From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE, SPF_PASS,T_DKIMWL_WL_HIGH autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7E59EC282E3 for ; Sun, 26 May 2019 17:34:25 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 42B3621721 for ; Sun, 26 May 2019 17:34:24 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1558892065; bh=cjxs0x5g72KAdKRfhvddBBpkpRu4WLB1Kh/hW3pcvtM=; h=Date:From:To:Cc:Subject:In-Reply-To:References:List-ID:From; b=xo4WeWdk2RfRCF/6CoT0oIxIjgueVGONM19HiriAz/E4cdEIzs/h8Hs7JSgDoopQz bKpPUYcwsC+3LSTeKZvgfxid2u5YyrQAVCriDlaZR+D+HHaVkXa3KUZ9qKgqw+X6a7 VAF44ufDeC/PDriuQub5+9wsQdBiw4Ic83y5P1Yw= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727926AbfEZReX (ORCPT ); Sun, 26 May 2019 13:34:23 -0400 Received: from mail.kernel.org ([198.145.29.99]:58478 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727963AbfEZReX (ORCPT ); Sun, 26 May 2019 13:34:23 -0400 Received: from archlinux (cpc149474-cmbg20-2-0-cust94.5-4.cable.virginm.net [82.4.196.95]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 1FB9E20815; Sun, 26 May 2019 17:34:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1558892062; bh=cjxs0x5g72KAdKRfhvddBBpkpRu4WLB1Kh/hW3pcvtM=; h=Date:From:To:Cc:Subject:In-Reply-To:References:From; b=pumNv1n+HHTymjuFHiVXRAm7/dDr4x8rrDtBqviPSZjkShPQl9iE73XAFWG0Ymbn1 pT6fOZFj88ZJv3QQJi5Z6NBE9tpAy1yL/wl3NhVr46444ikK52ebgqJHLHEyMBurfX 9Jo33dgCv5X5J6pA6FA3TbhOMLadHVp1VxGk1oDE= Date: Sun, 26 May 2019 18:34:17 +0100 From: Jonathan Cameron To: Eddie James Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, joel@jms.id.au, lars@metafoo.de, knaack.h@gmx.de Subject: Re: [PATCH v4 1/3] iio: Add driver for Infineon DPS310 Message-ID: <20190526183417.4bdfabc7@archlinux> In-Reply-To: <1558404814-26078-2-git-send-email-eajames@linux.ibm.com> References: <1558404814-26078-1-git-send-email-eajames@linux.ibm.com> <1558404814-26078-2-git-send-email-eajames@linux.ibm.com> X-Mailer: Claws Mail 3.17.3 (GTK+ 2.24.32; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org On Mon, 20 May 2019 21:13:32 -0500 Eddie James wrote: > From: Joel Stanley >=20 > The DPS310 is a temperature and pressure sensor. It can be accessed over > i2c and SPI, but this driver only supports polling over i2c. >=20 > Signed-off-by: Eddie James > Signed-off-by: Joel Stanley Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > MAINTAINERS | 6 + > drivers/iio/pressure/Kconfig | 11 + > drivers/iio/pressure/Makefile | 1 + > drivers/iio/pressure/dps310.c | 468 ++++++++++++++++++++++++++++++++++++= ++++++ > 4 files changed, 486 insertions(+) > create mode 100644 drivers/iio/pressure/dps310.c >=20 > diff --git a/MAINTAINERS b/MAINTAINERS > index a2cd369..091eb49 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -7760,6 +7760,12 @@ W: http://industrypack.sourceforge.net > S: Maintained > F: drivers/ipack/ > =20 > +INFINEON DPS310 Driver > +M: Eddie James > +L: linux-iio@vger.kernel.org > +F: drivers/iio/pressure/dps310.c > +S: Maintained > + > INFINIBAND SUBSYSTEM > M: Doug Ledford > M: Jason Gunthorpe > diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig > index efeb89f..97976de 100644 > --- a/drivers/iio/pressure/Kconfig > +++ b/drivers/iio/pressure/Kconfig > @@ -52,6 +52,17 @@ config IIO_CROS_EC_BARO > To compile this driver as a module, choose M here: the module > will be called cros_ec_baro. > =20 > +config DPS310 > + tristate "Infineon DPS310 pressure and temperature sensor" > + depends on I2C > + select REGMAP_I2C > + help > + Support for the Infineon DPS310 digital barometric pressure sensor. > + It can be accessed over I2C bus. > + > + This driver can also be built as a module. If so, the module will be > + called dps310. > + > config HID_SENSOR_PRESS > depends on HID_SENSOR_HUB > select IIO_BUFFER > diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile > index c2058d7..d8f5ace 100644 > --- a/drivers/iio/pressure/Makefile > +++ b/drivers/iio/pressure/Makefile > @@ -9,6 +9,7 @@ obj-$(CONFIG_BMP280) +=3D bmp280.o > bmp280-objs :=3D bmp280-core.o bmp280-regmap.o > obj-$(CONFIG_BMP280_I2C) +=3D bmp280-i2c.o > obj-$(CONFIG_BMP280_SPI) +=3D bmp280-spi.o > +obj-$(CONFIG_DPS310) +=3D dps310.o > obj-$(CONFIG_IIO_CROS_EC_BARO) +=3D cros_ec_baro.o > obj-$(CONFIG_HID_SENSOR_PRESS) +=3D hid-sensor-press.o > obj-$(CONFIG_HP03) +=3D hp03.o > diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c > new file mode 100644 > index 0000000..9acfccb > --- /dev/null > +++ b/drivers/iio/pressure/dps310.c > @@ -0,0 +1,468 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +// Copyright IBM Corp 2019 > +/* > + * The DPS310 is a barometric pressure and temperature sensor. > + * Currently only reading a single temperature is supported by > + * this driver. > + * > + * https://www.infineon.com/dgdl/?fileId=3D5546d462576f34750157750826c42= 242 > + * > + * Temperature calculation: > + * c0 * 0.5 + c1 * T_raw / kT =C2=B0C > + * > + * TODO: > + * - Pressure sensor readings > + * - Optionally support the FIFO > + */ > + > +#include > +#include > +#include > + > +#include > +#include > + > +#define DPS310_DEV_NAME "dps310" > + > +#define DPS310_PRS_B0 0x00 > +#define DPS310_PRS_B1 0x01 > +#define DPS310_PRS_B2 0x02 > +#define DPS310_TMP_B0 0x03 > +#define DPS310_TMP_B1 0x04 > +#define DPS310_TMP_B2 0x05 > +#define DPS310_PRS_CFG 0x06 > +#define DPS310_TMP_CFG 0x07 > +#define DPS310_TMP_RATE_BITS GENMASK(6, 4) > +#define DPS310_TMP_PRC_BITS GENMASK(3, 0) > +#define DPS310_TMP_EXT BIT(7) > +#define DPS310_MEAS_CFG 0x08 > +#define DPS310_MEAS_CTRL_BITS GENMASK(2, 0) > +#define DPS310_PRS_EN BIT(0) > +#define DPS310_TEMP_EN BIT(1) > +#define DPS310_BACKGROUND BIT(2) > +#define DPS310_PRS_RDY BIT(4) > +#define DPS310_TMP_RDY BIT(5) > +#define DPS310_SENSOR_RDY BIT(6) > +#define DPS310_COEF_RDY BIT(7) > +#define DPS310_CFG_REG 0x09 > +#define DPS310_INT_HL BIT(7) > +#define DPS310_TMP_SHIFT_EN BIT(3) > +#define DPS310_PRS_SHIFT_EN BIT(4) > +#define DPS310_FIFO_EN BIT(5) > +#define DPS310_SPI_EN BIT(6) > +#define DPS310_RESET 0x0c > +#define DPS310_RESET_MAGIC 0x09 > +#define DPS310_COEF_BASE 0x10 > +#define DPS310_COEF_SRC 0x28 > + > +/* Make sure sleep time is <=3D 20ms for usleep_range */ > +#define DPS310_POLL_SLEEP_US(t) min(20000, (t) / 8) > +/* Silently handle error in rate value here */ > +#define DPS310_POLL_TIMEOUT_US(rc) ((rc) <=3D 0 ? 1000000 : 1000000 / (r= c)) > + > +#define DPS310_PRS_BASE DPS310_PRS_B0 > +#define DPS310_TMP_BASE DPS310_TMP_B0 > + > +/* > + * These values (defined in the spec) indicate how to scale the raw regi= ster > + * values for each level of precision available. > + */ > +static const int scale_factors[] =3D { > + 524288, > + 1572864, > + 3670016, > + 7864320, > + 253952, > + 516096, > + 1040384, > + 2088960, > +}; > + > +struct dps310_data { > + struct i2c_client *client; > + struct regmap *regmap; > + struct mutex lock; /* Lock for sequential HW access functions */ > + > + s32 c0, c1; > + s32 temp_raw; > +}; > + > +static const struct iio_chan_spec dps310_channels[] =3D { > + { > + .type =3D IIO_TEMP, > + .info_mask_separate =3D BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) | > + BIT(IIO_CHAN_INFO_SAMP_FREQ) | > + BIT(IIO_CHAN_INFO_PROCESSED), > + }, > +}; > + > +/* To be called after checking the COEF_RDY bit in MEAS_CFG */ > +static int dps310_get_temp_coef(struct dps310_data *data) > +{ > + int rc; > + u8 coef[3]; > + u32 c0, c1; > + > + /* > + * Read temperature calibration coefficients c0 and c1 from the > + * COEF register. The numbers are 12-bit 2's compliment numbers > + */ > + rc =3D regmap_bulk_read(data->regmap, DPS310_COEF_BASE, coef, > + sizeof(coef)); > + if (rc < 0) > + return rc; > + > + c0 =3D (coef[0] << 4) | (coef[1] >> 4); > + data->c0 =3D sign_extend32(c0, 11); > + > + c1 =3D ((coef[1] & GENMASK(3, 0)) << 8) | coef[2]; > + data->c1 =3D sign_extend32(c1, 11); > + > + return 0; > +} > + > +static int dps310_get_temp_precision(struct dps310_data *data) > +{ > + int rc; > + int val; > + > + rc =3D regmap_read(data->regmap, DPS310_TMP_CFG, &val); > + if (rc < 0) > + return rc; > + > + /* > + * Scale factor is bottom 4 bits of the register, but 1111 is > + * reserved so just grab bottom three > + */ > + return BIT(val & GENMASK(2, 0)); > +} > + > +/* Called with lock held */ > +static int dps310_set_temp_precision(struct dps310_data *data, int val) > +{ > + int rc; > + u8 shift_en; > + > + if (val < 0 || val > 128) > + return -EINVAL; > + > + shift_en =3D val >=3D 16 ? DPS310_TMP_SHIFT_EN : 0; > + rc =3D regmap_write_bits(data->regmap, DPS310_CFG_REG, > + DPS310_TMP_SHIFT_EN, shift_en); > + if (rc) > + return rc; > + > + return regmap_update_bits(data->regmap, DPS310_TMP_CFG, > + DPS310_TMP_PRC_BITS, ilog2(val)); > +} > + > +/* Called with lock held */ > +static int dps310_set_temp_samp_freq(struct dps310_data *data, int freq) > +{ > + u8 val; > + > + if (freq < 0 || freq > 128) > + return -EINVAL; > + > + val =3D ilog2(freq) << 4; > + > + return regmap_update_bits(data->regmap, DPS310_TMP_CFG, > + DPS310_TMP_RATE_BITS, val); > +} > + > +static int dps310_get_temp_samp_freq(struct dps310_data *data) > +{ > + int rc; > + int val; > + > + rc =3D regmap_read(data->regmap, DPS310_TMP_CFG, &val); > + if (rc < 0) > + return rc; > + > + return BIT((val & DPS310_TMP_RATE_BITS) >> 4); > +} > + > +static int dps310_get_temp_k(struct dps310_data *data) > +{ > + int rc =3D dps310_get_temp_precision(data); > + > + if (rc < 0) > + return rc; > + > + return scale_factors[ilog2(rc)]; > +} > + > +static int dps310_read_temp(struct dps310_data *data) > +{ > + int rc; > + int rate; > + int ready; > + int timeout; > + s32 raw; > + u8 val[3]; > + > + if (mutex_lock_interruptible(&data->lock)) > + return -EINTR; > + > + rate =3D dps310_get_temp_samp_freq(data); > + timeout =3D DPS310_POLL_TIMEOUT_US(rate); > + > + /* Poll for sensor readiness; base the timeout upon the sample rate. */ > + rc =3D regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, > + ready & DPS310_TMP_RDY, > + DPS310_POLL_SLEEP_US(timeout), timeout); > + if (rc < 0) > + goto done; > + > + rc =3D regmap_bulk_read(data->regmap, DPS310_TMP_BASE, val, sizeof(val)= ); > + if (rc < 0) > + goto done; > + > + raw =3D (val[0] << 16) | (val[1] << 8) | val[2]; > + data->temp_raw =3D sign_extend32(raw, 23); > + > +done: > + mutex_unlock(&data->lock); > + return rc; > +} > + > +static bool dps310_is_writeable_reg(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case DPS310_PRS_CFG: > + case DPS310_TMP_CFG: > + case DPS310_MEAS_CFG: > + case DPS310_CFG_REG: > + case DPS310_RESET: > + return true; > + default: > + return false; > + } > +} > + > +static bool dps310_is_volatile_reg(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case DPS310_PRS_B0: > + case DPS310_PRS_B1: > + case DPS310_PRS_B2: > + case DPS310_TMP_B0: > + case DPS310_TMP_B1: > + case DPS310_TMP_B2: > + case DPS310_MEAS_CFG: > + return true; > + default: > + return false; > + } > +} > + > +static int dps310_write_raw(struct iio_dev *iio, > + struct iio_chan_spec const *chan, int val, > + int val2, long mask) > +{ > + int rc; > + struct dps310_data *data =3D iio_priv(iio); > + > + if (chan->type !=3D IIO_TEMP) > + return -EINVAL; > + > + if (mutex_lock_interruptible(&data->lock)) > + return -EINTR; > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + rc =3D dps310_set_temp_samp_freq(data, val); > + break; > + > + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: > + rc =3D dps310_set_temp_precision(data, val); > + break; > + > + default: > + rc =3D -EINVAL; > + break; > + } > + > + mutex_unlock(&data->lock); > + return rc; > +} > + > +static int dps310_calculate_temp(struct dps310_data *data) > +{ > + s64 c0; > + s64 t; > + int kt =3D dps310_get_temp_k(data); > + > + if (kt < 0) > + return kt; > + > + /* Obtain inverse-scaled offset */ > + c0 =3D div_s64((s64)kt * (s64)data->c0, 2); > + > + /* Add the offset to the unscaled temperature */ > + t =3D c0 + ((s64)data->temp_raw * (s64)data->c1); > + > + /* Convert to milliCelsius and scale the temperature */ > + return (int)div_s64(t * 1000LL, kt); > +} > + > +static int dps310_read_raw(struct iio_dev *iio, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct dps310_data *data =3D iio_priv(iio); > + int rc; > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + rc =3D dps310_get_temp_samp_freq(data); > + if (rc < 0) > + return rc; > + > + *val =3D rc; > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_PROCESSED: > + rc =3D dps310_read_temp(data); > + if (rc) > + return rc; > + > + rc =3D dps310_calculate_temp(data); > + if (rc < 0) > + return rc; > + > + *val =3D rc; > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: > + rc =3D dps310_get_temp_precision(data); > + if (rc < 0) > + return rc; > + > + *val =3D rc; > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > +static void dps310_reset(void *action_data) > +{ > + struct dps310_data *data =3D action_data; > + > + regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC); > +} > + > +static const struct regmap_config dps310_regmap_config =3D { > + .reg_bits =3D 8, > + .val_bits =3D 8, > + .writeable_reg =3D dps310_is_writeable_reg, > + .volatile_reg =3D dps310_is_volatile_reg, > + .cache_type =3D REGCACHE_RBTREE, > + .max_register =3D DPS310_COEF_SRC, > +}; > + > +static const struct iio_info dps310_info =3D { > + .read_raw =3D dps310_read_raw, > + .write_raw =3D dps310_write_raw, > +}; > + > +static int dps310_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct dps310_data *data; > + struct iio_dev *iio; > + int rc, ready; > + > + iio =3D devm_iio_device_alloc(&client->dev, sizeof(*data)); > + if (!iio) > + return -ENOMEM; > + > + data =3D iio_priv(iio); > + data->client =3D client; > + mutex_init(&data->lock); > + > + iio->dev.parent =3D &client->dev; > + iio->name =3D id->name; > + iio->channels =3D dps310_channels; > + iio->num_channels =3D ARRAY_SIZE(dps310_channels); > + iio->info =3D &dps310_info; > + iio->modes =3D INDIO_DIRECT_MODE; > + > + data->regmap =3D devm_regmap_init_i2c(client, &dps310_regmap_config); > + if (IS_ERR(data->regmap)) > + return PTR_ERR(data->regmap); > + > + /* Register to run the device reset when the device is removed */ > + rc =3D devm_add_action_or_reset(&client->dev, dps310_reset, data); > + if (rc) > + return rc; > + > + /* > + * Set up external (MEMS) temperature sensor in single sample, one > + * measurement per second mode > + */ > + rc =3D regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); > + if (rc < 0) > + return rc; > + > + /* Temp shift is disabled when PRC <=3D 8 */ > + rc =3D regmap_write_bits(data->regmap, DPS310_CFG_REG, > + DPS310_TMP_SHIFT_EN, 0); > + if (rc < 0) > + return rc; > + > + /* MEAS_CFG doesn't update correctly unless first written with 0 */ > + rc =3D regmap_write_bits(data->regmap, DPS310_MEAS_CFG, > + DPS310_MEAS_CTRL_BITS, 0); > + if (rc < 0) > + return rc; > + > + /* Turn on temperature measurement in the background */ > + rc =3D regmap_write_bits(data->regmap, DPS310_MEAS_CFG, > + DPS310_MEAS_CTRL_BITS, > + DPS310_TEMP_EN | DPS310_BACKGROUND); > + if (rc < 0) > + return rc; > + > + /* > + * Calibration coefficients required for reporting temperature. > + * They are available 40ms after the device has started > + */ > + rc =3D regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, > + ready & DPS310_COEF_RDY, 10000, 40000); > + if (rc < 0) > + return rc; > + > + rc =3D dps310_get_temp_coef(data); > + if (rc < 0) > + return rc; > + > + rc =3D devm_iio_device_register(&client->dev, iio); > + if (rc) > + return rc; > + > + i2c_set_clientdata(client, iio); > + > + return 0; > +} > + > +static const struct i2c_device_id dps310_id[] =3D { > + { DPS310_DEV_NAME, 0 }, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, dps310_id); > + > +static struct i2c_driver dps310_driver =3D { > + .driver =3D { > + .name =3D DPS310_DEV_NAME, > + }, > + .probe =3D dps310_probe, > + .id_table =3D dps310_id, > +}; > +module_i2c_driver(dps310_driver); > + > +MODULE_AUTHOR("Joel Stanley "); > +MODULE_DESCRIPTION("Infineon DPS310 pressure and temperature sensor"); > +MODULE_LICENSE("GPL v2");