[PATCH 2/4] iio: ad7949: fix incorrect SPI xfer len

[Andrea Merello <andrea.merello@gmail.com>]

This driver supports 14-bits and 16-bits devices. All of them have a 14-bit
configuration registers. All SPI trasfers, for reading AD conversion
results and for writing the configuration register, fit in two bytes.

The driver always uses 4-bytes xfers which seems at least pointless (maybe
even harmful). This patch trims the SPI xfer len and the buffer size to
two bytes.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
---
 drivers/iio/adc/ad7949.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
index 518044c31a73..5c2b3446fa4a 100644
--- a/drivers/iio/adc/ad7949.c
+++ b/drivers/iio/adc/ad7949.c
@@ -54,7 +54,7 @@ struct ad7949_adc_chip {
 	u8 resolution;
 	u16 cfg;
 	unsigned int current_channel;
-	u32 buffer ____cacheline_aligned;
+	u16 buffer ____cacheline_aligned;
 };
 
 static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
@@ -67,7 +67,7 @@ static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
 	struct spi_transfer tx[] = {
 		{
 			.tx_buf = &ad7949_adc->buffer,
-			.len = 4,
+			.len = 2,
 			.bits_per_word = bits_per_word,
 		},
 	};
@@ -95,7 +95,7 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
 	struct spi_transfer tx[] = {
 		{
 			.rx_buf = &ad7949_adc->buffer,
-			.len = 4,
+			.len = 2,
 			.bits_per_word = bits_per_word,
 		},
 	};
-- 
2.17.1