From: Jonathan Cameron <jic23@kernel.org>
To: Adam Michaelis <adam.michaelis@rockwellcollins.com>
Cc: linux-iio@vger.kernel.org, lars@metafoo.de,
michael.hennerich@analog.com, knaack.h@gmx.de, pmeerw@pmeerw.net,
robh+dt@kernel.org, mark.rutland@arm.com,
charles-antoine.couret@essensium.com, devicetree@vger.kernel.org,
brandon.maier@rockwellcollins.com,
clayton.shotwell@rockwellcollins.com
Subject: Re: [PATCH v3 5/5] iio: ad7949: Remove logic for config readback
Date: Sat, 18 May 2019 10:19:41 +0100 [thread overview]
Message-ID: <20190518101941.00f6f20a@archlinux> (raw)
In-Reply-To: <1557759185-167857-5-git-send-email-adam.michaelis@rockwellcollins.com>
On Mon, 13 May 2019 09:53:05 -0500
Adam Michaelis <adam.michaelis@rockwellcollins.com> wrote:
> The AD7949 has a feature to include the configuration register value
> used to generate the ADC sample. This feature is configurable, but do
> not see a good use case for it in the driver (neither did reviewing
> maintainers), so removing the supporting logic in order to simplify the
> driver.
>
> Signed-off-by: Adam Michaelis <adam.michaelis@rockwellcollins.com>
Excellent. For reference
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Waiting for Analog review on the whole series.
Thanks,
Jonathan
> ---
> V3:
> - First version of series with this patch. Maintainers agreed
> that this capability of the hardware is not useful and should
> be dropped from driver.
> ---
> drivers/iio/adc/ad7949.c | 22 ++--------------------
> 1 file changed, 2 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
> index d67033a008e5..bac16a2f7850 100644
> --- a/drivers/iio/adc/ad7949.c
> +++ b/drivers/iio/adc/ad7949.c
> @@ -102,24 +102,6 @@ static void ad7949_set_bits_per_word(struct ad7949_adc_chip *ad7949_adc)
> ad7949_adc->bits_per_word = 8;
> }
>
> -static bool ad7949_spi_cfg_is_read_back(struct ad7949_adc_chip *ad7949_adc)
> -{
> - if (!(ad7949_adc->cfg & AD7949_CFG_READBACK))
> - return true;
> -
> - return false;
> -}
> -
> -static int ad7949_message_len(struct ad7949_adc_chip *ad7949_adc)
> -{
> - int tx_len = 2;
> -
> - if (ad7949_spi_cfg_is_read_back(ad7949_adc))
> - tx_len += 2;
> -
> - return tx_len;
> -}
> -
> static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
> u16 mask)
> {
> @@ -129,7 +111,7 @@ static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
> struct spi_transfer tx[] = {
> {
> .tx_buf = &ad7949_adc->buffer,
> - .len = ad7949_message_len(ad7949_adc),
> + .len = 2,
> .bits_per_word = ad7949_adc->bits_per_word,
> }
> };
> @@ -197,7 +179,7 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
> struct spi_transfer tx[] = {
> {
> .rx_buf = &ad7949_adc->buffer,
> - .len = ad7949_message_len(ad7949_adc),
> + .len = 2,
> .bits_per_word = ad7949_adc->bits_per_word,
> }
> };
next prev parent reply other threads:[~2019-05-18 9:19 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-13 14:53 [PATCH v3 1/5] iio: ad7949: Fix dummy read cycle placement Adam Michaelis
2019-05-13 14:53 ` [PATCH v3 2/5] iio: ad7949: Support internal Vref Adam Michaelis
2019-05-18 9:07 ` Jonathan Cameron
2019-05-23 12:12 ` Alexandru Ardelean
2019-05-23 12:51 ` Ardelean, Alexandru
2019-05-13 14:53 ` [PATCH v3 3/5] dt-bindings: iio: ad7949: Add adi,reference-select Adam Michaelis
2019-05-14 18:23 ` Rob Herring
2019-05-18 9:07 ` Jonathan Cameron
2019-05-23 12:16 ` Alexandru Ardelean
2019-05-13 14:53 ` [PATCH v3 4/5] iio: ad7949: Fix SPI interfacing for 14-bit messages Adam Michaelis
2019-05-18 9:10 ` Jonathan Cameron
2019-05-23 12:39 ` Alexandru Ardelean
2019-05-13 14:53 ` [PATCH v3 5/5] iio: ad7949: Remove logic for config readback Adam Michaelis
2019-05-18 9:19 ` Jonathan Cameron [this message]
2019-05-23 11:47 ` [PATCH v3 1/5] iio: ad7949: Fix dummy read cycle placement Alexandru Ardelean
2019-05-24 11:49 ` Couret Charles-Antoine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190518101941.00f6f20a@archlinux \
--to=jic23@kernel.org \
--cc=adam.michaelis@rockwellcollins.com \
--cc=brandon.maier@rockwellcollins.com \
--cc=charles-antoine.couret@essensium.com \
--cc=clayton.shotwell@rockwellcollins.com \
--cc=devicetree@vger.kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael.hennerich@analog.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).