From: Jonathan Cameron <jic23@jic23.retrosnub.co.uk>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: Re: [PULL] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
Date: Mon, 1 Apr 2019 22:04:07 +0100 [thread overview]
Message-ID: <20190401220407.78d9b19c@archlinux> (raw)
In-Reply-To: <20190401215936.3d6a460d@archlinux>
Hi Greg,
There is a merge conflict in here against the previous fixes branch
in industrialio-buffer.c. The resolution I would suggest is to take
the cleanup from Andy that is in this branch that moves the
code over to bitmap_kzalloc avoiding the issue that was fixed in
the other branch. I'd not noticed this one sneaking in until I
did a test merge a few minutes ago. Sorry about that.
Thanks for your help (for this and in general!)
Jonathan
On Mon, 1 Apr 2019 21:59:36 +0100
Jonathan Cameron <jic23@kernel.org> wrote:
> The following changes since commit cbebe5d05dd7fe2fdd13cff7c4a62f22109f1f95:
>
> staging: erofs: match alignment with open parentheses (2019-02-19 15:18:49 +0100)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.2a
>
> for you to fetch changes up to 5e79cef581ffcf277c8d10c6373ec7a1be79c5c9:
>
> iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion (2019-03-31 12:07:17 +0100)
>
> ----------------------------------------------------------------
> First set of new device support, features and fixes for IIO in the 5.2 cycle.
>
> Note includes, an immutable branch from MFD to bring in the stmpe code
> to which some fixes were later made.
>
> Staging graduations
> * ad7780
> - Move this ADC driver out of staging. Included adding some new features
> along the way (see below). Also added DT bindings.
>
> New device support
> * adis16480
> - Support the ADIS16495 and ADIS16497 IMU devices making
> heavy use of refactoring of various aspects of the driver in precursor
> patches.
> * lsm6dsx
> - Support for the ASM330LHH 6-axis (accelerometer + gyro) sensor.
> - Support for the LSM6DS0X
> * matbotix mb1232
> - New driver for this ultrasound ranging device family. Including bindings.
> - Supports mb1202, mb1212, mb1222, mb1232, mb1242, mb7040 and mb7137.
> * max31856
> - New driver for this thermocouple temperature sensor.
> * meson saradc
> - Support the Meson-G12A (ID addition only).
> * stmpe-adc
> - New driver supporting generic ADC alongside touchscreen support which
> previously existed. Includes DT bindings.
> * vcnl4000
> - Support for the vcln4040 proximity and light sensor, including adding
> DT bindings for this and parts previously supported.
>
> Features
> * core
> - Allow reading of mount matrices from ACPI in addition to DT.
> - Common binding for theromcouple types.
> * ad5933
> - Add ABI docs as there are a few 'unsual' elements about this
> device - perhaps because it's our only impedance analyser.
> * ad7780
> - Add gain and filter gpio support + readback of current gain and filter.
> * adis16480
> - Allow selection fo the dataready pin to be used.
> - Device tree ID table and binding documentation.
> - Support external clock modes, including new bindings.
> * bma180
> - Mount matrix support.
> * bmc150
> - Mount matrix support.
> * bmg160
> - Mount matrix support.
> - DT id table and bindings doc.
> * bmp280
> - Put calibration data into the entropy pool.
> * hmc5843
> - Mount matrix support.
> * itg3200
> - Mount matrix support.
> * kxcjk1013
> - Device tree id table, and binding docs.
> * lpc32xx
> - Add scale when regulator specified including DT docs for regulator.
> * pms7003
> - Add device IDs for all supported parts to driver and binding.
> * stm32-dfsdm
> - Enable hw consumer support, scan mode control and a complex set of
> triggered buffer modes.
> - Power management.
> * stm32-lptimer-counter
> - power management.
> - Document the pinctrl sleep state binding.
> * ti-ads7950
> - GPIO pin support.
>
> Cleanups, minor fixes
> * core
> - Use bitmap_zalloc to make it explicit that is what we are doing.
> - Tidy up all the Kconfig files (which had slowly gotten messy)
> - Fix a forwards definition missing issue in iio/driver.h
> * ad sigma delta core
> - Improve handling of SPI bus locking vs CS assertion. This has been
> wrong a long time so not rushing this in.
> * ad5064
> - Mlock to local lock.
> * ad5933 (staging cleanup)
> - Multiline comment fixes.
> - Include ordering.
> - SPDX.
> - Tidy up Kconfig help which was a bit missleading.
> - Change some non standard attributes to ABI defined ones.
> * ad7124
> - White space fix.
> * ad7192
> - White space.
> - Use DT clock binding.
> - Improve error reporting.
> - Platform data to DT conversion.
> - Use read_avail callback, mostly to avoid the endless series of
> patches from new contributors trying to falsely put spaces around
> the negative sign.
> * ad7280a
> - Add brackets to macros to avoid potential precedence isseus.
> - Add temp vars for event codes to reduce indent and improved readability.
> - Clean out som CamelCase notation.
> - White space.
> * ad7606
> - Fix broken file naming in MAINTAINERS.
> * ad7766
> - White space fixes.
> * ad7780
> - Missing switch defaults to supress warnings and harden the code slightly.
> - Set pattern masks more directly.
> - Add ID values and masks for all supported chips.
> - SPDX + add Renato as a copyright holder as he has done a lot of work on
> this driver.
> - Add brackets to macros to avoid potential precedence issues.
> * ad7923
> - White space fixes.
> - Use BIT macro to improve readability.
> - Add brackets to macros to avoid potential precedence issues.
> - Tidy up a null comparisom.
> * ad9523
> - Fix a typo in naming of variables.
> * adis16400
> - Combine trigger file into main code as no advantage in separate files.
> Rename core file to just adis16400.
> - Squash the header into the c file now there is only one file.
> - Generalize burst mode to support new variants.
> * ak8975
> - Local variable to improve readability around mount matrix support.
> * as3935
> - Avoid potential race by ensuring remove does exact opposite of
> probe rather than a slightly different order.
> * cross_ec
> - Drop some unnecessary includes.
> - Fix some warning and the slightly 'unusual' code.
> - Add some docs for non obvious function.
> - SPDX
> * hmc5843
> - Potential unhandled error case.
> * iio trigger core
> - Print an error if there is no available irq due to max consumers per
> trigger being set to low.
> * iio loop trigger
> - Drop an unlikely on IS_ERR as IS_ERR already has the annotation.
> * ingenic-adc
> - Drop a redundant dev_err call as devm_ioremap_resource reports the same
> internally.
> * lmp91000
> - Drop some unncessary parentheses and white space tidy up.
> - Invert and if statement to improve readability.
> - Fix a wrong error message.
> * lpc32xx
> - Header sorting + drop some unused ones.
> * mma8542
> - Mark a switch fallthrough.
> * mpu6050
> - Add a local variable to improve code readability around mount matrix
> support.
> * mxs-lradc-adc
> - Handle devm_iio_trigger_alloc failure.
> * sps30
> - Fix up a kernel version in the ABI docs.
> * srf04
> - DT binding doc converted to yaml.
> * ssp_sensors
> - Supress a clang build warning due to lack of visibility of conditional
> within a iio_push_to_buffers_with_timestamp. (reasonable false warning!)
> * st_accel
> - Drop pointless less than 0 comparisom of unsigned int.
> * stm32-dfsdm
> - Improve accuracy of spi_master_frequency calculation.
> - Improve calculation fo sampling frequency.
> - Rework various internals to simplify adding triggered buffer support.
> - Claim direct mode to avoid racing around read_raw and being in buffered
> mode.
> * stmpe
> - Some tidy ups from the mfd tree (immutable branch)
> - Fix a clang false positive warning.
> * ti-ads7950
> - Use local lock rather than using the core mlock when not locking around
> the device mode.
> * vcnl4000
> - Use word writes instead of byte writes. It seems byte writes are fine
> for some parts (undocument) but not others that the driver will shortly
> support.
>
> Other
> * mailmap
> - Add email address change for Sean Nyekjaer. Update in relevant drivers
>
> ----------------------------------------------------------------
> Alexandru Ardelean (5):
> iio: imu: adis16400: move trigger handler into adis16400_core
> iio: imu: adis: generalize burst mode support
> iio: imu: adis16400: move burst logic to ADIS lib
> iio: imu: adis16400: rename adis16400_core.c -> adi16400.c
> iio: imu: adis16400: move adis16400.h into adis16400.c
>
> Anderson Reis (3):
> iio:potentiostat:lmp91000: reduce line width and remove blank line
> iio:potentiostat:lmp91000: invert if statement
> iio:potentiostat:lmp91000: change dev_err message
>
> Andreas Klinger (5):
> dt-bindings: Add vendor prefix for MaxBotix
> dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers
> mb1232.c: add distance iio sensor with i2c
> MAINTAINERS: add maintainer for maxbotix ultrasonic driver
> devantech-srf04.yaml: transform DT binding to YAML
>
> Andy Shevchenko (3):
> iio: Allow to read mount matrix from ACPI
> iio: buffer: Switch to bitmap_zalloc()
> iio: Make possible to include driver.h first
>
> Angus Ainslie (Purism) (5):
> iio: light: vcnl4000 use word writes instead of byte writes
> iio: light: vcnl4000 add devicetree hooks
> dt-bindings: iio: light: add vcnl4000 devicetree bindings
> iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
> dt-bindings: iio: light: add vcnl4040 devicetree bindings
>
> Bárbara Fernandes (4):
> iio:adc:ad7923: Align broken line to parenthesis
> iio:adc:ad7923: Use BIT macro instead of bitshift
> iio:adc:ad7923: Put macro argument between ()'s
> iio:adc:ad7923: Rewrite comparison to NULL
>
> Camylla Gonçalves Cantanheide (1):
> iio: adc: ad7766: Change alignment to match paranthesis
>
> Chengguang Xu (1):
> iio: remove redundant unlikely annotation
>
> Colin Ian King (2):
> iio: st_accel: remove redundant unsigned less than zero check
> iio: adc: ad7124 fix indentation issue, remove extra tab
>
> Cristian Sicilia (4):
> staging: iio: adc: ad7280a: Avoid precedence issues in macro
> staging: iio: adc: ad7280a: Adding temp var to improve readability
> staging: iio: adc: ad7280a: Remove CamelCase notation
> staging: iio: adc: ad7280a: Tab alignment
>
> Enric Balletbo i Serra (1):
> iio: cros_ec: Switch to SPDX identifier.
>
> Enrico Weigelt, metux IT consult (1):
> drivers: iio: Kconfig: pedantic cleanup
>
> Fabrice Gasnier (12):
> dt-bindings: iio: stm32-lptimer-counter: document pinctrl sleep state
> iio: counter: stm32-lptimer: Add power management support
> iio: adc: stm32-dfsdm: make spi_master_freq more accurate
> iio: adc: stm32-dfsdm: continuous mode depends on current mode
> iio: adc: stm32-dfsdm: move dma enable from start_conv() to start_dma()
> iio: adc: stm32-dfsdm: move dma slave config to start routine
> iio: adc: stm32-dfsdm: enable hw consumer
> iio: adc: stm32-dfsdm: add support for scan mode
> iio: adc: stm32-dfsdm: add support for buffer modes
> iio: adc: stm32-dfsdm: claim direct mode for raw read and settings
> iio: adc: stm32-dfsdm: improve sampling frequency accuracy
> iio: adc: stm32-dfsdm: add PM support
>
> Gregory CLEMENT (4):
> iio: adc: lpc32xx: Sort headers
> iio: adc: lpc32xx: Cleanup headers
> iio: adc: lpc32xx: Add scale feature
> dt-bindings: iio: adc: lpc32xx-adc: Document vref-supply
>
> Guenter Roeck (1):
> iio: cros_ec: Drop unnecessary include files
>
> Gustavo A. R. Silva (2):
> iio: mma8452: mark expected switch fall-through
> iio: cros_ec_accel_legacy: Refactor code in cros_ec_accel_legacy_probe
>
> Gwendal Grignou (1):
> iio: cros_ec: Add kernel-doc for cros_ec_sensors_read_lpc
>
> H. Nikolaus Schaller (10):
> iio: accel: bmc150: add mount matrix support
> iio: accel: bma180: add mount matrix support
> iio: gyro: bmg160: add mount matrix support
> iio: gyro: itg3200: add mount matrix support
> iio: magnetometer: bmc150: add mount matrix support
> iio: magnetometer: hmc5843: add mount matrix support
> iio: mpu6050: improve code readability
> iio: ak8975: improve code readability
> iio: gyro: bmg160: add device tree compatibility table
> dt-bindings: iio: add Bosch BMG160 gyroscope sensor
>
> Jonathan Cameron (1):
> iio:dac:ad5064 mlock cleanup - move to a local lock.
>
> Justin Chen (2):
> iio: adc: ti-ads7950: Fix improper use of mlock
> iio: adc: ti-ads7950: add GPIO support
>
> Kangjie Lu (2):
> iio: adc: fix a potential NULL pointer dereference
> iio: hmc5843: fix potential NULL pointer dereferences
>
> Lars-Peter Clausen (2):
> iio: frequency: ad9523: Fix typo in ad9523_platform_data
> iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
>
> Linus Walleij (1):
> iio: pressure: bmp280: BMP280 calibration to entropy
>
> Lorenzo Bianconi (4):
> iio: imu: st_lsm6dsx: add support to ASM330LHH
> dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings
> iio: imu: st_lsm6dsx: add support to LSM6DSOX
> dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings
>
> Lucas Oshiro (1):
> iio:potentiostat:lmp91000: remove unnecessary parentheses
>
> Marcelo Schmitt (6):
> staging: iio: ad5933: change multi-line comment style
> staging: iio: ad5933: organize includes
> staging: iio: ad5933: add SPDX identifier
> staging: iio: ad5933: change help rule message
> staging: iio: ad5933: add ABI documentation
> staging: iio: ad5933: change attributes to match ABI
>
> Mathieu Othacehe (1):
> iio: trigger: Print an error if there is no available irq
>
> Mircea Caprioru (5):
> staging: iio: adc: ad7192: Fix identation
> staging: iio: adc: ad7192: Use DT clock binding
> staging: iio: adc: ad7192: Report error directly in ad7192_setup
> staging: iio: adc: ad7192: Convert platform data to DT properties
> staging: iio: adc: ad7192: Use read_avail for available attributes
>
> Nathan Chancellor (2):
> iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data
> iio: adc: stmpe-adc: Shuffle an if statement around in stmpe_adc_isr
>
> Neil Armstrong (2):
> dt-bindings: iio: adc: document the Meson G12A support
> iio: adc: meson-saradc: add support for Meson G12A
>
> Paresh Chaudhary (2):
> iio:temperature:max31856:Add device tree bind info
> iio:temperature: Add MAX31856 thermocouple support
>
> Patrick Havelange (1):
> dt-bindings: iio/temperature: Add thermocouple types (and doc)
>
> Philippe Schenker (3):
> dt-bindings: stmpe: Reformatting parameter list and use tabs only
> mfd: stmpe: Move ADC related defines to MFD header
> Input: stmpe-ts: preparations for STMPE ADC driver
>
> Renato Lui Geh (11):
> staging: iio: ad7780: add gain & filter gpio support
> staging: iio: ad7780: add missing switch default case
> staging: iio: ad7780: add gain reading to ad778x
> staging: iio: ad7780: add filter reading to ad778x
> staging: iio: ad7780: set pattern values and masks directly
> staging:iio:ad7780: add chip ID values and mask
> staging: iio: ad7780: move regulator to after GPIO init
> staging: iio: ad7780: add SPDX identifier
> staging: iio: ad7780: add new copyright holder
> staging: iio: ad7780: moving ad7780 out of staging
> staging: iio: ad7780: add device tree binding
>
> Robert Yang (3):
> dt-bindings: Add vendor prefix for Kionix, Inc.
> dt-bindings: iio: accel: kxcjk1013: Add device tree binding documentation
> iio: accel: kxcjk1013: Add device tree support
>
> Sean Nyekjaer (3):
> mailmap: Update email for Sean Nyekjaer
> iio: adc: ti-ads8688: Update the module author email address
> iio: dac: ti-dac5571: Update the module author email address
>
> Stefan Agner (3):
> mfd: stmpe: Preparations for STMPE ADC driver
> iio: adc: add STMPE ADC driver using IIO framework
> iio: adc: add STMPE ADC devicetree bindings
>
> Stefan Popa (10):
> iio: imu: adis16480: Add support for configurable drdy indicator
> iio: imu: adis16480: Add OF device ID table
> iio: imu: adis16480: Treat temperature scale in a generic way
> iio: imu: adis16480: Calculate the sampling frequency in a generic way
> iio: imu: adis16480: Deal with filter freq in a generic way
> iio: imu: adis16480: Add support for ADIS1649x family of devices
> iio: imu: adis16480: Add docs for ADIS16480 IMU
> iio: imu: adis16480: Add support for external clock
> dt-bindings: iio: imu: adis16480: Document external clock
> MAINTAINERS: Fix the link to ad7606 dt-bindings
>
> Sven Van Asbroeck (1):
> iio: proximity: as3935: fix use-after-free on device remove
>
> Tomasz Duszynski (3):
> iio: chemical: pms7003: extend supported sensors list
> dt-bindings: iio: chemical: pms7003: extend supported sensors list
> iio: chemical: sps30: fix attribute kernel version
>
> Vladimir Petrigo (1):
> iio: adc: ad7780: Add parentheses to macros
>
> Wei Yongjun (1):
> iio: adc: ingenic: remove redundant dev_err call in ingenic_adc_probe()
>
> .mailmap | 1 +
> .../sysfs-bus-iio-impedance-analyzer-ad5933 | 19 +-
> Documentation/ABI/testing/sysfs-bus-iio-sps30 | 2 +-
> .../ABI/testing/sysfs-bus-iio-temperature-max31856 | 24 +
> .../bindings/iio/accel/kionix,kxcjk1013.txt | 17 +
> .../devicetree/bindings/iio/adc/adi,ad7780.txt | 48 ++
> .../bindings/iio/adc/amlogic,meson-saradc.txt | 1 +
> .../devicetree/bindings/iio/adc/lpc32xx-adc.txt | 5 +
> .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 +
> .../bindings/iio/chemical/plantower,pms7003.txt | 8 +-
> .../bindings/iio/counter/stm32-lptimer-cnt.txt | 8 +-
> .../devicetree/bindings/iio/gyroscope/bmg160.txt | 20 +
> .../devicetree/bindings/iio/imu/adi,adis16480.txt | 85 +++
> .../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 2 +
> .../devicetree/bindings/iio/light/vcnl4000.txt | 24 +
> .../bindings/iio/proximity/devantech-srf04.txt | 28 -
> .../bindings/iio/proximity/devantech-srf04.yaml | 59 ++
> .../bindings/iio/proximity/maxbotix,mb1232.txt | 29 +
> .../bindings/iio/temperature/max31856.txt | 24 +
> .../iio/temperature/temperature-bindings.txt | 7 +
> .../bindings/input/touchscreen/stmpe.txt | 116 +++-
> Documentation/devicetree/bindings/mfd/stmpe.txt | 28 +-
> .../devicetree/bindings/vendor-prefixes.txt | 2 +
> MAINTAINERS | 10 +-
> drivers/iio/Kconfig | 24 +-
> drivers/iio/accel/Kconfig | 48 +-
> drivers/iio/accel/bma180.c | 18 +-
> drivers/iio/accel/bmc150-accel-core.c | 21 +
> drivers/iio/accel/cros_ec_accel_legacy.c | 40 +-
> drivers/iio/accel/kxcjk-1013.c | 10 +
> drivers/iio/accel/kxsd9.c | 4 +-
> drivers/iio/accel/mma8452.c | 2 +-
> drivers/iio/accel/st_accel_core.c | 2 +-
> drivers/iio/adc/Kconfig | 39 +-
> drivers/iio/adc/Makefile | 2 +
> drivers/iio/adc/ad7124.c | 2 +-
> drivers/iio/adc/ad7766.c | 22 +-
> drivers/{staging => }/iio/adc/ad7780.c | 179 ++++--
> drivers/iio/adc/ad7923.c | 24 +-
> drivers/iio/adc/ad_sigma_delta.c | 16 +-
> drivers/iio/adc/ingenic-adc.c | 4 +-
> drivers/iio/adc/lpc32xx_adc.c | 60 +-
> drivers/iio/adc/meson_saradc.c | 8 +
> drivers/iio/adc/mxs-lradc-adc.c | 2 +
> drivers/iio/adc/stm32-dfsdm-adc.c | 628 ++++++++++++++++-----
> drivers/iio/adc/stm32-dfsdm-core.c | 180 +++++-
> drivers/iio/adc/stmpe-adc.c | 362 ++++++++++++
> drivers/iio/adc/ti-ads7950.c | 219 ++++++-
> drivers/iio/adc/ti-ads8688.c | 2 +-
> drivers/iio/buffer/industrialio-buffer-cb.c | 10 +-
> drivers/iio/chemical/Kconfig | 12 +-
> drivers/iio/chemical/pms7003.c | 5 +
> .../iio/common/cros_ec_sensors/cros_ec_sensors.c | 12 +-
> .../common/cros_ec_sensors/cros_ec_sensors_core.c | 22 +-
> drivers/iio/common/ms_sensors/Kconfig | 2 +-
> drivers/iio/common/ssp_sensors/ssp_iio.c | 2 +-
> drivers/iio/counter/stm32-lptimer-cnt.c | 55 ++
> drivers/iio/dac/ad5064.c | 15 +-
> drivers/iio/dac/ti-dac5571.c | 2 +-
> drivers/iio/frequency/ad9523.c | 16 +-
> drivers/iio/gyro/bmg160_core.c | 21 +
> drivers/iio/gyro/bmg160_i2c.c | 9 +
> drivers/iio/gyro/itg3200_core.c | 20 +
> drivers/iio/gyro/mpu3050-core.c | 3 +-
> drivers/iio/humidity/Kconfig | 20 +-
> drivers/iio/imu/Makefile | 2 -
> drivers/iio/imu/{adis16400_core.c => adis16400.c} | 232 +++++++-
> drivers/iio/imu/adis16400.h | 215 -------
> drivers/iio/imu/adis16400_buffer.c | 101 ----
> drivers/iio/imu/adis16480.c | 435 +++++++++++++-
> drivers/iio/imu/adis_buffer.c | 40 ++
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 10 +-
> drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 10 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 10 +
> drivers/iio/industrialio-buffer.c | 24 +-
> drivers/iio/industrialio-core.c | 46 +-
> drivers/iio/industrialio-trigger.c | 5 +-
> drivers/iio/light/Kconfig | 274 ++++-----
> drivers/iio/light/cros_ec_light_prox.c | 12 +-
> drivers/iio/light/vcnl4000.c | 77 ++-
> drivers/iio/magnetometer/ak8974.c | 5 +-
> drivers/iio/magnetometer/ak8975.c | 13 +-
> drivers/iio/magnetometer/bmc150_magn.c | 21 +
> drivers/iio/magnetometer/hmc5843.h | 1 +
> drivers/iio/magnetometer/hmc5843_core.c | 20 +-
> drivers/iio/magnetometer/hmc5843_i2c.c | 7 +-
> drivers/iio/magnetometer/hmc5843_spi.c | 7 +-
> drivers/iio/potentiometer/Kconfig | 34 +-
> drivers/iio/potentiostat/lmp91000.c | 14 +-
> drivers/iio/pressure/bmp280-core.c | 6 +
> drivers/iio/pressure/cros_ec_baro.c | 11 +-
> drivers/iio/proximity/Kconfig | 12 +
> drivers/iio/proximity/Makefile | 1 +
> drivers/iio/proximity/as3935.c | 50 +-
> drivers/iio/proximity/mb1232.c | 272 +++++++++
> drivers/iio/temperature/Kconfig | 24 +-
> drivers/iio/temperature/Makefile | 1 +
> drivers/iio/temperature/max31856.c | 353 ++++++++++++
> drivers/iio/trigger/iio-trig-loop.c | 2 +-
> drivers/input/touchscreen/stmpe-ts.c | 66 +--
> drivers/mfd/Kconfig | 3 +-
> drivers/mfd/stmpe.c | 68 +++
> drivers/staging/iio/adc/Kconfig | 13 -
> drivers/staging/iio/adc/Makefile | 1 -
> drivers/staging/iio/adc/ad7192.c | 233 +++++---
> drivers/staging/iio/adc/ad7192.h | 9 -
> drivers/staging/iio/adc/ad7280a.c | 109 ++--
> drivers/staging/iio/impedance-analyzer/Kconfig | 2 +-
> drivers/staging/iio/impedance-analyzer/ad5933.c | 54 +-
> include/dt-bindings/iio/temperature/thermocouple.h | 16 +
> include/linux/iio/adc/ad_sigma_delta.h | 1 +
> include/linux/iio/driver.h | 1 +
> include/linux/iio/frequency/ad9523.h | 8 +-
> include/linux/iio/gyro/itg3200.h | 1 +
> include/linux/iio/iio.h | 4 +-
> include/linux/iio/imu/adis.h | 14 +
> include/linux/mfd/stmpe.h | 21 +
> 121 files changed, 4397 insertions(+), 1362 deletions(-)
> rename {drivers/staging/iio/Documentation => Documentation/ABI/testing}/sysfs-bus-iio-impedance-analyzer-ad5933 (56%)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
> create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
> create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
> create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
> create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16480.txt
> create mode 100644 Documentation/devicetree/bindings/iio/light/vcnl4000.txt
> delete mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt
> create mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
> create mode 100644 Documentation/devicetree/bindings/iio/temperature/max31856.txt
> create mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
> rename drivers/{staging => }/iio/adc/ad7780.c (63%)
> create mode 100644 drivers/iio/adc/stmpe-adc.c
> rename drivers/iio/imu/{adis16400_core.c => adis16400.c} (77%)
> delete mode 100644 drivers/iio/imu/adis16400.h
> delete mode 100644 drivers/iio/imu/adis16400_buffer.c
> create mode 100644 drivers/iio/proximity/mb1232.c
> create mode 100644 drivers/iio/temperature/max31856.c
> create mode 100644 include/dt-bindings/iio/temperature/thermocouple.h
next prev parent reply other threads:[~2019-04-01 21:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-01 20:59 [PULL] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle Jonathan Cameron
2019-04-01 21:04 ` Jonathan Cameron [this message]
2019-04-02 7:14 ` Greg KH
2019-04-02 9:57 ` Jonathan Cameron
2019-04-04 19:46 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190401220407.78d9b19c@archlinux \
--to=jic23@jic23.retrosnub.co.uk \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).