Re: [PATCH V2] iio: frequency: ad9523: Fix typo in ad9523_platform_data

[Jonathan Cameron <jic23@jic23.retrosnub.co.uk>]

On Tue, 26 Mar 2019 15:40:03 +0200
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> From: Lars-Peter Clausen <lars@metafoo.de>
> 
> Replace diff_{m1,m2} with div_{m1,m2} since they are dividers and not a
> differential settings.
> 
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Applied to the togreg branch of iio.git and pushed out as testing
for no particular reason.

Note that it would be helpful if, when you post a new version of a
patch despite (I think) no replies to the previous, that you also
reply to that thread to say there is a v2.  Sometimes I run forwards
through my emails and would have applied that before seeing this.

Thanks,

Jonathan

> ---
> 
> Changelog v1->v2:
> * added `frequency:` to prefix for consistency
> 
>  drivers/iio/frequency/ad9523.c       | 16 ++++++++--------
>  include/linux/iio/frequency/ad9523.h |  8 ++++----
>  2 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c
> index 3f9be69499ec..9b9eee27176c 100644
> --- a/drivers/iio/frequency/ad9523.c
> +++ b/drivers/iio/frequency/ad9523.c
> @@ -872,22 +872,22 @@ static int ad9523_setup(struct iio_dev *indio_dev)
>  		return ret;
>  
>  	ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_DIVIDER,
> -		AD9523_PLL2_VCO_DIV_M1(pdata->pll2_vco_diff_m1) |
> -		AD9523_PLL2_VCO_DIV_M2(pdata->pll2_vco_diff_m2) |
> -		AD_IFE(pll2_vco_diff_m1, 0,
> +		AD9523_PLL2_VCO_DIV_M1(pdata->pll2_vco_div_m1) |
> +		AD9523_PLL2_VCO_DIV_M2(pdata->pll2_vco_div_m2) |
> +		AD_IFE(pll2_vco_div_m1, 0,
>  		       AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN) |
> -		AD_IFE(pll2_vco_diff_m2, 0,
> +		AD_IFE(pll2_vco_div_m2, 0,
>  		       AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN));
>  	if (ret < 0)
>  		return ret;
>  
> -	if (pdata->pll2_vco_diff_m1)
> +	if (pdata->pll2_vco_div_m1)
>  		st->vco_out_freq[AD9523_VCO1] =
> -			st->vco_freq / pdata->pll2_vco_diff_m1;
> +			st->vco_freq / pdata->pll2_vco_div_m1;
>  
> -	if (pdata->pll2_vco_diff_m2)
> +	if (pdata->pll2_vco_div_m2)
>  		st->vco_out_freq[AD9523_VCO2] =
> -			st->vco_freq / pdata->pll2_vco_diff_m2;
> +			st->vco_freq / pdata->pll2_vco_div_m2;
>  
>  	st->vco_out_freq[AD9523_VCXO] = pdata->vcxo_freq;
>  
> diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h
> index 12ce3ee427fd..621b93c0bcf9 100644
> --- a/include/linux/iio/frequency/ad9523.h
> +++ b/include/linux/iio/frequency/ad9523.h
> @@ -129,8 +129,8 @@ enum cpole1_capacitor {
>   * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63.
>   * @pll2_freq_doubler_en: PLL2 frequency doubler enable.
>   * @pll2_r2_div: PLL2 R2 divider, range 0..31.
> - * @pll2_vco_diff_m1: VCO1 divider, range 3..5.
> - * @pll2_vco_diff_m2: VCO2 divider, range 3..5.
> + * @pll2_vco_div_m1: VCO1 divider, range 3..5.
> + * @pll2_vco_div_m2: VCO2 divider, range 3..5.
>   * @rpole2: PLL2 loop filter Rpole resistor value.
>   * @rzero: PLL2 loop filter Rzero resistor value.
>   * @cpole1: PLL2 loop filter Cpole capacitor value.
> @@ -176,8 +176,8 @@ struct ad9523_platform_data {
>  	unsigned char			pll2_ndiv_b_cnt;
>  	bool				pll2_freq_doubler_en;
>  	unsigned char			pll2_r2_div;
> -	unsigned char			pll2_vco_diff_m1; /* 3..5 */
> -	unsigned char			pll2_vco_diff_m2; /* 3..5 */
> +	unsigned char			pll2_vco_div_m1; /* 3..5 */
> +	unsigned char			pll2_vco_div_m2; /* 3..5 */
>  
>  	/* Loop Filter PLL2 */
>  	enum rpole2_resistor		rpole2;