
- ADIS16400_SCAN_ACC_Z,
- ADIS16400_SCAN_MAGN_X,
- ADIS16400_SCAN_MAGN_Y,
- ADIS16400_SCAN_MAGN_Z,
- ADIS16400_SCAN_BARO,
- ADIS16350_SCAN_TEMP_X,
- ADIS16350_SCAN_TEMP_Y,
- ADIS16350_SCAN_TEMP_Z,
- ADIS16300_SCAN_INCLI_X,
- ADIS16300_SCAN_INCLI_Y,
- ADIS16400_SCAN_ADC,
- ADIS16400_SCAN_TIMESTAMP,
-};
-
-#endif /* SPI_ADIS16400_H_ */
--
2.17.1
next prev parent reply other threads:[~2019-03-22 20:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-22 20:44 [PATCH 1/5] iio: imu: adis16400: move trigger handler into adis16400_core Alexandru Ardelean
2019-03-22 20:44 ` [PATCH 2/5] iio: imu: adis: generalize burst mode support Alexandru Ardelean
2019-03-24 15:08 ` Jonathan Cameron
2019-03-22 20:44 ` [PATCH 3/5] iio: imu: adis16400: move burst logic to ADIS lib Alexandru Ardelean
2019-03-24 15:10 ` Jonathan Cameron
2019-03-22 20:44 ` [PATCH 4/5] iio: imu: adis16400: rename adis16400_core.c -> adi16400.c Alexandru Ardelean
2019-03-24 15:12 ` Jonathan Cameron
2019-03-22 20:44 ` Alexandru Ardelean [this message]
2019-03-24 15:20 ` [PATCH 5/5] iio: imu: adis16400: move adis16400.h into adis16400.c Jonathan Cameron
2019-03-24 15:04 ` [PATCH 1/5] iio: imu: adis16400: move trigger handler into adis16400_core Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190322204442.4035-5-ardeleanalex@gmail.com \
--to=ardeleanalex@gmail.com \
--cc=alexandru.ardelean@analog.com \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox