From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: [PULL] 1st set of IIO fixes for the 5.4 cycle.
Date: Wed, 9 Oct 2019 19:32:39 +0100 [thread overview]
Message-ID: <20191009193239.694ff6ab@archlinux> (raw)
The following changes since commit b33f56a1e40588214320926293585f088fb390b0:
staging: rtl8723bs: hal: remove redundant variable n (2019-09-06 18:20:33 +0200)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.4a
for you to fetch changes up to a26e0fbe06e20077afdaa40d1a90092f16b0bc67:
iio: Fix an undefied reference error in noa1305_probe (2019-10-09 19:11:29 +0100)
----------------------------------------------------------------
First set of IIO fixes for the 5.4 cycle.
* adis16400
- Make sure to free memory on a few failure paths.
* adxl372
- Fix wrong fifo depth
- Fix wrong indexing of data from the fifo.
- Perform a reset at startup to avoid a problem with inconsistent state.
* axp288
- This is a fix for a fix. The original fix made sure we kept the
configuration from some firmwares to preserve a bias current.
Unfortunately it appears the previous behaviour was working around
a buggy firmware by overwriting the wrong value it had. Hence
a regression was seen.
* bmc150
- Fix the centre temperature. This was due to an error in one of the
datasheets.
* hx711
- Fix an issue where a badly timed interrupt could lead to a control
line being high long enough to put the device into a low power state.
* meson_sar_adc
- Fix a case where the irq was enabled before everything it uses was
allocated.
* st_lsm6dsx
- Ensure we don't set the sensor sensitivity to 0 as it will force
all readings to 0.
- Fix a wait time for the slave i2c controller when the accelerometer
is not enabled.
* stm32-adc
- Precursor for fix. Move a set of register definitions to a header.
- Fix a race when several ADCs are in use with some using interrupts
to control the dataflow and some using DMA.
* vcnl4000
- Fix a garbage of_match_table in which a string was passed instead
of the intended enum.
----------------------------------------------------------------
Andreas Klinger (1):
iio: adc: hx711: fix bug in sampling of data
David Frey (1):
iio: light: opt3001: fix mutex unlock race
Fabrice Gasnier (2):
iio: adc: stm32-adc: move registers definitions
iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
Hans de Goede (1):
iio: adc: axp288: Override TS pin bias current for some models
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity
iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller
Marco Felsch (3):
iio: light: fix vcnl4000 devicetree hooks
iio: light: add missing vcnl4040 of_compatible
iio: adc: ad799x: fix probe error handling
Navid Emamdoost (2):
iio: imu: adis16400: release allocated memory on failure
iio: imu: adis16400: fix memory leak
Pascal Bouwmann (1):
iio: fix center temperature of bmc150-accel-core
Remi Pommarel (1):
iio: adc: meson_saradc: Fix memory allocation order
Stefan Popa (3):
iio: accel: adxl372: Fix/remove limitation for FIFO samples
iio: accel: adxl372: Fix push to buffers lost samples
iio: accel: adxl372: Perform a reset at start up
zhong jiang (1):
iio: Fix an undefied reference error in noa1305_probe
drivers/iio/accel/adxl372.c | 22 ++++-
drivers/iio/accel/bmc150-accel-core.c | 2 +-
drivers/iio/adc/ad799x.c | 4 +-
drivers/iio/adc/axp288_adc.c | 32 +++++++
drivers/iio/adc/hx711.c | 10 +-
drivers/iio/adc/meson_saradc.c | 10 +-
drivers/iio/adc/stm32-adc-core.c | 70 ++++++++------
drivers/iio/adc/stm32-adc-core.h | 137 +++++++++++++++++++++++++++
drivers/iio/adc/stm32-adc.c | 109 ---------------------
drivers/iio/imu/adis_buffer.c | 10 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 28 ++++--
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 15 ++-
drivers/iio/light/Kconfig | 1 +
drivers/iio/light/opt3001.c | 6 +-
drivers/iio/light/vcnl4000.c | 14 ++-
16 files changed, 290 insertions(+), 182 deletions(-)
next reply other threads:[~2019-10-09 18:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 18:32 Jonathan Cameron [this message]
2019-10-10 9:21 ` [PULL] 1st set of IIO fixes for the 5.4 cycle Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191009193239.694ff6ab@archlinux \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox